Name of the RDBMS software owner not "oracle."

Similar Questions

• HP Photosmart 5515 all-in-one undetected by the HP software, driver not found by Windows Update

  Hello

  I have Windows 7 64 bit and a HP Photosmart 5515.

  I had to reformat my PC, and when I tried to install the printer, Windows Update has acknowledged, but cannot find the necessary drivers, while the HP software has not found the printer or with the IP address or the host name.

  The printer is connected to the network and works perfectly (we are able to print on my wife's computer), but on mine, it is not possible to connect.

  I tried both the complete Software Package system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108875-3&cc=us&DLC=en&LC=en...

  And the divers basic package:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108878-3&cc=us&DLC=en&LC=en...

  Is it possible to download a driver of "old school" so I can use it directly from the Device Manager in Windows 7?

  Hello

  Please try the following tool and post back the result:

  http://ftp.HP.com/pub/softlib/software12/COL50403/MP-122330-1/hppiw.exe

  Kind regards.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Vista HomePremium.SP2. Chnge workgroup option not available but may change the name of the computer. Can not enable file sharing. How Iactivate these options? Thanks in advance, Geoff

  Vista Home Premium.SP2. Working Group change option is not available on the system page, but I can only change the name of the computer. Can not turn on either file sharing. How to activate these options? Thanks in advance, Geoff

  Geoff

  1. If it is the domain controller, you cannot change the name of the computer by selecting network ID and this is normal.
  2. If it is a member of the computer in domain or workgroup, you don't have permission to change the name of the computer.
  .

  See this link for more information

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/a552c6f8-AB02-44e5-9FF9-471ebc7ac1c6/

• the sound software is not installed properly or has been disabled

  Hi, I have windows 7 and I try to run a program called history of eyewitness to the world its GSP or dorling kindersley, I get the error message saying the sound software is not installed or has been disabled.

  See:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I want to get only year sysdate with my name of the defined column. but not able to get it.

  I want to get only year sysdate with my name of the defined column. but not able to get it.

  SQL > select to_char (sysdate, 'yyyy') as 'mahesh tyagi' from dual;

  Mahé

  ----

  2015

  SQL > select to_char (sysdate, 'yy') as 'Manu' from dual;

  my

  --

  15

  So I couldn't do 'Manu' or "mahesh tyagi" as the column name.

  The column name is "mahesh tyagi" is simply displayed it shortened to sqlplus due to the known values in the column length.

  create table year_test select to_char (sysdate, 'yyyy') "mahesh tyagi" double;

  year_test / / DESC

  You can change the way sqlplus displays the header of column with something like

  column "mahesh tyagi" format a15

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• ORA-01504: name of the 'DEV1' database does not match parameter db_name "PROD1".

  Hi, all.
  
  This is my first time cloning of a database. Recovery finished, but gave me the following error message. All parameters in the pfile file are on 'DEV1 '. I think that the db_name "PROD1" parameter exists in the control file and causes this error. The control file is under ASM.
  
  How can I change the setting in the control file and raise the cloned database 'DEV1 '? Also, how can I avoid this problem next time I make a clone?
  
  Thanks in advance!
  
  
  Oracle 10g Release 2 under RHEL5
  
  Database cloning using RMAN Duplicate > ORA-01504: "DEV1" database name does not match "PROD1" db_name parameter
  

  ASMCMD> ls
  control01.ctl
  current.275.729098001

  archive log filename=/u001/dbsvr/dev1/1_131706_653848580.dbf recid=59 stamp=741953991
  media recovery complete, elapsed time: 00:09:31
  *Finished recover at 01-FEB-11*
  contents of Memory Script:
  {
     shutdown clone;
     startup clone nomount ;
  }
  executing Memory Script
  
  database dismounted
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  Oracle instance started
  
  Total System Global Area     725614592 bytes
  
  Fixed Size                     2075592 bytes
  Variable Size                448791608 bytes
  Database Buffers             268435456 bytes
  Redo Buffers                   6311936 bytes
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DEV1" RESETLOGS ARCHIVELOG
    MAXLOGFILES     50
    MAXLOGMEMBERS      5
    MAXDATAFILES      100
    MAXINSTANCES     1
    MAXLOGHISTORY     5445
   LOGFILE
    GROUP  1 '+DATA3/dev1/datafile/redo01.log' SIZE 100 M ,
    GROUP  2 '+DATA3/dev1/datafile/redo02.log' SIZE 100 M ,
    GROUP  3 '+DATA3/dev1/datafile/redo03.log' SIZE 100 M
   DATAFILE
    '+DATA3/dev1/datafile/system01.dbf'
   CHARACTER SET WE8ISO8859P1
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 02/01/2011 10:30:17
  RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
  ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
  
  RMAN>
  RMAN> **end-of-file**
  
  RMAN>

  db_name parameter and database name must match. There is an incorrect db_name parameter in your target pfile database file!
  Best: there should not be any db_name parameter at all.

  Note: the name of the database is also in the controlfile.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• Trying to enable and disable the scheduled tasks back but becomes "the name of the specified task * does not exist in the system.

  I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task

  SCHTASKS/Change/disable /TN ImageCopyTest
  ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.

  Running schtasks/query does not list the tasks that I have implemented in Task Scheduler

  For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task

  Can someone shed light on how I can get around what I need this operation for our recovery after disaster

  It's on Windows Server 2008 R2 Enterprise

  Hello

  Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.

  Thank you.

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Hallmark bonus software shows the latest version of Hallmark cards must be used and I did. But the Bonus software does not work.

  I bought for Hallmard Card Studio 2012 and received software bonus with most cards etc. When I tried to install the software of premium it says I have fearful to have installed the last Hallmark witn a 13. 1 something or other. I installed the latest version and I don't know what they mean. But they say that it has not been changed. What should I do?

  Hello

  What is you receive the exact error message?

  Method 1:

  I suggest you to uninstall all previous versions of the software and then reinstall the software on the computer and check if it helps.

  See the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2:

  If the method above does not work, then I suggest you to contact the support of software to improve assistance.

  http://www.hallmarksoftware.com/support/support.aspx?NetID=CJ&RS=48&preflanguage=5

• How can I delete my facebook contacts in my email? Receive a name-click, the button Delete is not lighted.

  How to remove Facebook and email contacts that I no longer use? When I click on a name, the button Delete is not lit so I can't use it. I clicked on my address book selected a contact but I couldn't delete the name.

  I use Windows Live Mail.

  Facebook doesn't allow other programs that can delete your friends.  If you want to unfriend someone to remove from the list, you must Access the site www.facebook.com and unfriend them directly.

• BlackBerry Smartphones Upgrade causes the connection Bluetooth to the desktop software does not work

  I'm a business traveler road warrior who lives and dies by my BlackBerry synced with my laptop.  I just spent most of November on the road and worked hard the BB and laptop.  The two worked perfectly.  I was able to sync the BB to the laptop with Bluetooth or USB cable and not problems.  Since I was AT & T, I could use the BB as a modem for laptop and get 3G service everywhere wherever I was going.  Life was good back in the day... November 2010.

  Then... I get some downtime and decide to meet the guests of the BlackBerry software desktop that there are updates available for the desktop software and software of the device of 9000 "BOLD".  I decided that since I have no immediate need and criticism so I can update.  So I update.

  I updated the software to version 5. something to 6.0.0.43 version.  Once the software has been updated, I get a prompt to upgrade the 9000 to a new version of software for device.  So I move from 4.6.something to 5.0.0.82 2.

  I do a couple of synchronization with the USB cable and I feel good.  Then I try to sync using bluetooth.  No joy.  Unable to get the desktop software to see the Blackberry.  The 9000 "BOLD" connects to Windows 7 OK and I can even use the laptop as a speaker.

  So I go through the "Add bluetooth device" menu and office procedures.  During the search of a device discoverable bluetooth, the 9000 "BOLD" is so I clicked and respond OK.  Then I went back to the Bluetooth Configuration screen where nothing appears.  I can't add the 9000 "BOLD" for Desktop software.  Something is not.

  Nothing is more exasperating to have everything to work perfectly, apply the updates recommended by the provider of the software, and then have things get broken and stop working.  Before after the Desktop software prompts to upgrade, I worked flawlessly.  After you apply the upgrade of Desktop software and device software upgrade, I can not connect with Bluetooth.

  I searched on the Internet until I no longer have to read in order to find a solution but can't seem to find a solution.  Maybe I'm just angry with RIM and these horrible upgrades that utility that I really liked.

  Let me answer a few questions before someone decides to help him.

  Is your BlackBerry detectable, so she can be found and associated with?  Yes, I updated the device discoverable.

  You can pair your BlackBerry with Windows 7 64 bit?  Yes.  No problem.  I can use the laptop running Windows 7 64 bit as a speaker with the BB.

  Could you have made other changes that may have caused the problem?  Nope.  I did not follow the guidelines of RIM in updgrading Desktop software and device software.  I suppose that, in this case, I followed the destruction of the RIM.

  You do backup your BlackBerry 9000 "BOLD" before upgrading the device software?  Yes.  I'm not stupid and don't trust any upgrade for the exact reasons, I'm writing on this forum.

  You have a Windows 7 restore set where you can go back to a point in time before you upgraded the Software Desktop 5 point. something to 6.0.0.43?  Yes.  I have a restore point.

  Do you have confidence that you can do both a restore of Windows 7 to get something back to 5. AND then to restore the device to 4.6.something?  Man, that thought makes me sick at heart.  I trust both RIM and MSFT to do their work and we know that RIM was screwed up, or I wouldn't be here today.

  Can anyone help with obtaining of BlackBerry Desktop Software 6.0.0.43 (updated 5.something) version to see and the pair with a BlackBerry 9000 "BOLD" which had 6.0.0.43 improve software 4.6.something to 5.0.0.82 device 2?

  It is confirmed.  5.0.0.82 2 is total c * p.  Who knows what complete insanity due to RIM out a such terrible and wounded many customers update.

  I was able to downgrade from 5.0.0.82 2 to 4.6.0.304.  Compatible bluetooth and connected seemlesly, even if the connection has been very sloew the order of minutes of time to the Desktop Manager.

  Here are the instructions to downgrade.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs.

  2. next, download and install the earlier version of the operating system. BlackBerry operating system downloads

  Find here the operating systems:

  http://BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  (I had to look for vendor.xml as I have Windows 7, but when I found and deleted things work as described).

  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  These instructions worked like a charm.  Connected to Desktop Manager and did a sync as soon as the 9000 "BOLD" restarted.  Apparently, the problem was my stupidly following the recommendation to upgrade the operating system to 5.0.0.82 2.

  ****************************************************************************************************

  I found these other topics in this forum.  A couple of them express my feelings.

  1. "BOLD" upgrade to the new OS 5.0 ATT, worked for six hours and now quite dead

  2 BOLD 9000 update

  3 bold 9000 problem after upgrade to 5.0

  4 KB24307
  It is a question has already been given that is reviewed by our development team. No resolution time is currently available.

  5. problem with 5.0.0.82 2

  Good comments in this thread!

  6. upgrade to 5.0.0.82 2 now no visual voicemail (ATT)
  Just another thing about the 5.0.0.82 2 upgrade... IT SUCKS DO NOT! The SMS is now garbage as it collects all text messages and combines a conversation and you cannot choose to delete or restart without deleting the text entering of this person and everything behind it. Until the Bugs are worked out stay away 5.0 versions (anything ending in par.822 and earlier) just my 2 cents worth

  7. problems with the new OS 2 and put 5.0.0.82 at level of the desktop software?

  Good comments in this thread!
  8 losing sound on 9000 "BOLD" after downloading the OS 5.0
  I suggest that you go to 4.6 this latest OS 5.0.0.82 2 is broken.  RIM has published a BONE broken to the unsuspecting public.

• Names of the fonts appears only not with the update

  I have a Mac and recently updated my system to El Capitan 10.11.5. I have Adobe Illustrator CS5.1. Since the update, the type face names do not appear on the character Panel. Now what you see is the true type symbol or an "o". How to restore the names of the faces to the drop-down list character Panel? Thank you.

  Go to System Preferences > accessibility > display and check the box that says reduce transparency.

• If the name of the document contains, but NOT this

  I am trying to write the following script:

  If the name of the document contains 'before' and 'square', has.

  If the name of the document contains "recto" and NOT "square", do B.

  If the name of the document contains "back" and "square, do C.

  If the name of the document contains 'back' and 'square', NOT do D.

  Here is the code with the conditionals in the same order:

  for (i = 0; i < documents.length; i++){
      var curDoc = app.activeDocument = app.documents[i];
      var workingName = curDoc.name;
      if(workingName.match(/^*(front)*$/) != null && workingName.match(/^*(square)*$/) != null) {...} 
      if(workingName.match(/^*(front)*$/) != null && workingName.match(/^*(square)*$/) == null) {...} 
      if(workingName.match(/^*(back)*$/) != null && workingName.match(/^*(square)*$/) != null) {...} 
      if(workingName.match(/^*(back)*$/) != null && workingName.match(/^*(square)*$/) == null) {...} 
  }
  

  However, these ARE not return true and false as expected. As far as I know, taken individually, each regex match ground works.  I suspect that the problem lies in the & &, == null, and! = null shares, but am a bit of a loss.

  Specifically, a file named "before. TIF"is evaluated as TRUE for this condition:

  if(workingName.match(/^*(front)*$/) != null && workingName.match(/^*(square)*$/) != null) 
  

  If(workingName.match(/^*(front)*$/)! = null & & workingName.match(/^*(square)*$/)! = null) {...}

  It makes no sense, it does NOT contain the word "square" for the second half of this condition and thus the entire thing, must be set to false. Instead it's the treatment the & & (and) one | (or).

  Is (regexMatch! = null & & otherRegexMatch! = null) wrong approach?

  I tried with this and the tiff was not serious:

  #target photoshop
  for (i = 0; i < documents.length; i++){
      var curDoc = app.activeDocument = app.documents[i];
      var workingName = curDoc.name;  
  
      if(workingName.match(/(front)/g) && workingName.match(/(square)/g)) {alert(workingName +'   ' +1 +'   '+ workingName.match(/(front)/g) + '   '+workingName.match(/(square)/g) )}
      if(workingName.match(/(front)/g) && !workingName.match(/(square)/g)) {alert(workingName +'   ' +2 +'   '+ workingName.match(/(front)/g) + '   '+workingName.match(/(square)/g) )}
      if(workingName.match(/(back)/g) && workingName.match(/(square)/g)) {alert(workingName +'   ' +3)}
      if(workingName.match(/(back)/g) && !workingName.match(/(square)/g)) {alert(workingName +'   ' +4)}
      }