BlackBerry Smartphones Upgrade causes the connection Bluetooth to the desktop software does not work

I'm a business traveler road warrior who lives and dies by my BlackBerry synced with my laptop.  I just spent most of November on the road and worked hard the BB and laptop.  The two worked perfectly.  I was able to sync the BB to the laptop with Bluetooth or USB cable and not problems.  Since I was AT & T, I could use the BB as a modem for laptop and get 3G service everywhere wherever I was going.  Life was good back in the day... November 2010.

Then... I get some downtime and decide to meet the guests of the BlackBerry software desktop that there are updates available for the desktop software and software of the device of 9000 "BOLD".  I decided that since I have no immediate need and criticism so I can update.  So I update.

I updated the software to version 5. something to 6.0.0.43 version.  Once the software has been updated, I get a prompt to upgrade the 9000 to a new version of software for device.  So I move from 4.6.something to 5.0.0.82 2.

I do a couple of synchronization with the USB cable and I feel good.  Then I try to sync using bluetooth.  No joy.  Unable to get the desktop software to see the Blackberry.  The 9000 "BOLD" connects to Windows 7 OK and I can even use the laptop as a speaker.

So I go through the "Add bluetooth device" menu and office procedures.  During the search of a device discoverable bluetooth, the 9000 "BOLD" is so I clicked and respond OK.  Then I went back to the Bluetooth Configuration screen where nothing appears.  I can't add the 9000 "BOLD" for Desktop software.  Something is not.

Nothing is more exasperating to have everything to work perfectly, apply the updates recommended by the provider of the software, and then have things get broken and stop working.  Before after the Desktop software prompts to upgrade, I worked flawlessly.  After you apply the upgrade of Desktop software and device software upgrade, I can not connect with Bluetooth.

I searched on the Internet until I no longer have to read in order to find a solution but can't seem to find a solution.  Maybe I'm just angry with RIM and these horrible upgrades that utility that I really liked.

Let me answer a few questions before someone decides to help him.

Is your BlackBerry detectable, so she can be found and associated with?  Yes, I updated the device discoverable.

You can pair your BlackBerry with Windows 7 64 bit?  Yes.  No problem.  I can use the laptop running Windows 7 64 bit as a speaker with the BB.

Could you have made other changes that may have caused the problem?  Nope.  I did not follow the guidelines of RIM in updgrading Desktop software and device software.  I suppose that, in this case, I followed the destruction of the RIM.

You do backup your BlackBerry 9000 "BOLD" before upgrading the device software?  Yes.  I'm not stupid and don't trust any upgrade for the exact reasons, I'm writing on this forum.

You have a Windows 7 restore set where you can go back to a point in time before you upgraded the Software Desktop 5 point. something to 6.0.0.43?  Yes.  I have a restore point.

Do you have confidence that you can do both a restore of Windows 7 to get something back to 5. AND then to restore the device to 4.6.something?  Man, that thought makes me sick at heart.  I trust both RIM and MSFT to do their work and we know that RIM was screwed up, or I wouldn't be here today.

Can anyone help with obtaining of BlackBerry Desktop Software 6.0.0.43 (updated 5.something) version to see and the pair with a BlackBerry 9000 "BOLD" which had 6.0.0.43 improve software 4.6.something to 5.0.0.82 device 2?

It is confirmed.  5.0.0.82 2 is total c * p.  Who knows what complete insanity due to RIM out a such terrible and wounded many customers update.

I was able to downgrade from 5.0.0.82 2 to 4.6.0.304.  Compatible bluetooth and connected seemlesly, even if the connection has been very sloew the order of minutes of time to the Desktop Manager.

Here are the instructions to downgrade.

1 remove the newer operating system of your PC by going to control panel > Add/Remove programs.

2. next, download and install the earlier version of the operating system. BlackBerry operating system downloads

Find here the operating systems:

http://BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

3. install the older operating system to the computer by running (double click) the downloaded file.

4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

(I had to look for vendor.xml as I have Windows 7, but when I found and deleted things work as described).

5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

These instructions worked like a charm.  Connected to Desktop Manager and did a sync as soon as the 9000 "BOLD" restarted.  Apparently, the problem was my stupidly following the recommendation to upgrade the operating system to 5.0.0.82 2.

****************************************************************************************************

I found these other topics in this forum.  A couple of them express my feelings.

1. "BOLD" upgrade to the new OS 5.0 ATT, worked for six hours and now quite dead

2 BOLD 9000 update

3 bold 9000 problem after upgrade to 5.0

4 KB24307
It is a question has already been given that is reviewed by our development team. No resolution time is currently available.

5. problem with 5.0.0.82 2

Good comments in this thread!

6. upgrade to 5.0.0.82 2 now no visual voicemail (ATT)
Just another thing about the 5.0.0.82 2 upgrade... IT SUCKS DO NOT! The SMS is now garbage as it collects all text messages and combines a conversation and you cannot choose to delete or restart without deleting the text entering of this person and everything behind it. Until the Bugs are worked out stay away 5.0 versions (anything ending in par.822 and earlier) just my 2 cents worth

7. problems with the new OS 2 and put 5.0.0.82 at level of the desktop software?

Good comments in this thread!
8 losing sound on 9000 "BOLD" after downloading the OS 5.0
I suggest that you go to 4.6 this latest OS 5.0.0.82 2 is broken.  RIM has published a BONE broken to the unsuspecting public.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones middle of the space bar does not work?

    Hi all

    I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

    I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

    Is this a problem with my specific blackberry or this entire line has this problem?

    I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

    Thank you all!

    Hi and welcome to the Forums!

    I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

    If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

    I hope this helps!

    If this answers your question, please close the message by using the options on the key of the kudo.

    Thank you very much!

  • Hallmark bonus software shows the latest version of Hallmark cards must be used and I did. But the Bonus software does not work.

    I bought for Hallmard Card Studio 2012 and received software bonus with most cards etc. When I tried to install the software of premium it says I have fearful to have installed the last Hallmark witn a 13. 1 something or other. I installed the latest version and I don't know what they mean. But they say that it has not been changed. What should I do?

    Hello

    What is you receive the exact error message?

    Method 1:

    I suggest you to uninstall all previous versions of the software and then reinstall the software on the computer and check if it helps.

    See the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

    Method 2:

    If the method above does not work, then I suggest you to contact the support of software to improve assistance.

    http://www.hallmarksoftware.com/support/support.aspx?NetID=CJ&RS=48&preflanguage=5

  • BlackBerry Smartphones running Windows 7 and have Curve 8530 Desktop Manager does not reconginze usb connection

    Help!

    I have the Verizon Wireless 8530, I am running Windows 7.  When I opened the Desktop Manager and connect my phone to the computer shows it but not responsible office.  I uninstalled the Office Manager and reinstalled, I also rebooted the computer still nothing.

    I plug my husbands pearls in and it connects fine.

    Can someone help me please?

    I did remove and reinstall everything and I tried Office Manager just to see if there was a problem there. It still does not work.

    I have just started and went into my computer and click on the device and went out and the drivers updated again and this time it worked.  I hope it stays like that now.

    Thank you

  • Display the Properties dialog box when you click the icons on the desktop, but does not work

    I use windows vista. This morning after a normal start, any time I click on a desktop icon to open the properties of this program, but not the program itself. What happens to all the icons.

    Hi AmyWilliams,

    1. you remember to make changes to the computer before this problem?

    2 are you able to open the program when you right-click on it and select open?

    Step 1:

    You can check the following link and try to run the Fixit and check:

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Step 2:

    Given that this issue has started recently, you can also try a system restore and check.

    You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

  • HP OFFICEJET: THE DESKTOP ICON DOES NOT WORK

    I've always had a desktop icon, click to open the control panel of HP to start using the printer.

    For some reason, does not appear when I click the icon that the fist label appears quickly, now disappears and the control panel. It is not important for printing, but it is necessary for the analysis.

    I uninstalled and reinstalled all software, but it does not help.

    HELP PLEASE

    Hello

    What is your printer model?

    Which icon you click when no respionse can't?

    Assuming that you are referring to the HP Solution Center software, uninstall KB31323372 from the control panel > programs and features > view installed updates.

    Then, hide it using the following steps to prevent it from reinstalling:

    https://support.Microsoft.com/en-us/KB/3073930

    If you are not sure or refer to any other icon misfunctional please specify accordingly and DO NOT uninstall any element yet.

    Shlomi

  • BlackBerry smartphone how to stop wi - fi icon, and remember, it does not work

    I just got my Bold 9900.  I had set up the wi - fi for when I'm at home, for home networking.  But then I heard that takes a lot of battery power, and that I should make sure he seeks not when I'm not home.  So I disabled the connection of wi - fi.  The icon remained well on my home screen.  I went back and deleted the connection.  The wi - fi icon is still there.

    It just means that it might work for wi - fi, if I decide to search and connect?  I wonder, because until my battery seems to be declining fast enough.

    Is it gray, or what?

    Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

    Now, go back to your connection management screen and confirm that your WiFi is indeed off, unchecked.

  • BlackBerry smartphones, I have an e-mail account configured, but it does not work

    I get the case for one of my email accounts based on the web, I tripple checked all the settings, but my bold 9780 will not accept my settings, its really frustrating, especailly as he worked on my different address.

    advice, it's a small business e-mail that got only 4 people so we are greeted so digitalpacific.com.au but they have our own email address.

    Via the BIS website, you should try so, advanced integration:

    •  KB10154 How to integrate a POP or IMAP e-mail via advanced integration account

    The first section of the KB shows the method on the device, so this is the second section (for the BIS Web site) you want. In step 3, you must sometimes, faking out by providing your email address valid but password invalid... then it should return the same screen, but with the extra selection in step 5 (for the "additional settings"). If you do not know your settings, check your PC email client or check with your email service provider.

    Good luck!

  • Creative cloud updated the desktop app does not work but but also quit smoking. On Mac 10.9.5.

    Downloaded update two days ago. Now the menu bar icon is grayed out. When you click on it there's only an icon of spinning. Quitting smoking is grayed out and help and Open Window do nothing. There is no way I can see to do a force quit.

    I tried access to read/write setting for libraries and tried to uninstall, but I get an error message saying that the program to run on my computer applications, so it cannot be uninstalled.

    Like I can't quit I don't know what to do.

    Thank you

    Launch the activity monitor and force them to leave Adobe all processes as Cloud Creative Core Sync, AAMupdater, Adobe Crash Demon... etc



    Use the link below and run CC uninstaller and uninstall the Adobe Creative Cloud application:

    Using creative cloud | Uninstall the creative cloud desktop application

    Follow the procedure below:

    N ° 1)

    Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

    (Applications > Utiliites)

    Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

    Step 2)

    Trash Adobe Creative cloud from Applications Eh well.

    Step 3)

    (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

    (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

    ~/Library

    (3) then navigate to Application Support > Adobe.

    Open the Adobe folder and 2 trash files named AAMUpdater and OOBE.

    Step 4)

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.

    (2) you will get a text box, type in the following command and then press the 'return '.

    / Library

    (3) then navigate to Application Support > Adobe.

    Open file Adobe and trash 3 folders named AAMUpdater ,Adobe Application Manager and OOBE.

    Step 5)

    Click on the link below and download & run the cleaning of Adobe tool:

    If necessary, select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

    https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

    Step 6)

    (1) if it please click on the icon of the Apple menu and select System Preferences, then click Network.

    (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

    (3) then click on the Advanced button, then click proxies.

    (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck 'use passive FTP Mode (PASV) ". "

    (5) then click on the Apply Now button.

    Step 7)

    Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

    https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  • BlackBerry Torch Smartphone 9860 all the funcation key does not

    Dear all, I have my torch 9860 and facing a serious issue that all track pad and keys, including the menu key, the escape key, call key, lock screen and volume keys keys do not work. However, its touch screen works very well and you can write words by using the keyboard. You can also scroll by using the touch pad, but when you press keypad enter the command, it does not work. Kindly help on this issue.  I also reinstalled OS 7.1 but not sucecess.

    Please note that once push the ESC key to enter secure mode the handset run in safe mode. It measn if the leak is defective then why does device to the SafeMode pressing escape key.

    Please help me solve this problem.

    I recommend reloading your operating system.  To do this, connect your phone to your PC via USB and open BlackBerry Desktop Software.  The first thing you need to do is a backup of the data.  When your phone has been recognized, click device at the top, and then click Backup.  Once the backup is complete, restore your phone by clicking on the device and then restore.  Choose the most recent retore point and load.  Because your 'back' button works for your phone Safe Mode, we know that this is not a hardware problem, in order to restore your phone should solve the problem.

    Give it a shot and keep us updated on your progress.

  • BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

    I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

    This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

    All software are up to date on Mac and BBZ10

    What should I do?

    You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

    Let us know if that helps you.

  • can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

    Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

    I found this in another thread that you created [*]:

    I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

    I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

  • screen capture on the iphone 6 does not work after 9.2.1 upgrade

    screen capture on the iphone 6 does not work after 9.2.1 upgrade

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Try to do a screenshot, once more.

  • Connection problem: The DHCP service does not work.

    Original title: connection problem

    After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

    Hello

    Follow these steps and check if they help.

    Step 1:

    Look for the DHCP Client service and DNS Client Services if they are started.

    a. Click Start.
    b. click on run and type Services.
    c. click right on - run as administrator.

    Check if the below mentioned services has mentioned State and type start.

    Client DHCP started Automatic\Manual.
    Client DNS started Automatic\Manual.

    Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

    To verify that double-click the service, and click the Dependencies tab.

    Step 2:

    I suggest you to reset TCP/IP settings to solve the problem.

    How to reset the Protocol Internet (TCP/IP)

  • Only the left speaker does not work on Satellite A300

    Hello

    I have a problem with my Toshiba Satellite A300: the left speaker does not work but the right to a good job.

    I think that this is not a software problem because reinstalling driver does not solve the problem, and I have the same problem with a Ubuntu live CD, also is not a sound card problem because his work well with a headphones or an external speaker.

    The cause is probably a coward of connection between the left speaker and sound card.

    Please tell me what to do.
    I can fix it without sending the laptop of Toshiba ASP?

    Hello

    If you ask for an opinion, so here's one;
    I think that it s speaker malfunction, I doubt that it s a loose connection or something like that and I would not recommend trying to fix this problem yourself.
    First of all, know all you n t that's exactly wrong, and second, you will lose your warranty and could damage other parts if you would disassemble the laptop.

    In this case, the ASP in one and only one good way to solve this problem.
    Contact the guy and ask him for the handling of the Fryer!

    Good luck

Maybe you are looking for