Name of the window to variable

Similar Questions

• Chm file met poster "HTML help" on the title instead of the name of the window bar

  Chm file met poster "HTML help" on the title instead of the name of the window bar.

  I tried several ways such as:

  1. modify the > project name settings and also set the language to English (United States).

  2. check the name of the title in the .hhp file

  3. use the window while compling.

  4 Robohelp language settings.

  5. also uninstalled and reinstalled robophelp.

  But nothing helps

  Title name appear correctly if the same project is compiled on another machine.

  When the code in the high hydrostatic pressure and the locale on a correspondence of PC, the title OK is displayed. Or the other way around is also worth the title help is displayed in the language specified in the project IF (and only if) the regional settings of the computer matches the language. Otherwise, the "HTML Help" is displayed.

  Hope this helps.

  Thank you and best regards,

  Rahul Karn

• There is no diamonds next to the name of the windows in the window menu.

  When I reduce a window, I don't see a diamond next to the window menu. I see the diamond next to page name in the menu of the icon in the dock, but not in the menu of the window itself, which is what I use to select windows. Attached are pictures of the menu icon dock vs the window menu.

  I want to know whether or not the windows are reduced. I reduce windows that I don't need right now, and I don't want to have to scan the list of all the windows to find what I want, I want to know which windows I still have maximized immediately.

  However, I am interested in Firefox now on another machine, and it is not here do either, so it is possible, is not a behavior that is from Firefox, only Chrome and Safari.

• How can I get the profile name in the window title bar?

  I have run several sessions of Firefox with different profiles.
  (I start Firefox with: firefox - ProfileManager-no-remote)

  I would like to have the profile name in the title bar of the window, so when I switch between windows and try to find the good session + Gnome3 acitivities profile, I can see the name of the profile.

  Is this possible in Firefox 10 somehow via configuration settings (subject: config) of a certain extension, or with a command-line parameter?

  See:

  • Nightly Test Tools: https://addons.mozilla.org/firefox/addon/nightly-tester-tools/

  You can have a user agent that is corrupt and which identifies you as Firefox 3.0.3 (rv:1.9.0.3) and Firefox/4.0

  • Mozilla/5.0 (X 11; U; Linux i686; en-US; RV:1.9.0.3) Gecko/20100101 Firefox/4.0 Ubuntu/8.04

  See:

  • https://support.Mozilla.org/KB/finding+your+Firefox+version
  • https://support.Mozilla.org/KB/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Change the name of the windows at the bottom of the login screen edition

  How could change the name of the edition of windows that appears at the bottom of the login screen of Windows 7? don't ask why, but how could he change? Look at the bottom of this photo and it says "Windows 7 Home Basic,"

  and I would change it to "Windows 7 Professional".

  Hello Sean,.

  Thanks for the Microsoft Community assistance approach.

  I understand you have questions related to the modification of the edition of Windows is displayed on the logon screen. I would definitely answer your question.

  The edition of Windows is displayed on the logon screen is based on the windows edition installed on the computer.

  You will not be able to replace the edition on the screen to login manually. You need to install a different version of Windows to display the name of Windows special edition on the logon screen.

  I hope that I have answered your question. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Name of the instances of Variables

  Hello
  
  I am very new to Flash and ActionScript, but I have a background in Server programming and web client-side applications, if at least I'm not completely helpless.
  
  I am trying to figure when an Instance name becomes available for ActionScript code, so I can modify it.
  
  I have a Clip in scene 1-> image 10, in this Clip, the Frame 10, I have an empty clip that I am trying to load a .swf in. I can actually load the .swf in there if I put the code to load it into the same framework that I display the .swf, but I want it to be completely loaded before moving into this framework.
  
  By trial and error, which I made so he can do what I need to put the instance in the frame 1 and setting it's alpha to 0, so it is not slammed shut. This solution seems not very portable for me.
  
  Is there a "correct" way to load a file into a Clip until it gets instantiated? Or, what are the different ways people get around this problem? This 'solution' that I found works in this particular case, but there are a few similar cases in this project where it would be all just too heavy.
  
  Thank you
  Chris
  

  Chris,

  > By trial and error, I managed to make it act
  > like I need to put the instance in frame 1 and setting
  > It's alpha to 0, so it is not slammed shut.

  It is the way to do it, for the better or worse. The metaphor of the timeline is
  a powerful for animation, but it can be confusing in terms of
  programming. The name of the instance becomes a variable automatically for you,
  and that happens when the playhead enters that frame.

  > This solution seems not very portable for me.

  I can see that. ;) One of the oddities.

  > Is there a "correct" way to load a file into a Clip before
  > It gets instantiated?

  Before it is instantiated, there is nothing (no MovieClip instance) for
  Load the content in.

  > Or, what are the different ways people get around this
  > question? This 'solution' that I found works especially
  > case, but there are a few similar cases in this project where the
  > It would be simply too heavy.

  The MovieClip.createEmptyMovieClip () method to create a MovieClip
  instance during execution. Maybe it's a way to go. You can also extend
  MovieClip and associated with your submarine of the class with this particular movie clip assets
  in the library (right-click and look at properties or a link...). In this way
  your sub class can assign this instance invisible until needed otherwise.

  But the solution that you have already found is a typical no-frills approach.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• How to get the name of the window?

  Hello
  
  How can I get the name of the current window in forms?
  
  Thank you

  You can get the name of the current item to the help: SYSTEM. CURSOR_ITEM.
  With which you can make a

  vcCanvas:=GET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM, ITEM_CANVAS);
  

  With this canvasname you can make a

  vcWindow:=GET_VIEW_PROPERTY(vcCanvas, WINDOW_NAME);
  

• How to change the name of the windows task bar?

  Hi all

  I want to change the name of the task bar in my laptop.
  no idea how to do, please help me.
  Concerning
  Karthik M

  This option is not available in Vista and Win 7.

  I'm sorry.

• Sorting of files by name in the window 'open '.

  When I go to open a file or folder, the list is sorted by the most recent files / records consulted, instead of by its name, as it used to be.  I can't give this parameter to list by name (alphabetically).

  Hello

  Click a folder in my computer, to organize the way you want (I mean - by name - click View - Arrange Icon by...) then click on tools-> Folder Options-> view-> apply to all folders. Close all open windows, and should now be fixed.

  I hope this helps.

• How to replace the name of the column with variable

  Hello

  I have a PLSQL problem please.

  I have a table like this:

  IDENT LIBL_1 MONT_1 LIBL_2 MONT_2 LIBL_3 MONT_3 LIBL_4 MONT_4

  1               A          10               B               10          C               30               VIDE          0

  2               A          30               C               12          VIDE          0                 VIDE          0

  3               B          11               C               41          D               63               E               15

  ...

  I have a code like this:

  DECLARE

  x number;

  varchar2 column (20);

  CURSOR c_DPLT_TT_ICARE_FILL IS

  SELECT IDENT,

  LIBL_1,

  MONT_1,

  LIBL_2,

  MONT_2,

  LIBL_3,

  MONT_3,

  LIBL_4,

  MONT_4

  FROM MyTable;

  --

  l_mylist c_mycursor % ROWTYPE;

  BEGIN

  FOR l_mylist in c_mycursor LOOP

  x: = 1;

  the following: = "LIBL_" | x;

  WHILE ((l_mylist.colonne <>'EMPTY') OR (x < = 4)) LOOP

  -CODE-

  ...

  -CODE-

  x: = x + 1;

  the following: = "LIBL_" | x;

  END LOOP;

  END LOOP;

  The thing I want to do is to replace the name of column LIBL_1, LIBL_2... with a variable like this: = "LIBL_1" then value: = l_mylist.colonne to get the value of the LIBL_1.

  I tried manyu command but I can't find the solution. I even try an immediate execution but it seems that the list of cursor is unknown in the statement immediately execute.

  Anyone has a solution please?

  Thank you very much.

  user6390927 wrote:

  Hello

  I have a PLSQL problem please.

  I have a table like this:

  IDENT LIBL_1 MONT_1 LIBL_2 MONT_2 LIBL_3 MONT_3 LIBL_4 MONT_4

  1               A          10               B               10          C               30               VIDE          0

  2               A          30               C               12          VIDE          0                 VIDE          0

  3               B          11               C               41          D               63               E               15

  ...

  I have a code like this:

  DECLARE

  x number;

  varchar2 column (20);

  result mytable.libl_1%type;

  CURSOR c_DPLT_TT_ICARE_FILL IS

  SELECT IDENT,

  LIBL_1,

  MONT_1,

  LIBL_2,

  MONT_2,

  LIBL_3,

  MONT_3,

  LIBL_4,

  MONT_4

  FROM MyTable;

  --

  l_mylist c_mycursor % ROWTYPE;

  BEGIN

  FOR l_mylist in c_mycursor LOOP

  x: = 1;

  the following: = "LIBL_" | x;

  run immediately 'select'. the following: ' from mytable where ident =: b ' as a result using l_mylist.ident;

  WHILE ((result <> 'EMPTY') OR (x)<= 4)="" )="">

  -CODE-

  ...

  -CODE-

  x: = x + 1;

  the following: = "LIBL_" | x;

  END LOOP;

  END LOOP;

  The thing I want to do is to replace the name of column LIBL_1, LIBL_2... with a variable like this: = "LIBL_1" then value: = l_mylist.colonne to get the value of the LIBL_1.

  I tried manyu command but I can't find the solution. I even try an immediate execution but it seems that the list of cursor is unknown in the statement immediately execute.

  Anyone has a solution please?

  Thank you very much.

  Asuming LIBL_x columns have the same type or a base at least type

  then the changes above can help you.

  In addition, you can write your cursor loop in a loop "for i in (select...)."

  you don't need to write that match the code, but it is cosmetic.

  See you soon

  Karlheinz

• Retrieve the name of the Windows user

  Hi, I want to do not proceed with the connection of Apex application (how to proceed is covered in docs), but rather looking for the connection of the users of the xp operating system. (ie the connection information that is displayed in xp, when you press Ctrl + alt + delete)
  
  This windows login name is then compared with a users table in the database to determine access to the application and the different functions thanks to the application.
  
  Someone knows how this connection name can be extracted from the BONES within the APEX?
  
  Thank you!

  Lorenzo,

  It's actually a little difficult at this stage. I suggest you that to start your learning with the following links:

  http://jastraub.blogspot.com/2008/03/NTLM-HTTP-authentication-and.html
  http://www.Oracle.com/technology/products/database/application_express/PDF/apex_ntlm_authentication_wp.PDF
  NTLM authentication

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  You can reward this answer by marking as being useful or correct ;-)

• Pre filled with user name in the window of windows authentication.

  Hello

  I hope someone can help me!

  I'll put up the Single Sign-On, but do you have a problem, which is a right pain! because of duty capture the screens that need to be the same each time as the users to enter password.

  I am trying to use SSO to treat the identification information to users through a window of Windows authentication, I want windows authentication for prompt as the way it's Setup is using a generic account to log on locally to the machine but then access intranet and applications users will be run as the credentials of domain users that they authenticate with Single Sign On by connecting to the application.

  I got all applications work, but the problem is when the local generic account accessed sharepoint authentication in sharepoint (as its supposed to do), but in this case I don't want to do, so I put the home page for this local account for the access denied page of sharepoint to force authentication of users. so everything what I need to do now is to remove the part where he waits just a password and just having use another area account instead.

  Bit of a strange setup I know but if I can get around this problem the journal, password management and user switch will be a great improvement for our users.

  My question is where the username is pre-filled how to remove it or default so that using another account field becomes active?

  Thank you.

  

  Thank you for your response.

  This problem is better suited in the TechNet forum we have a dedicated team to help you with this question, I suggest you post your query on TechNet forum.

  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

• Name of the dynamic pageFlowScope variable on a page of amx, possible?

  Hi all

  I have a problem that I can't seem to move at the moment. I have java classes that try to update some data, and if it is not successful it returns the ID of the control that contains the error. Then I take this control id and use it to highlight the field in error so that the user knows where it is. Usually, this works very well for any other than to a list view.

  For a grid/listView error control is returned in the form of something like "1.14" of the appeal of java, this is equivalent to the number of the line '1' and the id of the control "14". I can easily strip away the '. ' in java but I need a path in my AMX page to define a variable on the fly for example pageFlowScope #{pageFlowScope. {{} row.rowKey} 14} but I get EL analysis of errors try like this, the error is "ERROR_EL_PARSER_NESTED_EL_NOT_SUPPORTED". Basically, I'm trying to have conditional styles depending on whether E {pageFlowScope.114} is set to 1 or not. I can't imagine a better way to implement this in a listView?

  I can only suggest a medium crude to achieve.

  One way to see dynamic values in EL is to use a hash table and use the dynamic value as the key. I would record a HashMap per input element and then store the error with the line indicator not. You can even create your own implementation of HashMap and hoist the flag when running by overloading the get method.

  [For example #{pageFlowScope.elem14ErrorMap [row.rowKey}]

• Name of the instance (AS2) + variable

  I have 3 symbols: box1, box2 and box3.

  I want them to move when I press the space bar.

  space bar once will first make a move. the second time, the second box to move and so on.

  1 var whichbox:Number = 1;

  2. pressed var: Boolean = false;

  3 onEnterFrame = function () {}

  4 if(whichbox==4) {}

  5 whichbox = 1;

  6.}

  7. if (!) Key.isDown (Key.SPACE) & & pressed == true) {}

  8. hurry = false;

  9.}

  10 if (Key.isDown (Key.SPACE) & & pressed == false) {}

  11 _root.box + whichbox._y += 50;

  12 whichbox += 1;

  13. hurry = true;

  14.}

  15.}

  I guess that the problem is in line 11, right?

  What wrong with that?

  _root. Box + whichbox._y += 50;

  Should be

  _root ["box" + whichbox] ._y

• Captivate 4: name of the project window, something other than the name of the file

  Greetings,

  I use Captivate 4 and have a question about the name of the window to a published project.

  Captivate 3, I could create a project file with any file name (for example, name the file "my_cp_project.cp").

  In preferences-> general-> change the name of the project (from 'my_cp_project.cp' to some clear text I want (for example, 'My Version 3 Captivate project').)

  When I publish the project and test I would launch the HTML published in my browser for display. The browser would make a window with the name of 'clear text' (in this example, the text "My Version 3 Captivate project" was displayed in the upper left corner of the window.

  In Captivate 4 preferences are different. When I create a project file (for example, name the file "my_cp_project.cp") with the same name structure, the behavior is different.

  In the preferences-> project-> Info in the name of the project , I use the clear text I want (for example, 'My Version 3 Captivate project').

  When I publish the project and test it by throwing it in a browser, the browser would make a window for the project, but the name of the window would be "my_cp_project.cp". I don't see any place where I can change this.

  Is there another method to use to control the name of the project window? I looked through the forums and found that you can do this by using a variable. Is there a setting I'm missing?

  Thank you

  TPK

  Doubt you can change the source - this is the code that generates the text that is the problem.

  If your build number is 1596, then you don't have the patch.

  Info on what it fixes here:

  http://blogs.Adobe.com/Captivate/2009/05/captvate_4_patch_update.html

  Don't know where to find via the Adobe site now we have 5.5 - Adobe is not very good at keeping the updates on the old live versions.

  Try here for a direct download - who knows how long it will stay online:

  http://download.Macromedia.com/pub/Captivate/update/captivate_4_updater.zip