Name password and router
I have an E1200 and when I was 2 years ago, I ran the Setup and that he did not write the name of the router or the password. I ensure that the password is probably the admin, but I'm not sure if it's admin is capilized or not. I hate to have to start over in reinstaling the router. I'm afraid I wil do some damage. Can someone help me out here?
Where can I find the name of the router and the password on my hard drive? I appreciate all help. Thank you
The router or admin password is used to access the configuration page based on web or user interface of your router for configuration and update settings or check. The default password for Linksys routers is admin. If you have lost or forgotten your router password, you must reset the router to factory default settings. You can find this useful link .
Ann_18678
Linksys technical support
Tags: Linksys Routers
Similar Questions
-
Get on my wireless network - I'm in the prompt for the user name, password, and domain
I tried to connect to my home wireless network. with most wireless networks, I will ask you for a password and I can enter and connect, but my home network wonder with additional credentials, including username, password and domain. My home network does not work with all other computers that are used in my house. What can I do to connect?
Hello
1. try relative to wireless networking and make sure that you set the level of security to WPA2-Personal, as it is recommended. Follow the steps listed in the link below and check if that helps:http://windows.microsoft.com/en-us/windows7/Setting-up-a-wireless-network
2 disable the software firewall and windows AntiVirus installed on your computer and then try to connect to the wireless network. Make sure that you turn on once connected to the network.
3. you can also try the steps listed in the link below:http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-network-connection-problems (for Windows 7)
4. run the built-in network troubleshooting utility, follow the steps listed in the below link for the same thing: using the utility in Windows 7 Network Troubleshooter:http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I received the following message and it's in my junk e-mail folder, and I don't know if I should respond? Dear account owner
It is Windows Live Hotmail e-mail and we send it to you for your safety. Due to the anonymous registration of accounts that causes congestion at our service, we close some accounts and your account was among those to delete. The purpose of this message is to respond to you to verify that you are the owner of this account and using it again by completing the information below after clicking the button:
* User name:...* Password:...* Date of birth:...* Country or territory:. ......
Warning! The account holder who fails to check access to his account after two weeks of receiving this warning will lose his account permanently.You have received this e-mail because you have subscribed to Windows Live Alerts . Presents an unmonitored email account. This email was sent by , of the Microsoft Corporation, One Microsoft Way, Redmond, WA 98052. © 2011 Microsoft Corporation. All rights reservedIt's a scam. Don't answer and certainly do not provide them with any information they have requested.
-
I just got an email to update my user name and password, date of birth or my acc't will be closed after 2 weeks continuous. Is it legitimate or spam?
It's a scam.
Any real change request ask you to go to the site and sign in to your account.
-
I've had this laptop for 3 years with no problems. One day last week when I tried to connect to my network home as usual, I get a message saying: more information needed, and he asks user name and PW domain name. All other wireless devices work as usual, only my Vista laptop. I never set it to connect to a domain. If I try to manually remove and reconnect to the network I get the same error. How can I remove this domain setting so I can connect to my home network as usual?
All the most popular tips...
PS You may have guessed that I am no computer wiz!
Thank you very much
Hello
Look at the configuration in Control Panel / System.
See here http://www.ezlan.net/Win7/group_name.jpg
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Adobe Flash Player refuses my user name password and/or
I recently changed my password Adobe both my Apple ID and password, but the installation of Adobe Flash Player program does not accept these to update my Flash Player from Adobe. I have a Macbook Pro - OS X Version 10.7.5. My email address is unchanged. Any suggestions? JL
having the same problem. Received the email from Adobe accepting the new password, but I just get the "shaking" when he rejected my attempts to install the new flash player. Very frustrating!
-
In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?
If you define a sync and create a new account to sync or connect to an existing synchronization account then Firefox stores the credentials (name, password and key Sync) in password manager to allow to connect to this account when you start Firefox.
If you remove these entries in password manager then sync will stop working and you will have to set up the synchronization again. -
Just installed the beta version of Firefox mobile on my HTC Desire running latest updates, to Canada on Tulus. Installed correctly, but in the first configuration screen (Preferences) I wonder at the bottom for info sync... What should I enter, nothing I put in works... Need this info to set up syncs not between my HTC and the computer then what is it? Looking forward to this, but can not use without completing this...
Would love to get that will sync with my computer!When first install you Firefox Sync in Firefox, you would have to create a new account. This process involves the definition of a key user name, password and sync. If you haven't yet set up an account, you can then choose a name of user and password key / sync.
For more details, see How can I set up Sync on my computer?. The article refers to a passphrase that will be the same as the key to the synchronization, it has recently been renamed.
-
Wireless router requesting domain username, password and logon
I recently bought a router without wire - WBR - T2 - as my old netgear router has stopped working. I can connect via the ethernet fine connection and access the internet. But on my computer Vista laptop when I try to connect to the wireless network, what I asks me to enter a username, password and domain logon. The old netgear router has not asked for these. Any help if her I need information would be appreciated.
Thank youJonI don't know where you get the application for the user name, etc. Your computer is on a domain? In the meantime, here is general information about the implementation of a wireless network. See if anything here helps you.
To configure the router:
Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:
http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)
This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.
Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.
Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)
Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.
At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.
MS - MVP - Elephant Boy computers - don't panic! -
I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.
OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?
If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.
-
I keep getting asked for password and name to iCloud even if I do not have?
I keep getting asked for password and name to iCloud even if I do not have? any time I start up my laptop?
I guess that you connected to in discussions with your ID - even try
credentials for iCloud. Good luck, Tom
-
Received suspicious email
Just got an email from "Windows Live Hotmail", * address email is removed from the privacy * asking me to answer in my name, password, date of birth and country. ???? "permanent suspension" if I can't do this... links to all the pages from Microsoft including the privacy statement... I will not answer but worry that if it is a scam people. Any thoughts?Hello
Its a SCAM!
In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
(FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
(BJA).
http://www.ic3.gov/complaint/default.aspxNo, Microsoft would not email or call you unsolicited. Or they would know if there were any errors
on your computer. So those are the frauds or scams to get your money or worse to steal your
identity.Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-support==============================================================
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://answers.Microsoft.com/en-us/windowsliveWindows Help and how
http://Windows.Microsoft.com/en-us/Windows/helpHotmail - Forums
http://answers.Microsoft.com/en-us/windowslive/Forum/HotmailHotmail - Solutions and how additional resources
http://Windows.Microsoft.com/en-us/Hotmail/help-centerHotmail - how to - FAQ
http://Windows.Microsoft.com/en-us/Hotmail/Hotmail-how-do-i-FAQWhy my account is temporarily blocked?
http://Windows.Microsoft.com/en-us/Hotmail/account-temporarily-blocked-FAQWhat should I do if my account has been hacked?
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down. The person who sends me emails is also with MSN. Everyone knows this? Thanks for your help.
Thank you for visiting the Microsoft answers community.
The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.
-
I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.
Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).
Most of the suppliers do not let you send if you are not connected through them, or they have special settings. So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.
Steve
-
Password for the drive mapping
Password for the card
1. I have XP Pro SP3 on a computer desktop and XP Home SP3 on a netbook. A printer is on the desktop.
2. I have a local area network using Ethernet between the two computers. According to the 'network connections' opens on both computers, the LAN connects successfully.
3. I've specified three office folders (and their subfolders) and the shared printer, all this without passwords (I don't use password at all in both systems).
4. in the past, I could map files and printer on the netbook without difficulty, but now when I try to map a folder or printer on the netbook, the system wants a user name or password, and I don't know what to say.
5. what has changed, and how can I revert the changes?
AdrianHi Adrien,.
I suggest that you disconnect the card reader and see if it helps. See the following article for more information.
Maybe you are looking for
-
When I started using Thunderbird, created automatically to the Inbox, drafts, sent, and deleted files. Now I have that Inbox and deleted as the currents of air and sent are no longer displayed. They don't seem to be in the folder deleted, no more. Su
-
Problem hardware iPhone 6 +.
Hello I had an iphone 6 + last year, but still by the apple warranty. The problem is answering the phone. When I answered the phone, the caller would hear me, but I couldn't hear what they were saying, however, I had to open the speaker to hear what
-
Can you show Chinese in a button?
I have a machine that is fully developed and works well, but now he must go to China and they want some of the buttons to be in Chinese. Can I send Chinese characters to a button? Thank you Doug
-
magnetic by IncrediMail refuses to start working after a successful installation?
magnetic by IncrediMail refuses to start working after a successful installation? original title: STARTUP FAILURE
-
my Media Player plays the upside down and backward.
How can I fix my windows media player to be read correctly. He plays upside down and backward.