named extended ACL doesn't work, can you help me?

Similar Questions

• Once we have rehabilitated factory that my clicker right does not work can you help me?

  the right of my aspire one laptop, model number kav60 notebook pc does not work after restoring to factory condition.can help you?

  Hello

  After you have reinstalled the operating system, you must download the latest drivers and software updates for it to Acer.

  http://support.Acer.com/us/en/product/default.aspx

  See you soon.

• my touch screen does not work can you tell me why

  I computer.but full-screen sony now my touch screen will not the work.can you help me.

  Hello

  You must check with the support of Sony, their online documentation and drivers, diagnostics and ask
  forums about known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hello. Can you help me get my built in webcam doesn't work on my Advent laptop with windows Vista operating system thanks

  Hello. I have a very nice laptop Advent and would love to get the built in Webcam work. Can you help me please? I have the windows Vista operating system. Thank you jeremy in Great Britain

  PS my grade o level B in computer science from Cambridge arriving 1984 useful! Thank you

  Hi Jeremy,.

  1. what happens when you try to access the webcam?

  2. have you updated the software and drivers for the webcam?

  You can check if the webcam is detected in Device Manager and also try to update the drivers.

  a.Click Start and type device manager in start search and press ENTER.

  b. in Device Manager check if the Webcam is listed.

  c. right click on the webcam and try to update the drivers.

  For more information, you can consult the following article:

  Updated a hardware driver that is not working properly

  You can also see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer. You can also ask advent and are looking for the same thing.

  Support of advent

  Hope this information is useful.

• my computer does not download an update of Microsoft works 9 KB2092914 (definition 1.89.660.0) since last month. Tried everything. Will not download. Can you help me?

  my computer does not download an update of Microsoft works 9 KB2092914 (definition 1.89.660.0) since last month.   Tried everything.  Will not download.  Can you help me?

  Gray

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Hi rogerusa,

  1. you are running Windows 7 on the computer?

  The description of your problem, we understand that you try to install the game and it does not load.

  Check if you can install the game in clean boot or by turning off all non-Microsoft programs. To do this, follow these steps.
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. right-click on the file to install game and click Run as administrator. Install the game and check the result.
  d. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Yes, thanks it works!

• I've updated my LR to CC and LR's work stoppage in my edition. Can you help me?

  I've updated my LR to CC and LR's work stoppage in my edition. Can you help me?

  • Please, go to the Windows, where Device Manager, expand display adapters.
  • Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.
  • Lightroom farm and go back to Device Manager and activate the graphic card.
  • Open Lightroom and then work in Lightroom and check if it works very well.

• Do a right click stick does not work in the editor of the blog of our Web site, can you help me?

  We use websiteforge.com to host our Web site and we cannot use the right click to paste the content in our blog editor. They say it's a problem with Firefox. Can you help me? Thank you.

  Try this extension:

  • RightToClick: https://addons.mozilla.org/firefox/addon/righttoclick/

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• This is a new version of TB I installed on a new PC. None of the contacts from my old version or old PC appear in this version on this PC. Can you help me?

  I had a windows XP PC, and he died. I've yet to try recover data from the hard drive. I bought a new Summit of desktop running windows 8.1. I installed the latest version of Thunderbird. None of the contacts or the data from my old system is coming in the new version, that I work with. Am I just something wrong or is not in the right place. Can you help and advise?

  Thank you

  Lucien Dean

  Thunderbird stores its data on your local drive. You said it's dead. If your data are dead with him.

• Can you help to solve my Firefox? The screen is black.

  When I try to open Firefox, it opens just a solid black screen. I tried to uninstall and then reinstall. Reset. So far, nothing works. Google chrome and internet explore are fine but Firefox a bad shot. Can you help me please?

  Posted by phillip in other threads of support
  Hello, other users with this problem all had a card intel integrated graphics hd with a former current driver. in case this applies to you, here would be a link to update the driver, which in turn, should also address the problem of firefox black.

  Intel HD 2000/3000:
  32-bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23763
  64 bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764

  Intel HD 4000:
  32-bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24328
  64 bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329

• I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me

  I think that last week, I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me - in more detailed - when I try to download a file and save it to my pc it remains on 99%, write the time unknown and not donwload, that is even if I try to open and file - means 'open' clieck not records. I try with different brouzer and quote different and everythink work very well. Problem is only on firefox. I try and that "in the address bar, type about: config and press ENTER." The subject: config "This might void your warranty!" warning page may appear.
  Click on I'll be careful, I promise!, to continue to the about: config page. A list of parameters must appear
  Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the preference "browser.download.scanWhenDone".
  Double-click this preference to set the value to false. "
  But still a problem.

  It's the recent9 b 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. Type of topic: config location bar (address) and you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime. If an empty value does not work then put in https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%

  For not not reading the useful comments are bug / spam.
  Bug 1057764 - Download Manager regression in the update of FF32 beta 9

• OpenPGP error; Encryption/signing failed; Send an unencrypted message? I get this after the upgrade to the latest version of last night. Can you help me?

  Last night, I've upgraded to the new version of Thunderbird 31. When I try to send a signed message, I get the error written in the subject line and my message arrives without the electronic signature.
  Can you help me with this problem that I didn't have before the upgrade?
  Thank you
  Cecilia

  I can not even sign my emails.

  So do you mean that you try just to send a signed message, not so much, encrypted and signed?

  You are prompted to enter the password for your private key when sending a signed message. You get the password prompt at all?

  What is your version of Enigmail?

  The version available on AMO is still 1.6, but the latest version of Enigmail is 1.7, still waiting for review on AMO. Version 1.6 does not work with TB 31, so if you have not 1.7 yet, you can try this.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/Enigmail/versions/