Names of employees AND securities in the reports

Similar Questions

• Hello my name is Geronimo and canselar want the contract that this of time 14 days period. to recover an amount to 60.34 euros. What do do?

  Hello my name is Geronimo and canselar want the contract that this of time 14 days period. to recover an amount to 60.34 euros. What do do?

  Cancel your membership Adobe Creative Cloud

• integrate image and text in the report

  I'm doing a label with a logo at the top left, a chart on the side right (an arrow indicating the direction of flow)

  and the text in the body of the tag, so far without success. I tried to use the generation of report vi s to achieve this, but it seems that just the 'standard' reporting rather than on a word one (no Office product on the computer, has no... Works, yech!) limited considerably, although I do not know how the do with the ability of Word template, although I suspect that would make life much easier. I really don't understand what can do the "standard" report When I set the alignment of the Image to add to the report, there is no effect on the placement of my graphics. In addition, it is an addition, which means that I find myself with the image on a label, the text on the other. I want to do is have them both on the same label, the Logo above and the arrow to the right of the text.

  I tried a lot of things, including using the generation of reports "Append façade image" and make a cluster that has been written to fill all of the panel before visible, but it was printed distorted and small, similarly Append control image.

  The printer is a usb Zebra TLP3842

  LV_Pro,

  As FAS so I understand it, the alignment entries apply only to HTML format, so they do not affect the Standard reports.

  Try to put your logo in the header of the standard report.  Then on your front, create a tab control, where you place your text box and graph of arrow in the direction you want to print on the page.  Make the background of the transparent tab control and add the image of the tab control to the report.  I think that it will be justified to the left little matter what you prefer, so play with the size and spacing of everything until it comes out looking how you want.

• rejecting the name of user and password in the configuration of the Regional on Pre service

  I have a new meadow and when I go to set up the device with my Exchange provider, I get a message saying that the user name and password is not correct when I click SignIn.  I have confirmed all the settings and typed the password several times.  Same information identification and parameters of working on several other devices (other Palm device, computer laptop, etc.), but not on this unit.  I called my Exchange hosting provider and they said that they got a few other calls from people with the same problem with the Pre and were not able to make it work.

  Is there something specific in the user name and password that the pre is looking for (different from any other device that I use that works very well)?

  Thank you.

  The exact message is: error your user name or password is not correct.

  (I checked so doule that I don't have not misspelled the name of user or password, this same info works on other devices, and my host Exchange could not get another pre to connect also)

  Message relates to: Pre (Sprint)

  Message edited by DCS2421 on 06/06/2009 17:47

  Finally managed to do work.  I worked with someone at the home Exchange and found a permutation of user name that worked.  Something like this: Domain.Username (username but different name than what works with all other customer/devices that we/they used - weird).

• Former employees and candidates in the newly created groups

  HI :-)
  
  I created a group of learners and added an "XYZ" Organization as a component assignment.
  If I see the members of the group learning, I could see active, former employees and applicants of org "XYZ" in the list.
  
  Why former employees and candidates added as members of the Group?
  
  What is a planned feature or a bug?
  
  Thanks in advance :)
  
  
  Thank you
  Versa.

  Hey Versa,.

  That was never part of the organization that you add to a group of learning will also be part of the group learning.

  Concerning
  Anders

• How to get all the names of files and extensions to the project Bin

  Is that someone familiar with the question below:

  How do I get the display of file name and file extension in the field of "Media Browser.

  I was working on a plugin, which should detect the files imported into the active project of first.

  I know that first store imported files, while only save a link to the actual path of the clip.

  If I'm not planning to export xml, how can I get these as info?

  HTML5-based panels can get this information, but it is not available via a C++ API (or Objective-C). Write directly to me, and I can give you more information; b b b at adobe dot com.

• Can no longer open a project - and readers of the report accident there?

  Hello

  I worked on a project for a few months and just completed phase yesterday, has sent again and produced a bunch of DVD. Now, I can no longer open the project. It crashes every time, like auto save copies and save copies. I have to go back to a very old copy that works - they work if I go far enough - and do a lot of restructuring.

  Y at - it someone who can read a report for you to try to determine the problem?

  Thanks for your help.

  Kind regards

  Jessica Vecchione

  PS. Happy New Year!

  Yes, it happened with the film. Most of the cameras allowed to 'see' the film advance, if they released the limp, as the rewind crank would turn too. I knew better, but makes a shot at Williamsburg, Virginia, and one body was not moving. I have checked no - hurry, or too little coffee early in the AM? Fortunately, I was shooting with 3 Nikon, so was the film of two of the three for the start (missed some of the WA establishing shots), and when it was time to recharge, I checked the body #1 - Oops! Who corrects and got the images (returned on my own for a few of the shots WA) and learned a lesson, that I thought I knew - independently verify the rewind crank.

  Hunt

• PDF and print in the reports control.

  Dear all,
  
  I want to put a particular format for all reports in PDF format and print control options as desire to place the logo of the client in the header and page number and date of fotter, how can I achieve this, is it possible we can define overall it coz on each report is very time-consuming.
  
  Kind regards
  
  Norman John

  You need Firebug... to find out how your dashboard!

  Check these 2 blogs and play...
  http://oraclebizint.WordPress.com/2008/01/03/Oracle-BI-EE-101332-customizing-download-links/
  http://oraclebizint.WordPress.com/2007/10/26/Oracle-BI-EE-101332-styles-and-skins-Firebug-to-your-rescue/

  I hope I helped...

  ///////////////////////////////////////
  http://greekoraclebi.blogspot.com/
  ///////////////////////////////////////

  Close the question... and add a new thread...
  Give if you wish the relevant points...

• Error on desktop box referred to in the name of user and password to the email address

  The following error box appears on my screen of office several times a day, but I still have access to my e-mail and internet programs.

  -------------------------------------------------------Error                                                                  X

  Username and password do not match. You provided ___.com. Please enter your full email address (including the @domain.com).

  Ok

  ---------------------------------------------------

  I deleted the real email address, but it's the only one I use regularly with gmail. What can I do with the area of the screen is OK, and it disappears. Any ideas on what this refers?

  Thank you!

  It seems to me that gmail is periodically renew or refresh your login (maybe after a certain idle period or delay or other) and the parameters it receives do not correspond to the he filed on the record, so that you get the error message - but because you are already connected it is not to connect you (which in fact is meaningless for me because that defeats the whole purpose).  I'm pretty sure it's a matter of gmail (I assume that you use your browser to your email and not an e-mail program - corect me if I am wrong).

  I recommend transfer you your question in the forum gmail: http://www.google.com/support/forum/p/gmail/label?lid=613f70d9ff743c86&hl=en where experts in gmail and other gmail users should be able to help you with this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• change the properties of the report axis (together begin and end)

  Hey everybody,

  I am a beginner with DIAdem reports and close to despair that I have yet found any solution.

  I wrote a script, which produces reports of various measures with 9 pages (3 2D-slots each, a total of 27 lots).

  Now, I want to put the beginning and the end of the x-axis of certain specific parcels.

  First question: tiara offers something similar to an Object Explorer (for easy access to the names of the objects drawn in a report)?

  I created two GlobalDims called x_time_begin and x_time_end to set these properties, but I don't know how to access these variables in the report (tried @... @ and @... @ the 'Axis settings' tab).

  These variables change for each measure, so each report has a different set.

  The presentation of the State is responsible from a set of. TDMS files and is not altered in the script.

  How can I find the name of a specific plot in the report can access?

  Is it possible to define the range of the x-axis in a variable at all?

  Best regards

  Nils

  Hi Nils,

  It is possible to set the x-axis of begging and positions in the scripts end (see text below).  When you create a report object in the script you can name it anything you want to access later. Otherwise, I think that the default name is the name of the object, of the number (for example the 2D first table is called "2DTable1")

  Dim oMy2DAxisSystem, oMyXScaling
  
  Report.NewLayout
  
  Set oMy2DAxisSystem = Report.ActiveSheet.Objects.Add (eReportObject2DAxisSystem, "My2DAxisSystem")
  
  Set oMyXScaling = oMy2DAxisSystem.XAxis.Scaling
  
  oMyXScaling.AutoScalingType = eAxisAutoScalingManual
  
  oMyXScaling.Begin = 0.01
  
  oMyXScaling.End = 100

  Hope that helps,

  Sadie

• SQLDev4 - sdcli - space in the name of the report (Linux/Mac)

  Version SQL Developer - 4.0.0.12.27

  Under linux/Mac, platforms, SQL Developer 4, when you use (sdcli) command-line interface to generate html from a 'user defined Report", if the report path has space, then it fails. Its due to the use of $* sqldeveloper/bin/sqldeveloper file used to launch the IDE. If the parameter is passed to the place using the "$@", then the report name is correctly passed to the IDE and it generates the report successfully.

  Maybe Developer SQL Developer may want to fix this bug.

  $ grep LaunchIDE sqldeveloper

  LaunchIDE $*.

  $ bash sdcli reports generate - report "Names/latch Vishal/statistics names" db - files 11203_RHEL6-/tmp/vishal.html

  Oracle SQL Developer

  Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved

  July 25, 2013 16:34:58 javax.ide.extension.spi.DefaultElementContext resolveResource

  GRAVE: jar:/file:/Applications/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.application.jar!/META-INF/extension.xml:16: resource not found: ' ${SCRATCH_COMMAND_ICON} ".

  Invalid reports command:-FILE

  $ grep LaunchIDE sqldeveloper

  LaunchIDE "$@".

  $ bash sdcli reports generate - report "Names/latch Vishal/statistics names" db - files 11203_RHEL6-/tmp/vishal.html

  Oracle SQL Developer

  Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.

  July 25, 2013 16:35:24 javax.ide.extension.spi.DefaultElementContext resolveResource

  GRAVE: jar:/file:/Applications/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.application.jar!/META-INF/extension.xml:16: resource not found: ' ${SCRATCH_COMMAND_ICON} ".

  Success!

  Hello.

  connected n fixed a bug 17221719.

  Thank you

  Barry

• file restoration and file under the icons of file names

  I searched, found and lost the answer to this question. How to restore the names of folders and files under the icon in windows Explorer. They are all displayed on save. However, when I open a file or a folder that they are not shown and I have to go through many twists and turns to find the file I'm looking for.

  Open a windows Explorer... at the top menu bar click view, uncheck "Hide file names".

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• Utility LCM - how to provide the name of user and password (to avoid prompting)

  Version - hyperion 11.1.1.3.24
  Objective - is to RUN the utility of LCM & schedule it later.
  Create a Batch file to run the utility of LCM. Calling utility LCM & referring location of XM. Batch file is created as follows.
  
  --------------------------------------------------------------------------------
  
  E:\Hyperion\common\utilities\LCM\9.5.0.0\bin\Utility.bat E:\Temp\TestExport.xml
  
  
  --------------------------------------------------------------------------------
  When tried to run, it requires a username and password. I'm not very versed in working with scripts. How to provide ID and password, so that it runs automatically.

  You can provide a name of user and password in the migration xml file.
  If you run an export and save on migration to XML, open xml code under the heading ConnectionInfo that you will see username and password, you can enter the details in the xml file

  for example
  http://2.BP.blogspot.com/__2AaArK5lW8/SJSBsGDDQuI/AAAAAAAAAOU/szcTOhfoaxs/S1600-h/14.PNG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot run the report

  DB and dev 10grel2, xp sp2
  Hi all
  IAM trying to run the report in the form with a button generator
  I used this command to start my server: Server rwserver = "MyServer" auto = Yes and it works well.
  
  I created a report object (report5) on the form that contains the button to run the report.
  When I click on the browser reports node to create the report object, I assigned 'myrep' as the file name of the report, not based on a block of data and then created the report of the scott schema dnames.
  
  then closed the Report Builder without saving it in another format.
  
  then I wrote this code in the when button pressed the shutter:

   
  
  declare 
       rp report_object ;
       v varchar2(90) ; 
  begin 
       rp := find_report_object('report5') ; 
       v := run_report_object(rp) ; 
  end ; 

  -nothing wrong with the code, then I ran the form, you press the button to find out:
  FRM-41214 cannot run the report.
  When I looked at the online help, it tells me nothing but
  Cause: The report server could not run the specified report.
  Action: Check the report server and make sure it is running.
  and I checked and it runs and upward.
  What should I do?
  Thanks in advance

  Check my code and try this code in you touch. I write it given your situation and information provided. You can paste directly into your trigger button.

  DECLARE
  
       v_repid REPORT_OBJECT;
       v_rep VARCHAR2(100);
       v_rep_status VARCHAR2(100);
       v_param VARCHAR2(200) := NULL;
       v_valor VARCHAR2(200);
       v_url VARCHAR2(2000);
       v_repserver varchar2(20) := 'myserver'; -- YOUR REPORT SERVER NAME
  
       v_report varchar2(100) := 'E:\myrep.jsp'; -- YOUR REPORT PATH AND NAME
       /* IF .JSP IS NOT WORK CONVERT IT TO .REP AND TRY */
       v_PARAMETRO varchar2(100) := '';
  
  BEGIN
  
       v_repid := FIND_REPORT_OBJECT('report5'); -- report is an element from object navigator report
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_FILENAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, SYNCHRONOUS);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, cache);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'pdf' );
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESNAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, v_repserver);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_OTHER, 'paramform=no '||v_PARAMETRO);
       v_rep := RUN_REPORT_OBJECT(v_repid);
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       WHILE v_rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       END LOOP;
       IF v_rep_status = 'FINISHED' THEN
       message(v_rep);
       message(v_rep);
       WEB.SHOW_DOCUMENT(v_url||'/reports/rwservlet/getjobid'||
       SUBSTR(v_rep, INSTR(v_rep,'_', -1)+1)||'?'||'server='||v_repserver, '_blank');
       END IF;
  
  END;
  

  So let me know what you get...

  Ed: I've updated my blog link. You can check the first time, if necessary.

  Published by: HamidHelal on January 21, 2013 12:43 AM