names of streets on the paths / between closed streets

Similar Questions

• How to display the name of file or the path of the photos on my screensaver when the value for 'My images' using Vista?

  I simply marked the box in 'settings' of the screen saver under Windows XP, but Vista does not display this option!

  When an image appears on my screen saver, I want to find it among the thousands of photos by reading the name of the file or the path at the top of the screen.

  Hello

  This screensaver Vista version doesn't have this option.

  The feature is now part of the Windows Live Photo Gallery.  You can go to http://get.live.com to download the program.  .

• Is it possible to reset the path between the location it is source clip life so that when repositioning back it goes back to the item in a specific location and a clip?

  We had to redo our bins stage because not all clips imported via the media browser, and now that we brought manually with hand cursor via the browser of media elements in the sequence link clips in strange tubs that are not records bin stage.  We want to the difficulty of these paths if possible.

  '

  Select the item in the timeline panel.

  Once selected, right-click (Ctrl-click) on the clip and the drop-down list that appears, choose "reveal in project.

  The source of the item in the timeline is now highlighted in the project Panel, and then you can move this clip in the project to the bin that you want to put in it.

  MtD

• Unable to connect the path between two components. Blue MultiSIM.

  Hello

  With the help of Multisim blue.

  On the use of ' follow me ' follow-up. When I select a capacitor element then go to connect to U4 as shown in the picture. I can't quite track to connect to U4, as shown in the picture. If I have 1 Select the pad on U4 and move the cursor and no track is visible. It's the way of power supply VCC (net).

  What have I done wrong?

  
  

• Hierarchical Oracle query help needed - path between the crux of two brothers and sisters

  I want to find the path between two nodes of oracle hierarchical Table.
  
  Consider the following case-
  NodeId - ParentId
  =============
  1 > > > > > > 0
  2 > > > > > > 1
  3 > > > > > > 2
  4 > > > > > > 3
  5 > > > > > > 0
  6 > > > > > > 5
  Here I want to query the database table that if there is a path between nodes 3 and 5?
  The previous query you provided work upwards to the root node.
  
  Here is my expected result, 3-> 2-> 1-> 0-> 5
  
  Yet once if I have a query in the table to get the path between 1 and 3, I want to get out of the way - next
  1-> 2-> 3
  
  Therefore, the query works in both cases. Where ADI root can act as an intermediate or no node.
  
  Can you please guide me how I can get it?
  
  Thank you.

  Hello

  user13276471 wrote:
  I want to find the path between two nodes of oracle hierarchical Table.

  Consider the following case-
  NodeId - ParentId
  =============
  1 >>>>>> 0
  2 >>>>>> 1
  3 >>>>>> 2
  4 >>>>>> 3
  5 >>>>>> 0
  6 >>>>>> 5
  Here I want to query the database table that if there is a path between nodes 3 and 5?
  The previous query

  What application is this? If you're referering to another thread, then post a link, such as {message identifier: = 10769125}

  you provided work upwards to the root node.

  Here is my expected result, 3--> 2--> 1--> 0--> 5

  Yet once if I have a query in the table to get the path between 1 and 3, I want to get out of the way - next
  1--> 2--> 3

  Therefore, the query works in both cases. Where ADI root can act as an intermediate or no node.

  Can you please guide me how I can get it?

  I think you want something like this:

  WITH     bottom_up_from_src    AS
  (
       SELECT     nodeid
       ,     parentid
       FROM     table_x
       START WITH     nodeid      = :src_nodeid
       CONNECT BY     nodeid   = PRIOR parentid
  )
  ,     bottom_up_from_dst     AS
  (
       SELECT     *
       FROM     bottom_up_from_src
      UNION ALL
       SELECT     parentid     AS nodeid
       ,     nodeid          AS parentid
       FROM     table_x
       WHERE     nodeid     NOT IN (
                                        SELECT  nodeid
                                 FROM    bottom_up_from_src
                                    )
       START WITH     nodeid        = :dst_nodeid
       CONNECT BY     nodeid        = PRIOR parentid
  )
  SELECT      :src_nodeid || SYS_CONNECT_BY_PATH (parentid, '-->')     AS display_path
  FROM       bottom_up_from_dst
  WHERE       parentid     = :dst_nodeid
  START WITH  nodeid     = :src_nodeid
  CONNECT BY  nodeid     = PRIOR parentid
  ;
  

  This will show how you can get it from: src_nodeid at dst_nodeid, moving to the top or to the bottom of a hierarchy at a time step. This will work regardless of the fact that
  

  
  
  • : src_nodeid is the ancestor of the: dst_nodeid, or
    
  • : src_nodeid is a descendant of: dst_nodeid, or
    
  • both: src_nodeid and: dst_nodeid are the descendants of another node (e.g. 0).
    

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0). It is always important, but particularly so with CONNECT BY queries, because each version since Oracle 7 had significant improvements in this area.
  See the FAQ forum {message identifier: = 9360002}

• How an anchor to use right on the path and not on the point tool? I have

  I'm using version CS 5. I tried, but gives me an error. Is it available on a newer version?

  kisanbhat,

  There are three tools of anchor Point.

  Add the anchor Point should work (only) on the path between the existing Anchor Points. Removal of Point of anchorage and Point Director conversion should work (only) on exoisting Anchor Points.

  Otherwise, something is really wrong.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• create new folder, but the path does not exist.  That's why I need to create!

  I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits.  In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent.  But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist.  Which may be the reason I'm trying to create the new folder.  Everything seems to be able to do is to slect the existing folders.  Where is the creation of a new part of catalogue record?

  If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.

• All paths between 2 nodes

  Hello
  
  Can you get it someone please let me know how can I achieve this?
  
  I want to know all the paths between A Source node and the node of Destination B.
  
  I donot want the shortest way but all paths between the 2 nodes.
  
  Also I donot have no weight/cost by any path. (The graph is a directed graph)
  
  Kind regards
  Pantxo

  Hello

  Maybe this:

  Scott@my11g SQL>l
    1  with links(n1,n2) as (
    2  select 'A','B' from dual
    3  union all select 'A','C' from dual
    4  union all select 'B','C' from dual
    5  union all select 'B','D' from dual
    6  union all select 'D','G' from dual
    7  union all select 'C','G' from dual
    8  union all select 'D','I' from dual
    9  union all select 'C','E' from dual
   10  union all select 'E','F' from dual
   11  union all select 'F','G' from dual
   12  union all select 'F','H' from dual
   13  )
   14  select pth
   15  from (
   16  select connect_by_root(n1) || sys_connect_by_path(n2,'>') pth ,n2
   17  from links
   18  start with n1='A'
   19  connect by nocycle prior n2=n1
   20  )
   21* where n2='G'
  Scott@my11g SQL>/
  
  PTH
  ----------------------------------------
  A>B>C>E>F>G
  A>B>C>G
  A>B>D>G
  A>C>E>F>G
  A>C>G
  

• It is possible to select a segment of a path between two points outside their clipping mask?

  I have a way with 3D rotation effect tends in a clipping mask. In the Preview mode (Ctrl + Y), most of the road is not the clipping mask, but most of the visible inside the mask in normal view because of the 3D effect turns. I want to select and remove a segment of the path between two points outside the clipping path, but Illustrator does not select the components of access outside their clipping mask path.

  Anyway is to do without for as much free mask?

  ALWAYS indicate the version you are using. Regulars here using one of the six different versions of Illustrator. Assuming that the current version:

  White pointer: marquee select around a portion of the original route which is located in the clipping mask.

  OR

  Black hand: select the object. Make a right click the object. Select isolate selected in the popup clipping mask.

  JET

• Movement of masking of the Code between environments

  I move code between home and the office, and one of the annoying problems I'm having with Dreamweaver CS3 is that when I reduce the code on 1 environment, everything is great, but once I move this code to another environment, the code of the opening page gives a long message basically "we don't know where your drop-off points are more and will just expand everything." , in essence, lose my points of fall.

  Is there a way I can include some meta data are necessary to keep the drop points between the moving code from the environments?

  Actaully, I finally found the data.  An installation by default on Windows 7, it is located in the:

  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver9\Configuration\CodeCollapse\Cache

  It's XML stored as a .mcc (the Macromedia Code masking)?  I just save this info and move it.

  NOTE: the part of the XML file uses a full path to the files with codes of collapse in them, so you must make sure that the path between the environments are exactly the same, or it won't work.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• Find the path name

  Hi all

  I'm new to scripting in photoshop and I'm learning. I want to write a code for "find the particular path with an alert box if its is available in the file or not" I was challenging and confusing. I used the "else" method, but I could not do things.

  #target photoshop

  var doc = app.activeDocument;

  If (app.activeDocumen.pathItems.length > 0) {}

  app.activeDocument.pathItems [0] .name = "path 1".

  } else {}

  Alert ("' there is no path name: path 1", title, errorIcon ")

  }

  also tried this one

  #target photoshop

  var doc = app.activeDocument;

  If (doc.pathItems.length > 0) {}

  app.activeDocument.pathItems.getByName ('path 1') .select ();

  } else {}

  Alert ("' there is no path name: path 1", title, errorIcon ")

  }

  pls help me!

  A single if statement would not work for this task. Because pathItem.getByName will be thorw a mistake if this pathItem does not exist, you cannot use getByName in an if statement. I know that some might think try/catch don't serve and this is a way to test for a path by name without the try/catch.

  if( app.documents.length>0 && app.activeDocument.pathItems.length>0 ){
      for(var pathItemIndex = 0;pathItemIndex< app.activeDocument.pathItems.length; pathItemIndex++){
          if(app.activeDocument.pathItems[pathItemIndex].name == 'Path 1' ) {
              alert('Path found');
          }
      }
      alert('This document does not have a path with that name');
  }else{
      alert('Needs a document with pathItems');
  }
  

  I used the try/catch, because I think it's faster. With a try statement you must have taken to handle the error or error code blocks to run regardles. You can use two catches and finally if necessary.

  The e part of catch (e) is the error object. If you want more details about the error you could do something like that.

  try{
      var myDoc = app.activeDocument;
      var myPath = myDoc.pathItems.getByName("Path 1");
      alert('The pathItem: '+myPath.name+' was found');
  }catch(errorObject){
      alert(errorObject.message+': '+errorObject.line);
  }
  

  In this case the message would be the same if there is no document or pathItem with that name. But the line number is different. And most of the time the error message is more useful than "no element of such".

  I hope that explains why the difference between the so or use try/catch to do something like that. Let me know if you have any other questions.

• What is the difference between the cookies keep until I close firefox and the history of cookie empty closing firefox?

  In the settings of Firefox 33.0 (I use Ubuntu 14.04, but the functionality is the same for Windows 7) there are two ways to delete cookies when firefox closes. Or at least, there seems to be.

  Is first the cookies keep until firefox is closed

  Second is to check the box for clear history of firefox closing and in the settings check cookies.

  What is the difference between these two options?

  I usually have two configuration but I noticed that a connection was not save for td canada trust EasyWeb, even though I have an exception set for it. Now I unchecked to remove cookies by disabling the history on close and connection records correctly.

  This connection allows to save 7 cookes under easyweb.td.com and 10 cookies under td.com and I have exceptions defined for both. If I clear the history when closing and include cookies, half of the td.com cookies disappeared when I close firefox and re - open. The same is true if I'm not the exception.

  So currently I can't find a way to keep all cookies if I clear the cookie history when firefox closes. What is the difference with this option?

  When you change the default cookie 'to life' of "keep until: they expire" to "keep until the: I close Firefox", Firefox changes all persistent cookies that sites set session cookies. To allow a site to place a persistent cookie, you need to make an exception (site permission).

  When you turn on the story to stop compensation and include cookies, running a completely separate process that doesn't doesn't pay attention to the duration of cookie or exceptions (permissions site). There just nukes all.

  Note that some cookies could survive if they are encoded in the history file of your session of compensation at the stop, a Firefox uses to restore your tabs and windows from last session. I have not tested.

• What is the path name to the file of contacts and the personal address book file?

  I can't find this path name. When I had to reinstall Thunderbird, I couldn't restore the contacts list.

  Menu help > troubleshooting information, then click on the button display the profile folder. It's the path, which shows in the Explorer.

• Use regular expressions to extract .llb file from the path name

  I'm trying to be smart (always a dangerous thing) and use a regular expression to extract the name of a library to a filepath converted to a string.   While I appreciate there are other ways to do this, regex seems to be a very powerful way of neat, I would be able to operate.

  IE, if I have a string of type, C:\applications\versions\library.llb\toplevel.vi, I want to be able to extract the library.llb of the string, because it will be of variable length, may include the numbers & spaces and may be located in a file of variable depth hierarchy.   In other words, I want to extract the part of the string between the last-which ends with .llb

  The best I managed so far is \\+.*llb who all returned less the drive letter and the toplevel.vi

  Can someone help me to achieve this goal, or I'm better by using an alternative method (for example filepath string in array, search for .llb)

  Thank you

  Matt

  Hi Matt,

  attached you will find two other options.

  Mike