It is possible to select a segment of a path between two points outside their clipping mask?

Similar Questions

• Hanging tool select disabled but time always snaps between sampling Points

  Hello

  In the Waveform Editor, when I Zoom in directly on the waveform, the points become visible. I have 3 Q: -.

  1. What are these points
  2. They can be changed
  3. How can I select (with the Selection tool) anywhere on the waveform?
     1. I deselected waspish and yet I am with zoom basically I can only place the time tool (TST) between the points visible, i.e. hearing snaps TST so I can not place exactly there where I want

  Thank you!

  The points show the individual samples in your digital recording.

  Jump to your last question, you cannot place the time between samples picker because samples are smaller individual representations of the original audio.  the lines between the samples are an artificial creation, making a waveform of samples.   There is an excellent video showing how digital audio works - I recommend highly a cup of coffee and a viewing: D/A and A/D | Digital Show and Tell (Monty Montgomery @ xiph.org) - YouTube

  Spacing of samples is determined by the sample selected speed which, in turn, is controlled by the clock system (Word clock).

  As for the editing... not really.  Older versions of hearing used to allow you to enter a sample and move it upwards or downwards, but the results could be unpredictable - under Nyquist theory there is only one waveform (i.e. one correct) which corresponds to the sequence of individual samples.   Changing a single sample (or even two or three) can force the system that analyzes samples and draws the analog waveform by doing a few calculations confusing, incorrect.   If you watch the video above and "read between the lines" you can see why that would be.

• Is it possible for a line chart display curved lines between the points?

  We have a demand interesting to build a line chart in OBIEE, where the points on the graph are connected by curved lines instead of the normal straights. The best way to describe it would be "serpentine". I saw this in a Cognos report, but I do not know if OBIEE for this. Maybe a setting in line.pcxml? Any ideas?

  Currently, we do not provide the organizational chart. Both options, you have to connect the dots in a line chart are either via a straight line or a curve of the step. A curved line would essentially be a form of a spline, with suitable smoothing algorithms.

  Rgds,
  Afonso
  BI product management

• Direct Selection tool removes the complete path

  Need to delete part of a path, but when I select the points I want to delete (or a line between two points) with the direct selection (not path selection) and click on 'remove' the full path of the deletions!

  This seems to be a new default value of CS5 on my copy.

  Any thoughts?

  Try it with a selected layer, otherwise it will remove the entire path

• I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3.

  I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  tupensi wrote:

  use Microsoft Excel for Mac 2011 Version 14.5.3. Thank you!

  Then you should post on the Microsoft Mac forums where to hang out the gurus of the Office, as is the Microsoft product, with that you are having problems:

  http://answers.Microsoft.com/en-us/Mac

• In the Numbers worksheet - is - it possible to select or define a are to print?

  In the Numbers worksheet - is - it possible to select or define an area to print?

  Not like in Excel.  3 numbers is not nearly as print oriented like other spreadsheet applications (it is more suited to sharing via the cloud or on a Tablet seems old reports). Numbers is also designed for you to work in stand-alone tables rather than on a large tract of cells in Excel. You can organize your document so the part that you need to print is in a particular table.  Move this table on a separate sheet and print this sheet only.  To move a table, select it and click on the 'bulls eye' top left, command + x to cut, navigate to a new sheet that you have configured, command-v to paste.

  SG

• Is it possible to selectively place pages?

  I am developing a website in Muse, but in stages, and I'm ready to roll on the front pages. I wishes to continue development work on the remaining pages within the same provision of Muse, but don't want to ride unfinished pages that currently exist. I can control the selections of nav, and I realize that I can roll an orphaned page not connected to others on the site (a little dangerous in this case). But I'd really rather not spread a unfinished page just to unwind a finished page.

  Is it possible to selectively place a set of pages? I don't like the idea of splitting the source code line and ending up with two files Muse - one with new pages and one without.

  I could possibly use a versioning system, but the Muse does not seem to support itself, so I have to use such a system external to Muse.

  All the advice of more experienced users?

  Thank you.

  You can set the publication ban page, which has not yet been finalized.

  

• It is possible to select multiple non-contiguous items on a page?

  It is possible to select multiple non-contiguous items on a page? Lets say I want to apply a style to 5 different elements on a page, and they are scattered all over the page. Can I somehow select all 5 and apply the style to them with a single click?

  If you speak a different, non-contiguous pieces of text in the same text box, InDesign doesn't have this capability.

• I have a folder with 140 tif files I want to convert to PDF. Is it possible to select the folder and convert all files or what I need to do each file individually?

  I have a folder containing tiff 140 files I want to convert to PDF. Is it possible to select the folder and convert all files or do I have to convert each individually?

  Hi MBASparky,

  It is possible to convert all the TIFF files to PDF in a go with Actions in Acrobat Pro ms.

  You can also perform this service Pack PDF help.

  Go to https://cloud.acrobat.com/convertpdf

  Sign in with your credentials

  Click on select files to convert to PDF

  Click on choose the files on my computer

  Of the open a file dialog box, navigate to the folder where you have all the TIFF files and use CTRL + A to select all files.

  I would like to know if it works.

  Thank you

  Abhishek

• Is it possible to establish the selection square between two Guides...?

  Hello world

  Is it possible to establish the square selection between two Guides. Guides are up & down (or) left and right.

  The rectangle has been fixed ratio 200 X 200. Thanks in advance.

  

  -yajiv

  This requires Photoshop CS5 or better...

  #target photoshop
  app.bringToFront();
  main();
  function main(){
  if(app.version.match(/\d+/) < 12) return;
  if(!documents.length) return;
  var doc = activeDocument;
  var guides = doc.guides;
  if(guides.length != 2) return;
  if(guides[0].direction != guides[1].direction) return;
  var startRulerUnits = preferences.rulerUnits;
  preferences.rulerUnits = Units.PIXELS;
  var SB = new Array();
  if(guides[0].direction == Direction.HORIZONTAL && guides[1].direction == Direction.HORIZONTAL){
  var vertDistance = doc.guides[1].coordinate.value - doc.guides[0].coordinate.value;
  SB[0] = (doc.width.value - vertDistance)/2;
  SB[1] = doc.guides[0].coordinate.value;
  SB[2] =  ((doc.width.value - vertDistance)/2)+vertDistance;
  SB[3] = doc.guides[1].coordinate.value;
      }
  if(guides[0].direction == Direction.VERTICAL && guides[1].direction == Direction.VERTICAL){
  var horzDistance = doc.guides[1].coordinate.value - doc.guides[0].coordinate.value;
  SB[0] = doc.guides[0].coordinate.value;
  SB[1] = (doc.height - horzDistance)/2;
  SB[2] = doc.guides[1].coordinate.value;
  SB[3] = ((doc.height - horzDistance)/2)+horzDistance;
      }
  activeDocument.selection.select([[SB[0],SB[1]],[SB[2],SB[1]],[SB[2],SB[3]],[SB[0],SB[3]]], SelectionType.REPLACE, 0, false);
  app.preferences.rulerUnits = startRulerUnits;
  }
  

• Is it possible to select only one column of a table for the redaction?

  Hi, converted a Word doc with a table in PDF format.  You will need to write a single column of the table.

  Is it possible to select only one column for the redaction?  When we select and drag downwards, it selects the other columns in the following lines.

  With the help of Acrobat X Pro.  Any help is appreciated.

  Hold down the CTRL key and drag a selection.

• Is it possible to synchronize a directory between two computers using ReadyCloud Desktop Client?

  Hi all

  Is it possible to use the ReadyCloud Desktop Client to synchronize a directory between two computers, i.e. of office and computer laptop?

  I use OS 6.4.2 and the latest version of the Desktop Client at ReadyCloud.

  In addition, both computers are running Windows 10 Pro.

  Thanks in advance

  Kevin

  Hello knocwans,

  Sorry, but ReadyCloud app is designed to allow you to synchronize folders computer device ReadyNAS and not from computer to computer. There is no option on the client where you select as the source computer and another computer as the destination.

  Kind regards

• photo selection between two dates

  In Photos

  It is possible to select photos between two dates?

  In Photos,.

  is it possible to select the photos between two dates?

  Thank you, thank you

  Yes.  With a smart album like this:

  

  

• Is it possible to make a button with multiple paths?

  Hello and good day everyone

  I want to make a flash game with a map leading to various locations for example school or beach like this http://www.yotreat.com/sites/default/files/190-160_1286.jpg

  If the player goes to the school she will find the Professor and if the player goes to the beach will be the coach.

  How can I make the player (for example) converses with the teacher at school, back to the main map and go to the beach to talk with the coach, but if she goes to school, even once, dialogue with the teacher is not the same with the first dialogue?

  = > > > It is possible to make a button with different paths to go? As if you watched the a-frame, then you press the same button again need you to part B? < < < =.

  Sorry for my confusing description... I hope you get the idea >, <
  IM so desperate... I searched for articles about this since yesterday and I still can't find one to solve this problem of mine.
  Making games is my dream... I've done a few very simple games, but I want to try a new level of difficulty

  Please help me? (> o <)

  Learn how to design solutions of programming requires learning what tools you have for you and how you can manipulate them according to your needs.  It doesn't matter if you make the games or anything else.

  Only you know the details around your design idea, but there are probably a number of management solutions with a single button to do different things.

  One way would be to use an array of information (such as the numbers of framework/labels) and have a counter that changes values when you use a button and this counter is used to index to select an element in the array.  So when you start the meter/index is 0, and he chose the images [0] table frames.  During treatment the counter/index is incremented by 1 so that the next deadlines [1] is selected.

  This same kind of approach could be used to keep track of how far went into a series of interactions, such as when you want to have a conversation with a character pick up where it left off instead to start over again.

  The key to everything that is store/keeping track of information.

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,