NAT 0 using the object in OS 8.6 NAT network

Similar Questions

• Can I create a form using the object styles in InDesign

  Hello

  Is it possible to create a form in the object Styles I can create in InDesign? I know that I can attribute some qualities, but I would like to create a capsule form that will be repeated throughout a page of lists in our sites.

  So far, I have to copy, paste, and anchor the object in the text which is quite time that we have thousands of ads, and life is too short for mundane tasks.

  If I can create a form of object Styles, by entering its dimensions, it will allow me to create the style for import into InDesign, 4 d, our CMS.

  If not, can we have it in a new construction, please Adobe?

  I look forward to your reply.

  Thank you

  Roy

  That can be done with tabs and styles nested using underscore with a custom stroke style. I hope that these screenshots should explain it...

  

  

  

  

• Place a marginal elements using the object styles

  Hello

  When I use this script I found this error.

  1 paragraph style = TA

  2 style of the object = TA

  3 library name = ANNO

  Script from here

  main();

  main() {} function

  If {(app.documents.length!=0)}

  {if(App.Libraries.Length!=0)}

  myStyleDialog();

  }

  else {}

  Alert ("Please open library.");

  }

  }

  else {}

  Alert ("Please open a document and try again.');

  Exit (0);

  }

  }

  function myStyleDialog() {}

  var myLabelWidth = 120;

  var myParaStyleNames = myGetParagraphStyleNames();

  var myObjStyleNames = myGetObjectStyleNames();

  myDialog = app.dialogs.add var ({name: "Choose the Styles instead of anchoring"});

  {with (MyDialog.dialogColumns.Add ())}

  {with (borderPanels.Add ())}

  {with (dialogColumns.Add ())}

  {with (dialogRows.Add ())}

  {with (dialogColumns.Add ())}

  staticTexts.add ({staticLabel: "paragraph Styles:", minWidth:myLabelWidth});})

  }

  {with (dialogColumns.Add ())}

  myParaStyleDropdown = dropdowns.add ({stringList:myParaStyleNames, selectedIndex:0});})

  }

  }

  {with (dialogRows.Add ())}

  {with (dialogColumns.Add ())}

  staticTexts.add ({staticLabel: "Object Styles:", minWidth:myLabelWidth});})

  }

  {with (dialogColumns.Add ())}

  myObjectStyleDropdown = dropdowns.add ({stringList:myObjStyleNames, selectedIndex:0});})

  }

  }

  }

  }

  myReturn = myDialog.show ();

  if(myReturn == true) {}

  myParagraphStyle = myParaStyleNames [myParaStyleDropdown.selectedIndex];

  myObjectStyle = myObjStyleNames [myObjectStyleDropdown.selectedIndex];

  myDialog.destroy ();

  }

  else {}

  myDialog.destroy ();

  }

  }

  }

  function myGetParagraphStyleNames() {}

  var myStyleNames = app.documents.item (0).paragraphStyles.everyItem () .name;

  Return myStyleNames;

  }

  function myGetObjectStyleNames() {}

  var myObjStyleNames = app.documents.item (0).objectStyles.everyItem () .name;

  Return myObjStyleNames;

  }

  myDoc = app.documents var [0];

  myLib var = app.libraries [0];

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  app.findTextPreferences = null;

  app.findTextPreferences.appliedParagraphStyle = myParagraphStyle;

  myFind = myDoc.findText (true);

  var myCount = 0;

  for (i = 0; i < myFind.length; i ++)

  {

  myText = myLib.assets.item ("ANNO") .placeAsset (myFind [i] .insertionPoints [-1]) [0];

  < < replace > > myText.insertionPoints [0] = [i] myFind .silence;

  <> <> myText.appliedObjectStyle = myObjectStyle;

  <> <> myText.contents = [i] myFind .silence;

  myFind [i] .move (LocationOptions.after, myText.insertionPoints [0]);

  myText.appliedObjectStyle = myDoc.objectStyles.item (myObjectStyle);

  myText.fit (FitOptions.frameToContent);

  myCount ++;

  }

  alert (myCount + "ANNOs are placed successfully...");

  For more information, I am attaching the file.

  

  Please give any solution for the issues mentioned above. When I want to change in this script?

  Thanks in advance...

  Just replace the loop in your script,

  for (var i=0; i
  I tested the script with CS5 windows. I found that the myFind [i] does not work. I think it may be because of its index changes after inserting library item after this paragraph. IE: myFind [i] includes the item inserted as well.
  Green4ever
  		   

• How to fill the value in the nested table by using the object type

  
  Hi gurus

  I created an object type and able to fill the values in it, now I want to create a nested table type of this object and fill it but looks like I'm doing something wrong, see my code below.

  Code example

  CREATE or REPLACE TYPE countries_o
  AS
  OBJECT
  (
  COUNTRY_ID TANK (2 BYTES),
  COUNTRY_NAME VARCHAR2 (40 BYTE),
  REGION_ID NUMBER);
  /

  create or replace type countries_t is table of the countries_o;
  
  /

  CREATE OR REPLACE

  ABC of the PROCEDURE

  IS

  v_print countries_t; -: = arr_countries_t('01','Aus',1);

  BEGIN

  v_print: = countries_t('01','A',11);

  DBMS_OUTPUT. Put_line (v_print. COUNTRY_ID | v_print. COUNTRY_NAME | v_print. REGION_ID);

  END;

  /

  Error

  • Error (6.3): PL/SQL: statement ignored
    
  • Error (6,12): PLS-00306: wrong number or types of arguments in the call to 'COUNTRIES_T '.
    
  • Error (7.3): PL/SQL: statement ignored
    
  • Error (7.32): PLS-00302: component 'COUNTRY_ID' must be declared

  Thanks in advance

  Concerning

  Muzz

  Hi user,

  Here is another method that you can try-

  CREATE OR REPLACE

  ABC of the PROCEDURE

  IS

  v_print countries_t: = countries_t (countries_o('01','A',11));

  BEGIN

  DBMS_OUTPUT. Put_line (v_print (1).) COUNTRY_ID | v_print (1). COUNTRY_NAME | v_print (1). REGION_ID); -you're accessinf the first element of the nested table, which in turn points to the object.

  END;

  In the sections of the declaration you have assigned values to the nested table.

  Kind regards
  Maxou

• After using the object &gt; path &gt; outline stroke

  on a line segment, I still have a central axis. Why?

  Are you sure that there no fill in the object?

• How to use the object Handle for Image cropping and rotation

  I downloaded the handle of the rogue 2,008 object that I need to know how to use it for cropp and rotate the Image.

  Contact the vendor of this product for more information on its use.

• How to return data using the object type?

  Hello all - I have an obligation to return the values object type.

  In the same way as

  list - Plan1, Subplan1, Fund1, 2 Fund Fund 3

  list - Plan2, Subplan2, Fund2

  list - plane3, Subplan3, not funds

  
  

  To achieve this I wrote below proc but its giving as response below which is does not correspond with my requirement. Someone has an idea how to write code to get the list of funds against each plan in each line?

  
  

  
  

  Output:
  

  PDB01. () T_T_CONTRACT

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f1')),

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f2')),

  PDB01. T_O_CONTRACT ('p1', 's1', PDB01. T_O_FUND ('p1', 's1', 'f3')),

  PDB01. T_O_CONTRACT ('p2', 's2', PDB01. T_O_FUND ('p2', 's2', 'f2')),

  PDB01. T_O_CONTRACT ('p3', 's3', PDB01. T_O_FUND (NULL, NULL, NULL))

  )

  
  

  
  

  
  

  DROP TYPE T_T_fund;

  create or replace

  TYPE T_O_fund

  AS OBJECT)

  argument plan_id Varchar2 (128).

  subplan_id Varchar2 (128).

  fund_id Varchar2 (128)

  )

  No final;

  /

  create or replace

  type T_T_FUND

  as the table of T_O_FUND;

  /

  type of projection T_T_CONTRACT;

  create or replace

  TYPE T_O_contract

  AS OBJECT)

  argument plan_id Varchar2 (128).

  SUBPLAN_ID varchar2 (128).

  ov_fund T_o_fund

  )

  no final;

  /

  create or replace

  type T_t_contract as the T_O_contract table;

  /

  -------------------------

  / * Remove T_T_FUND;

  DROP TYPE T_O_fund;

  type of projection T_T_CONTRACT;

  DROP TYPE T_O_contract; * /

  ----------------

  create or replace

  procedure test_cursor (o_c1 OUT sys_refcursor) is

  V_T_T_FUND T_T_FUND;

  v_T_t_contract T_t_contract;

  Start

  WITH (CONTRACTS AS

  SELECT "p1" PLAN_ID, "s1" SUBPLAN_ID FROM DUAL UNION ALL

  SELECT "p2" PLAN_ID, 's2' SUBPLAN_ID FROM DUAL UNION ALL

  SELECT "p3" PLAN_ID, 's3' SUBPLAN_ID FROM DUAL

  ),

  Fund)

  Select "p1" PLAN_ID, SUBPLAN_ID 's1', 'f1' FUND_ID of all the DOUBLE union

  Select "p1" PLAN_ID, SUBPLAN_ID 's1', 'f2' FUND_ID of all the DOUBLE union

  Select plan_id "p1", "s1" subplan_id argument, "f3" fund_id Union double all the

  Select the argument plan_id 'p2', 's2' subplan_id, 'f2' double fund_id

  )

  Select T_O_contract (c.PLAN_ID, c.SUBPLAN_ID, T_o_FUND (f.PLAN_ID, f.SUBPLAN_ID, f.FUND_ID))

  TO COLLECT FEES IN BULK

  in v_T_t_contract

  c CONTRACTS, FUND F

  where C.PLAN_ID = F.PLAN_ID

  and c.SUBPLAN_ID = f.SUBPLAN_ID (+);

  Open the O_C1 for

  SELECT 't' TYP, v_T_t_contract contract_LST

  FROM DUAL;

  end;

  /

  impression o_test

  You can declare the attribute OV_FUND as T_T_FUND data type:

  create or replace type t_o_contract as object (
    plan_id     varchar2(128)
  , subplan_id  varchar2(128)
  , ov_fund     t_t_fund
  );
  /
  

  You will be able to do this:

  with contracts as (
    select 'p1' plan_id, 's1' subplan_id from dual union all
    select 'p2' plan_id, 's2' subplan_id from dual union all
    select 'p3' plan_id, 's3' subplan_id from dual
  ),
  funds as (
    select 'p1' plan_id , 's1' subplan_id, 'f1' fund_id from dual union all
    select 'p1' plan_id , 's1' subplan_id, 'f2' fund_id from dual union all
    select 'p1' plan_id , 's1' subplan_id, 'f3' fund_id from dual union all
    select 'p2' plan_id , 's2' subplan_id, 'f2' fund_id from dual
  )
  select t_o_contract(
           c.plan_id
         , c.subplan_id
         , cast(
             multiset(
               select t_o_fund(f.plan_id, f.subplan_id, f.fund_id)
               from funds f
               where f.plan_id = c.plan_id
               and f.subplan_id = c.subplan_id
             )
             as t_t_fund
           )
         )
  from contracts c ;
  

• How to use the data object 'DatastoreHostMount '.

  I train to iterate on the grouping value in vCenter and for each data store found, determine whether a host has mounted data store or if it is visible to the host. I am using data object 'DatastoreHostMount' , but I don't know exactly how to use the object to retrieve the name of host configuration.

  Here's the perl code snippet and I get an error for:

  #get all hosts within cluster and check the connectionState and compare with all datastores found
  #is there a more efficient way to combine this section with the next section?
  
          my $hosts = Vim::get_views (mo_ref_array => $cluster->host);
  
          foreach my $host (@$hosts) {
                  if ($host->runtime->connectionState->val eq 'connected') {
                          my $datastores = Vim::get_views (mo_ref_array => $cluster->datastore);
                          foreach my $datastore (@$datastores) {
                                    print "  Datastore ", $datastore->host->summary->config->name,"\n"
                          }
                  }
                  elsif ($host->runtime->connectionState->val eq 'disconnected') {
                          print "\t|", $host->summary->config->name, "|Disconnected|\n"
                  }
                  elsif ($host->runtime->connectionState->val eq 'notResponding') {
                          print "\t|", $host->summary->config->name, "|Not Responding|\n"
                  }
          }
  

  Cannot call method 'Summary' on some wrapping 71 de./listCluster.pl.

  Disconnection of the end

  =========================================================================

  -William

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  OK, I remembered how it works. Sorry for the noise:

  |

  My $datacenter = Opts::get_option ('Center');

  My $datacenter_view = Vim::find_entity_view (view_type = > 'Data center',)

  filter = > {name = > $datacenter});

  If (! $datacenter_view) {}

  Die "data center" "» $datacenter. "" not found\n ";

  }

  My $cluster_views = Vim::find_entity_views (view_type = > 'ClusterComputeResource',)

  begin_entity = > $datacenter_view);

  My $counter = 1;

  Print "Clusters found: \n";

  {foreach (@$cluster_views)}

  Print "$counter:". "." $_-> name. "\n";

  My $datastores = Vim::get_views (mo_ref_array = > $_-> data store);

  foreach my {$datastore (@$datastores)}

  my $instances = @{$datastore-> host};

  my $instance = 0;

  while($instance < $instances) {}

  My $x = Vim::get_view (mo_ref = > $datastore-> Home-> \[$instance\]-> key);

  print $datastore--> summary-> name, "Datastore", $x-> name, "\n";

  $instance ++;

  }

  }

  $counter ++;

  }

• You can use the Braintree system in Adobe Muse

  Hello

  I have a question about working with Adobe Muse Braintree payment system.

  I have a client who wants to sell a product fixed single price through Paypal, but his account must be linked to their Braintree payment system.

  In Muse proposes to add a "buy now" button on the Web site that would link to the PayPal site. From there, the site visitor would connect you and proceed to payment.

  Can I assume that if the receiving payment account was using the Braintree payment gateway then it should work OK?

  Thank you very much

  Ben

  You wouldn't use Braintree and Paypal... basically, they do the same thing, authenticate a credit card. So if the use of Braintree is the mandatory application you would use who. I've never used Braintree so I don't know how their system works, but most of the authentication providers provide a widget that can be copy and pasted into a site. Any provider of embed code will work with Muse using the object--> the tool Insert HTML code.

• Security at the level of the object by creating groups of catalog in OBIEE - 10 G

  Hi all
  
  I have a requirement to display the dashboard based on the user login. Ex. Mike belongs to HR, Smith to accounts
  When Mike connects, he should see only these three dashboards. View of CF, commune data1, data2 common. When Smith connects, he should see only these three dashboards. Display accounts, common data1, commondata2.
  Commondata1 and commondata2 dashboards has joint reports for all departments. Other dashboards is particular department with all the different reports. How can I implement this?
  
  One of my previous posts, I was told to do by using the object-level security by creating groups of catalog. Can you please provide me with instructions to end-to-end on creating object groups of catalog-based security level.
  
  Thanks for your time and your help.

  Hello

  Mike to HR
  Smit - account

  Yes, groups reach you by security at the object level by creating catalog

  (1) create a catalog group and users partially RPD (Ex: Account_grp, HR_grp)
  (2) assign user to this particular group (say Ex: Account_grp = Smith and HR_grp = Mike)

  (3) login (username Admin) dashboard and---> gale dashboard page layout--> add users to this particular
  Dashboard users and save it then
  try to connect to the user mike and smith, it will work

  you see link below

  http://www.rittmanmead.com/2010/01/OBIEE-10G-Web-catalog-best-practices/

  http://www.rittmanmead.com/2007/05/OBIEE-and-row-level-security/

  Thank you

  Deva

• Line size changes when you use the rotation?

  Hello: Level: Beginner OS: Windows 7 64-bit

  So, I was using the line tool and then bringing together two lines and then using the object > transform > rotation

  The lines that I draw are 0px wide and 22px high but when I turn them around the Circle line sizes change...?

  Say the two lines are grouped and the first series is 276px on that the next series becomes say 276.346 and then 275.582 and 198.682 and so...

  I went in the palette to turn to see if there is anything I should check, but it doesn't seem as if I'm missing something to the best of my (limited) knowledge.

  I also tried the manual and looked for something like: "why size line would change on rotation" and I looked under transform and rotate, but I did not have a chance.

  As always... Thank you very much for your time

  What you read is the width and the height of the area of the path includes.

  Think of the hand of a clock. When it is at 12 it's thin and vertical. When there is 1, it takes much more space horizontally than to 12.

  You read the area covered by the path, not the dimensions of actual path.

  Basically, the numbers you read represent the pink boxes in this screenshot:

  

  The area required to draw the shape, not the dimensions of the form itself.

• Compensate for the path - stroke inside the object

  Hey,.

  Is it possible to use the lag path to define the scope of an object? My journey always ends inside the object. I have attached a picture of what's going on.

  Thank you!

  What seems to be the case there is that you have your background to the same color as your race, so when move you the shape, all you are able to see is offset fill outside the original shape, making it appear that the race is offset on the inside.  Make sense?

  When you use the object-> path-> offset path, you create a copy of the desired shape.  When you use-> path-> offset path effect... you will just move the selected path.  Maybe what you are looking for.

• Design &amp; formatting of the labels of the object

  I want to create labels on specific areas of an image.

  I placed the image in the InDesign document, a text label, rounded corners, added a stroke and filled the background. The problem is that I'm unable to vertically Center the text.

  When text frame corners are square, the text can be centered vertically using the object > text frame Options. Once the text frame angles have been rounded, the option to center the text vertically is no longer active.

  A sample of one of the images I'm trying label and the problem is attached. How can I vertically Center the text?

  Thank you

  Your image is still pending. Which part worked?

  If it was the vertical offset, I suggest do you a dedicated paragraph style (based on any model normal, you like) that the update built in and never use it for anything except the tags. Include the paragraph style in the style of the object.

  Peter

• I'll be able to use the external dvd drive on microsoft surface?

  I like really the surface so far and I was wondering if I'll be able to use an external dvd drive on the surface because there only 1 usb port.

  Yes.

  You can attach an external USB hub or port replicator and connect USB devices to one. And, if connected to the network, you can use the DVD player on any other computer network with any active permissinns and sharing.

  http://www.StorageReview.com/samsung_intros_wireless_optical_drive_and_portable_bluray_writer

  In addition, there are at least a DVD player wireless.

  Tom Ferguson

• Essbase extraction rating using the routine of HAL

  Hello
  
  I have a HAL routine that retrieves the level 0 members (and aliases corresponding) dimension and loads in an oracle table for further processing.
  
  I'm unable to load all the members of level 0 in the table. Only about 4,000 off the loaded 8000 in the table (total count recovered by extracting the dimension thru essbase addin).
  
  I also have the following exceptions (approx. 30) in the HAL exception log file.
  
  14/08/2009 | 115720 | Application/database | Error | Excerpt from Standard Dimension | Native exception code # 1 = 1042006Error = 1033 Msg error Code = [Fri Aug 14 11:57:12 2009] server_name/Application/Database/username/Error (1042006) network [10048] error: could not connect to [server_name:1423]. The customer has expired waiting to connect to the Agent of analytical Services using the TCP/IP protocol. Check your network connections. Also, make sure that the values for server and port are correct
  
  Essbase servers are running fine and other routines HAL are also running without network error.
  
  In addition, please let me know if anyone has any help HAL / error guide is available on google.
  
  Thanks in advance!

  Hello

  It may be a problem where too many connections try under windows, if that is the problem, you will need to make some registry changes.

  1. on the start menu, click Run.
  2. type regedit, then click OK.
  3. in the Registry Editor window, click on the following directory:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters

  4. in the Edit menu, click New, DWORD value.

  The new value appears in the list of parameters.

  5. type MaxUserPort and then press ENTER.

  Double-click MaxUserPort.

  6. in the Edit DWORD value window, follow these steps:
  * Click Decimal.
  * Enter 65534.
  * Click OK.
  7. in the Edit menu, click New, DWORD value.

  The new value appears in the list of parameters.

  8 type TcpTimedWaitDelay, and then press ENTER.
  9. double-click on TcpTimedWaitDelay.
  10. in the Edit DWORD value window, follow these steps:
  * Click Decimal.
  * Type 300
  * Click OK.
  11. close the Registry Editor window.
  12 restart the server

  See you soon

  John
  http://John-Goodwin.blogspot.com/