Passing parameters in URL

Similar Questions

• Pass parameters to URL AFTER Login page

  I send you a link in an e-mail to the partners which will lead them to a page with a SB access restricted to this topic. The server behavior restrict access redirects to the login page; which works very well. The login page works perfectly well.

  But the link in the email has two URL parameters on it, which is so that when the partner gets to the once connected landing page, these settings will filter the recordset and retrieve information specific to the individual and their contract.

  Problem: URL parameters appear to access the page with the restrict access SB on him (because they appear in the URL) and they were also highlighted in the URL of the page Login.php. But when actually, I hit 'submit' and connect, they are not passed that point to the destination page, so no information of the data table appears in the contract. I tried all imaginable combinations of recordsets and EEG and whatnot, and I can't get this look simple problem solved.

  Is there something unique in the connection or restrict access SB that strips the URL parameters?
  If so, how that overcome?

  So which cannot be overcome, how Session variables created by the operation of connection is used to extract the information from the data table?

  Interesting question. I studied the code to restrict access to the Page and think that this is the rub. What intrigues me is that you say that the variables are kept in the query string. They are not. The only thing that is in the query string is the page to which the user should be redirected after login. Fortunately, the solution is simple.

  Find the following section in the restrict access to Page code:

  if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
    $MM_qsChar = "?";
    $MM_referrer = $_SERVER['PHP_SELF'];
    if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
    if (isset($QUERY_STRING) && strlen($QUERY_STRING) > 0)
    $MM_referrer .= "?" . $QUERY_STRING;
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo);
    exit;
  }
  

  Replace all instances of $QUERY_STRING $_SERVER ['QUERY_STRING'] like this:

  if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
    $MM_qsChar = "?";
    $MM_referrer = $_SERVER['PHP_SELF'];
    if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
    if (isset($_SERVER['QUERY_STRING']) && strlen($_SERVER['QUERY_STRING']) > 0)
    $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo);
    exit;
  }
  

  The query string should now be kept intact when the user is redirected to the page of origin.

  I'll report this problem to Adobe.

  In addition, you can use find and replace to replace all instances of $QUERY_STRING $_SERVER ['QUERY_STRING']. If you're feeling ambitious, however, you can resolve this problem by modifying the configuration file that generates code to restrict access to the Page. In CS4 on Windows, the file you need to edit is C:\Program Files\Adobe\Adobe Dreamweaver CS4\configuration\ServerBehaviors\PHP_MySQL\RestrictAccess_main.edml. It will be in a similar situation in the Applications of Mac folder. Simply change all instances of $QUERY_STRING to $_SERVER ['QUERY_STRING'].

• How to set fire to a branch to pass parameters without url?

  is it possible to pull a branch when the user clicks on a link on the page. I have a report on a page #2 and one column is 'serialno. When the user clicks on the link, the application needs to go to the page #3 and view the details for the series. However, due to security restrictions, I can't spend the serialno in the url. is it possbile to set the page point serialno page #3 in the branch that directs the user to the #3 page and show the details? any ideas are appreciated.
  
  Kind regards
  Surya
  
  Published by: sgodavar on August 13, 2010 16:10

  Hello

  Here's what I think is an easy way to do it.

  1 edit the SERIALNO column in the reports attribute tab
  2. change the target of the link URL column
  3. in the URL, type the line below. #SERIALNO # is the column of the report

  javascript:doSumbit('#SERIALNO#') 
  

  4 write an OnSubit of calculation or process to assign the value of #SERIALNO # to the element in the Page 3 (say P3_ITEM1)

  a. assignment can be: P3_ITEM1: =: APPLICATION; (or SQL)
  b. calculation / condition of process will be the Expression of PL/SQL

      regexp_like(:REQUEST,'^[[:digit:]]).*$') -- all numeric request, no semicolon at end in Apex 4
     
  

  5. creation of a branch of the condition to go to Page 3, with regexp_like above as a condition.

  Here's what will happen.
  a. by clicking on the link of the report will cause a transmission with demand = serialno (supposed to be entirely digital in this example)
  b. trap you and process applications digital all assign them value takes the point on Page3.
  c. branch Page 3 on the same condition of application being digital.

  Above is the basic concept, you can do more complex and flexible using prefixes and suffixes in doSubmit and REGEXP_LIKE to allow multiple links of this type of a report.
  Kind regards

• Passing parameters to the URL - availability in the new process of request

  Hello

  I am able to pass parameters in the URL of the APEX that defined the points of the application as below

  : http://application-tier server: port/pls/apexdev/f? p = 1001:1:APP_CLIENT_NUMBER, APPLICATION_NUMBER:0001285, 0000051:

  I would like to get and set other items based on elements of application passed as parameters. I would like to only enter once application.

  I found the best place for this action in a process of application with Point on new Instance of Process.

  The problem seems to be that the value of point of application has not been set at this point, and therefore the values are null.

  If I change the application process process Point to something that runs to each page as On Load: after the header, then the values are available. It is not suitable as only wish to run once at startup of the application.

  I can't find discussion of this documentation.

  1. I would be able to access URL parameters in the application process with Point on a new Instance of the process?

  2. are there any other equivalent task for access to URL parameters at the start of the application?

  Thank you

  Hello

  APEX runs only on the new process Instance when a new session has been set up. As you discovered, URL items are not yet saved in session at this point State. You can use a level app process before header instead, with a condition that makes that make it run when certain elements that you want to initialize are null.

  Kind regards

  Christian

• Navigation after passing parameters to ADF via URL

  How you exit a page after passing parameters via a url as in the method in this link https://blogs.oracle.com/shay/entry/passing_parameters_to_adf_appl?

  I tried to drop this delimited task flow on adfc-config and adding a flow of control to another opinion, but I can't seem to access my opinion of this workflow call.

  In other words, I can call the workflow bounded through a url and pass it a parameter, but once it is posted I can't go to my other point of view.

  How can I do this?

  Thank you

  If you use a wildcard of navigation in the unlimited workflow as shown here https://tompeez.wordpress.com/2013/06/18/jdeveloper-navigation-after-return-from-bounded-task-flow/

  It should work.

  Timo

• Pass parameters to GO URL help - how to get the real URL?

  Hi gurus,
  
  I'm testing a method of passing dimensional values of the main report to detail report by clicking on the measured value in the main report. The idea is to convert the measurement column in a href HTML column, so it can pass parameters to the 2nd report using the URL GO.
  
  What I entered in the formula tab, it is like this:
  ''|| CAST ("sales facts". ("' Quantity ' AS CHAR (50)): ''
  
  Now when I click on the value of the measure, it can refer to the detailed report but cannot pass parameters. I have already added FILTERS to this report and set with clause IS GUEST.
  
  I have no idea why it cannot work because I do not see the actual URL, it has generated. The URL at the bottom of the page is incomplete.
  
  Is it possible to get the real URL? Expected my feasible approach?
  
  Concerning
  Jeffrey

  P2 is the target and P3 is the source column. P2 should be replacement of 20% for spaces.

  P2 = customer. "% 20Region" & P3 ='| " Clients. "" Country region |

  There are many examples of correct GO the URL code here in the forum, you just find it. :-)

  Concerning
  Goran
  http://108obiee.blogspot.com

• PowerCLI pass parameters

  Hello

  I want to pass parameters to my scriptblock in invoke-vmscript

  $a = "Hello".

  = {} Scriptblock

  Param ($Outside)

  write-host "Hello".

  $b = $outside

  }

  invoke vmScript - vm VM - GuestCredential Hello - ScriptText $ScribtBlock - arguementlist ($a)

  The ScriptText parameter requires a string not a script block in the direction of PowerShell.

  Substituting the parameters becomes much easier this way

  param(
  [string]$port,[string]$creds)
  
  $scriptblock= "{
  `$url=http://localhost:$port/ write-host `$url}
  "
  Invoke-VMScript -VM VM -GuestCredential $GuestCredential -ScriptText $ScriptBlock
  

  Note how you can use the escape character (backtick) to spend the dollar sign

• Passing parameters from HTML to Flash Object

  I know it must be very simple, but following the examples I can find on passing parameters from HTML to my Flash application, I have not been successful. I would like to find a relatively common using AS3, Flash CS4 example.

  If it helps, I need to pass the url of an XML file to the flash application so that it can get instructions on what it is supposed to play. We want to do in this way because we do not control the web site so that we can not just leave the XML file on the server and maintain as needed.

  I don't know if I'm just making typo or what. Share and other snippets of it would be greatly appreciated.

  Thanks for any help.

  Hey I think I know what you need to do, try this "" in the HTML code, and then create a Flash var like this:

  var xmlURL:String = this.loaderInfo.parameters.xmlURL;

  chance!, tell me if it works

• Pop-up - passing parameters

  I need some help w / pop-up windows and pass parameters in both directions.
  
  Page 7 (reports page), I have:
  -TXT_P7_SALESREP displays the name of the sales reps selected, by default, all the
  -CMD_P7_PICKSALESREP opens the popup window when you click
  -H_P7_SALESREPIDLIST stores the list of IDS (used to generate the report) currently selected sales rep
  
  Page 10 (page popup), I have:
  -CBL_P10_SALESREP a list check box, all of the VRP (by name)
  -H_P10_SALESREPIDLIST stores a list of the IDS of representative sales currently selected
  -CMD_P10_OK to submit the changes and close the page
  -CMD_P10_CANCEL to close the window without saving changes (I got this work already through the process of close popup window)
  
  The process should be something like:

  1) User opens report page, 'All' is displayed in the text box, and H_P7_SALESREPIDLIST contains all the sales rep ids 
  2) User clicks CMD_P7_PICKSALESREP to change list of sales reps 
        2a) Popup window opens & the value of H_P10_SALESREPIDLIST is set to the value of H_P7_SALESREPIDLIST
        2b) CBL_P10_SALESREP has values checked based on the value of H_P10_SALESREPIDLIST (all by default, but a user could change sales reps multiple times)
  3) User makes their changes and hits OK
        3a) Value of H_P10_SALESREPIDLIST is updated w/ list of currently selected sales reps
        3b) Value of H_P7_SALESREPIDLIST is updated w/ the value of H_P10_SALESREPIDLIST
        3c) Popup window is closed, returning the user to the report page
        3d) TXT_P7_SALESREP is updated via the contents of H_P7_SALESREPIDLIST
  4) User runs the report which is processed/displayed based on the values of H_P7_SALESREPIDLIST

  I tried to put some javascript:popupURL('f?p=&APP_ID.:10:&SESSION.::NO::H_P10_SALESREPIDLIST:&H_P7_SALESREPIDLIST'); in the target URL for CMD_P7_PICKSALESREP, but it did not work. I don't know enough about the passage of parameters and APEX-details to implement myself. Any help would be appreciated.
  
  I prefer this w / do as little javascript as possible coding, but I understand that it may be necessary.

  Hmmmm, this is weird @ no alerts

  Probably a syntax error in the JS (missing order, quote, brackets etc.)?

  CITY

• Pass parameters using SFWLoader

  I need to load a SWF (AS2/AS3) go in an AS3 SWF and pass parameters to the child. It works fine using FlashVars when loading a SWF from JavaScript. Now, I need to do the same thing with a Flex2 SWF file.
  
  I read several posts where people succeed in passing a flex application settings 2 to the SWF, using SWFLoader. I spend a day trying to get this to work but not luck. Read a lot of forum posts and some people claim that it works for them.
  
  The following code is an example. A swf file that loads again all showing the parameters in a label. If you run this in a browser with "test.swf? var1 = hello-world"then it shows well-Hello everyone in the label. Click the load button and it is supposed to load the same swf with another parameter var1. The SWF file loads well but CCET times that the label is empty. The query part of the URL that contains the settings seems to be ignored. What I'm doing wrong here?
  
  

  Quote:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Application
  xmlns:MX =' http://www.adobe.com/2006/mxml'
  verticalAlign = "top".
  Width = '100% '.
  Height = "100%".
  creationComplete = "init ()" "
  >
  < mx:Label id = "appParmsLabel" text = "parameters of the URI:" / >
  < mx:Button label = "Load test.swf? var1 = 123" click = "load1 (); "/ >
  
  < mx:Script > <! [CDATA]
  public var SWFURL:String = ' test.swf? var1 = 123;
  private function init (): void {}
  application.appParmsLabel.text += getAppParms();
  }
  Get the settings of the application
  private function getAppParms (): String {}
  var result: String = "";
  for (var name: String in application.parameters)
  {
  name of result += + ': ' + application.parameters [name] + ",";
  }
  return the result;
  }
  
  load swf flash
  private void hearings1 (): void {}
  Child.source = SWFURL;
  }
  []] > < / mx:Script >
  
  < mx:SWFLoader id = "child" / >
  < / mx:Application >
  

• passing parameters between different areas to help Navigate the column

  Hi all
  
  I know I can pass parameters between the reports through a few subjects by using Url go. However, I want to keep the functionality of the menu displayed when you use defyining multi target in the s column Navigate with drop-down feature. So the problem I encountered is the sequel
  
  (1) when I set some goals to navigate - is it possible to transfer parameters to these links point to destinations? (I tried to add them at the end of the link in the field "Target", but without success)
  
  (2) or alternatively - when you use GoUrl, can I define a < would display a href link that might point to places menu and mulitple drop down?
  
  I really appreciate your help with above
  Best regards
  Wojtek
  
  Published by: user1291979 on October 7, 2009 11:51

  -without add nothing more to this link, selected GEOGRAPHY. COUNTRIES must be passed to destination and > must complete guest there? It works that way in my environment

  If you are using navigation on the current query column properties and component the dashboard then the query current source column is analyzed on the quick dash in both have SAME_TABLE. The names of SAME_COLUMN, else parameter is not parsed.

  Target: / shared/Adecco01/_portal/01 edge/weekly table dashboard
  You don't enter anything

  He must complete only the GEOGRAPHY. COUNTRIES in the reports within the area where the source report comes from?

  If you use the navigation on the properties of the column and the call to another then asks the current column is analyzed on the query target only if in the SAME_TABLE target. SAME_COLUMN value IS INVITED, another parameter is not parsed. Report of the target and the source may be on different areas but we need SAME_TABLE. Names of SAME_COLUMN.

  If you use GO URL, URL of the dashboard EDGE or the other, I already explained.

  Concerning
  Goran
  http://108obiee.blogspot.com

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Passing parameters to dynamically loaded screws

  Hello

  I have a data acquisition application that uses an analog input, PCI-Hardware.
  With this material I enjoy different channels and display them in audio
  In operation 'Preview' I enjoy 4 channels and display them in 4 audios.
  I have therefore a quarter of the maximum sampling for each channel.
  Operation 'zoom' I only enjoy a channel (at the material max sampling rate)
  and display the data in the selected channel (the other channels are igored in zoom mode)

  My idea is to launch the different screws according to the mode (overview, zooom).
  I could imagine, that a good approach to perfom this task calls different screws
  of the main program.

  Unfortunately, I do not understand how to pass parameters to the VI if I call them
  using knots "reference open VI", "call for reference" and "close reference VI.
  I tried to understand the Labview "Example of dynamic load", but it's too complicated for me.
  Can someone give me a simple example to dynamically load the screws or y at - it white papers
  or nugets on this topic?

  
  

• Passing parameters using ADR - 404 error

  Hi all

  I'm all new development APEX. We use the DEPT tables in the sample application oracle provided for practice.

  We currently use ADR to pass parameters, but it does not work as expected, or at all. We receive a 404 when you try to run the page.

  Objective: User enters number of Department for an article and a 'Change' event (or "lose focus", we have not yet decided) on a dynamic action fills the name field with the name of the service dept.

  Has anyone else got this error?

  If there is another method recommended, please let me know.

  Thanks for your time.

  Thanks for the answers, but we have understood the question.

  We have changed the JavaScript code as follows:

  $.getJSON ("https://apex.oracle.com/pls/apex/mfajertest1/department/"+ $x value ('P2_DEPT_NO'), function (json))

  {

  Console.log (JSON);

  $x('P2_DEPT_NAME').readOnly = false;

  $x('P2_DEPT_NAME').value = json.items [0] .dname;

  $x('P2_DEPT_NAME').readOnly = true;

  $x('P2_DEPT_LOC').readOnly = false;

  $x('P2_DEPT_LOC').value = json.items [0] .loc;

  $x('P2_DEPT_LOC').readOnly = true;

  });

  Thanks for the effort.

• Anyone know how to pass parameters of taskFlow entry in MultitaskFlowBinding?

  How to pass parameters of taskFlow entry in MultitaskFlowBinding?

  While we might get these within regions in multiTaskFlow Binding input parameters.

  Check -http://www.awasthiashish.com/2014/08/create-taskflow-and-region-binding-at.html

  Download and view the sample application, it shows how to pass inputParameter using a HashMap for multiTaskFlowBinding

  Ashish