Navigation buttons, staged at the incorrect slide

Similar Questions

• Button next to the quiz slides...

  I'm working on a quiz in Captivate 8 and I have a dilemma:

  1. If participants click Next (after having a response) and no shipment, they can get to the next slide, but their responses will not be saved and they receive no feedback if it was good or bad

  2. If we remove the button following and participating, click on send and then return to a previous slide for some reason, they aren't able to go beyond the slide, they argued, already.

  Any suggestions on the best way to handle this?  Is it possible that you can Submit, so we can click on it more than once?

  You might find a lot of details in this post (very busy) blog:

  Question Question slides in Captivate - Captivate blog

  Up to CP8 the next button had a double feature:

  1. During the quiz, it has the function of a "Skip" button
  2. During the review, it works like a real button below and must be present to allow navigation

  You can read my solution is to drag the button under the clear button, to avoid confusion for users between Submit and. When they are in review mode, the "Clear" button disappears and the next button appears.

• Captivate 6 buttons go to the next slide instead of perform the selected action

  I have slides with one or more buttons on them. Success, they generally show or hide the any content or graphics. Sometimes, these buttons work correctly. Other times, when a button is clicked, the path forward to the next page. Any thoughts on what could cause this problem? I publish the course as SWF / HTML 5.

  Replace the simple action by a standard action to avoid releasing the read head. The behavior described in this blog, was valid for all versions up to 8 Captivate. Only to the CP9, it is now possible to stop the playhead to continue during the execution of a simple action:

  Why choose Standard Simple action? -Captivate Blog

  This position also has a link to a YouTube video showing the behavior in a real use case.

• Audio editing to the incorrect slides

  I'm creating an online orientation course which includes the voices. The problem that I am running is that there are a few slides that publish with audio from other slides in the module. For example, slide 34 plays audio from slide 89 when published. When I check the audio component in edit mode, it plays the sound. I'm doing something wrong or what is another bug, the largest number in Captivate (v3)?

  Hello

  Abu_Luke wrote:

  I'm creating an online orientation course which includes the voices. The problem that I am running is that there are a few slides that publish with audio from other slides in the module. For example, slide 34 plays audio from slide 89 when published. When I check the audio component in edit mode, it plays the sound. I'm doing something wrong or what is another bug, the largest number in Captivate (v3)?

  While I will not deny that Captivate has bugs, I'm not sure that there are all that many.

  I've seen others report problems with audio do not match. I think I saw also that the following steps will correct it in general.

  To correct the audio incompatible:

  1. Change the slide incriminated, where first shift happens.
  2. Note the name of the audio clip.
  3. Export the audio clip as a. Mp3 file.
  4. Visit the account where you exported the clip.
  5. Rename the audio element.
  6. Back to Captivate and replace the audio by importing the renamed clip.

  Hope this helps some... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Adding buttons to the quiz slides

  I want to add a button 'Continue' on a quiz

  Slide, so that the user can take as much time to read the comments and then on the next question or the next task in e-learning.   The problem is that the icon of the button (to add new buttons) is grayed out in the slide of the questionnaire.  Similarly, I can't paste the navigation buttons I created for other slides on quiz slides.  How can I get around this (I'm not a programmer so don't want to try to create widgets)?

  Thank you, Richard

  I've had success with that by creating the button in a new project only 1 slide - and important "objects" only on my blade of quiz - the properties of the button remained intact (with the exception of the multiple actions)

• Problem with the use of the lightbox in combination with buttons on the Master slide

  I want to use one have a Walker of popup layer (with content), the user clicks a button on the slide.  The user can close with a button which also appears Walker that the lightbox appears.

  The lightbox layer covers the complete breech the user should click the button close before the next slide can be visited. Everything works fine

  Problem:

  Then I used and prevoious buttons on the slide master and although the layer seems to be on the top of the next and previous buttons, they stil working.

  How can I prevent the buttons on the master slide to work Walker watch the light table?

  Vico

  Each interactive object remains active even if it is covered by a non-interactive object.

  More information on the use of the shape of the buttons, either model of slides or time during the rest of the project: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  ATTENTION: during time during the rest of the project, to make visible everywhere normally you put on top. But in this case, which means they'll be on top of the viewers. I did pass on the viewers once, maybe I should write in a blog.

  Lilybiri

• Navigation buttons do not work during audio playback

  I have a dysfunction of the brain...

  I use the audio function TextSpeech on 20 slides. I use a master slide to contain my header and footer. The footer includes my navigation buttons. While the audio is playing, the buttons do not work. As soon as the slide audio is finished, the buttons work. What I've done wrong?

  I built the main navigation using my personal button images and click on the boxes, built on a page standard, and then stuck in the slide master, a process that I used previously.

  By the way, if place the buttons of navigation (footer) on each slide, they work as I expected. I don't like all these items repeated on the timeline of each slide.

  Any ideas?

  Thank you

  Jack

  Captivate 7

  Windows 7

  I tried to reproduce this error. In the standard slide, I placed an image, added a box to click it and assigned her to take action on the next slide. When I paste these two objects on the slide, click box is stripped. So, when I presented in preview the project, I was automatically slide next without having to click on anything that it is me. (Since the click box to which I assigned the action is missing).

  However, the solution to this is that you can place a button smartshape modeled on slides, entrust your image and add the necessary action. The release works as expected.

  Anthony

• Add the button to play the Audio

  Rick and other experts, it should be easy, but heck, I can't make it work.
  
  Location: 6 Captivate slide 2 (any text, from PPT). Next navigation control button appearing a.5 and stopping at 5.5 no other objects or chart on the slide back and forth.
  
  Problem: I want to add a 'play' button, which will allow students to hear an audio summary of the information. However, I want the button to appear also a.5 seconds. I tried different variations, but no matter where the play button is or where the 'pause' is placed on the timeline, the audio still works without clicking. I don't want to do this.
  
  Any solution other than a jump to?

  Hello

  There should be several ways to do this.

  * If the sound is at the level of the slide, phase it so it's not 'appear' to a.5,.6 ou.7 seconds in. Then configure the button to pause seconds a.5.
  * Configure the button with a legend of success and set the audio to the legend of success
  * Insert the audio on the next slide and have the button simply open the next slide

  There are other ways as well. Just threw a little.

  See you soon... Rick

• Drag-and - drop 'submit' button and hand - 9 Captivate slider

  Unlike normal questionnaires 'submit' buttons, the Captivate 9 Drag & Drop 'submit' button does not appear able to show the hand cursor to the passage of the mouse.

  Importing a project of Captivate 8 to 9, it sometimes works, sometimes doesn't work, so I can't find a way to make it work on naked new projects created with Captivate 9.

  The Drag & Drop option "Use hand cursor" is clearly displayed, although affecting only the sources and targets but not the button 'send '.

  Captivate 9 runs on Windows 7.

  Thanks for the help,

  Matteo

  Moderator: I took your personal address, this is a public forum

  I'm sorry, but the button submit in D & D seems to have the ability to display the hand cursor. It uses the same style buttons embedded on the Quiz slides, but the hand cursor doesn't do not part of the style. I've often done drag the button to send off the stage and just set hotkey (as input).  I also checked in Captivate 8 but he has never had the option to display a hand cursor to the button send D & d, so I'm surprised when you write "when you import a project of Captivate 8 to 9, it works sometimes"

• Sound does not stop with slide - sound pieces of the next slide

  After four hours of pounding on it and do not understand, I succumb to the demand in the community.  Here's how I did:

  6 blades (just started the project and decided to test it)

  Every slide except #2 has audio speech synthesis of the direction of speech. (I used Paul, but that shouldn't matter)

  I have a button on each slide to continue so that the blade stops for the user to view graphics, etc.  Button action is the next slide.

  When the slide plays, he reached the end of the audio and continues to play audio on the following slides, even if the blade has failed.

  Why didn't t - it's not the sound that stops at the end of the slide?

  You misunderstood what I tried to explain. There is no sense of silence if adds the audio clip itself (should be noise). But in the timeline panel, move the timeline audio off the beginning of the slide and leave space after him as well. Something like 0, 2secs

  

• Is it possible to disable the navigation of the bar (next button) until a user navigation complete and action on a slide?

  I do not want to build a custom user interface.

  No, all the buttons on the playback bar are "black/white", if you show them that they are always available. And also if you have the progress bar, the user can just quickly rub by a large number of slides.

  Custom navigation is not so hard at all, with buttons of form that can be put on the master slide or timed for the rest of the project.

• Substitute for slides ramifications navigation buttons?

  Hello

  I develop a Captivate 5.5 lesson that uses a navigation bar overall (the forward/back arrows, progress bar, etc.); However, I created a business of branching in which I don't want users to be able to navigate with the arrows forward/backward. Is it possible to replace the navigation bar on individual slides, or is there a tip Action that I can create to accomplish?

  The problem is that the activity is branching out, but not locked. in other words, students can enter at halfway in the activity and decide to skip and continue with the lesson. If they do, when they click on the arrow to the front, they should consult all of the remaining slides in the activity before reaching the real 'next' slide in the lesson. I have created custom buttons "continue with the lesson", but the question with the forward/reverse button is active...

  Any thoughts are appreciated!

  Hello

  It's about reading bars Captivate? There is a cpCmndShowPlaybar of system variables. Its default value = 1, which means that the PlayBar is visible. You can set it to 0 when entering the slide where it must be hidden and set again in 1 place where to display. No need for a tip action, this system variable is available in the drop-down list in the properties of the slide Action accordion. Choose assign as action type, and then in the drop-down list, select the system variable

  Lilybiri

• In the new version of Firefox 29.0.1 removed the ability to move the right side navigation buttons. Restored version of Firefox 28.

  I always work hard and with Firefox. My customization assuming that it is transferred always organize buttons back and forward in the navigation bar on the right side which was convenient for a quick job. In the new version of Firefox 29.0.1 deleted the possibility of moving the navigation on the right side buttons... Firefox is not flexible enough for the user. Really sorry. Restored version of Firefox 28. More frequent to not remove the flexible adjustment of the navigation keys. Thank you.

  28 Firefox has security flaws. It is not safe to use.

  • https://www.Mozilla.org/security/known-vulnerabilities/Firefox.html

  You can move the navigation buttons in Firefox 29 if you install an add-on.

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure 'Mobile back-forward button' is checked. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. Drag the previous/next buttons wherever you want.
  7. Click the Customize the output at the bottom right button when finished.
  • How to make the new look of Firefox as the old Firefox

• How can I change the color of the icons of navigation buttons?

  I was wondering if there are modules or mods for 25 of Firefox that would allow me to change the color of the icons on the navigation buttons.

  I think along the lines of the old style where the buttons next and previous lit up green reloading, in blue, stop at home with a mixture of yellow and white, and red when, they are clickable.

  I find with Firefox 25, I get light when gray grey and dark grey when active, I think is a little hard to tell at a glance. I prefer the colour keys and hoped there was an add-on that would allow me to change this in Firefox 25.

  You will need to search the site of Mozilla Add-ons to see if you can find a theme with colors that suites you.

• The orange Firefox button and the Navigation toolbar is on the same line

  Someone interfered with my Firefox settings and goofed a bit. Now the orange Firefox button and the Navigation toolbar are on the same line/line, as shown in the image below. Can you help me with the Firefox orange button at the top of the Navigation toolbar (as usually is the case)?

  http://PUU.sh/4NoO8.jpg

  Thank you very much! I had this same problem. I'd rather have my tabs at the top, in line with the orange. For some reason any that an add-on reset my 'browser.tabs.drawInTitlebar' to false, which looked horrible and wasted a whole bar of space by the presence of a large space empty on the top of my screen. It fixed my problem!