NavigationPane property and objectname explanation

Similar Questions

• Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Connect does not collect IP addresses. Records can follow who saw them if viewers are journaled in Connect.

• Nodes property and rings of Menu

  So I have this multimeter I need to make a driver for, and it has so many modes/scales of operation it will be a pain.

  

  So that's what I'm working with, there are a lot of 'functions of measure', including the tension continues, alternating voltage, current DC current alternative, etc, there is more than what is shown in this picture, but functions are the first row in the table above.

  Associated with each function is a set of ranges. GPIB codes for each range are on the left most column, and you can see what they are in the other columns.

  To manage the functions of measure and the beach in this driver I have, I'll use 3 sub.vis:

  The first sub.vi is very simple, consisting of a ring of unique menu, a number to string converter, then a concactenate string, shown in the first attachment. It sends the command of the unit function.

  The third sub.vi is also quite simple, it sends the range control to the device.  This is the sub.vi between the two that I need help.

  What I want is to have a single control of the range , in the form of a ring of menu, and the 2nd sub.vi reformatted this menu ring. So what I need is to use a property node to set the line items in the ring menu to match with items included in the 6 columns above, so that if the function is chosen to be volts DC, the menu range ring will show 3mV 10mV, 30mV, 100mV, etc etc, but if the function is chosen to be alternating current the menu range ring show 3uA, 30uA, 300uA, etc etc.

  The other tricky part of this is that the voltage and the current functions of the AC pass range controls (see how there is no range associated with orders R2, R4, R6, etc.).

  That I'll probably be able to come up with something clever to treat (as simply double the value coming out of the ring and incrementing it with a + 1 on these functions to make them all odd), but for now I need help in the form line items in the menu ring.

  Attachment 2 was my first attempt to simply edit the line items in the menu ring.  Unfortunately the way it is put in place, he crams this whole string them in 1st command line, rather than separate.  I don't know how to change one of the elements of the past that 1st menu ring.

  Hope I explained quite well, make me know if I need to be clearer.

  You use the wrong property.  The property to use is 'Strings' and the entry is an array of strings.

• Property and directors vs users

  I have read several questions on this subject, but none have really explained the different levels of the property.

  I have Windows 7 Pro.

  I went to move a shortcut to a folder and had denied access with the message, "you need give the administrator permission to move to this folder."  Well, I'm the administrator of this computer, so what's the problem?  This computer has one account in my name which is an administrator account.  The message window was a button continue so I chose that and got another window the message, "you must" authorized to perform this action, how I give him permission?  I am the administrator!

  So I did some research and discovered that there is some type of property problem. By selecting the properties for the folder and selecting the Security tab, Advanced button, owner tab, I see that the owner of this folder is administrators (ComputerName\Administrators.  Below that is the ability to change the owner of «MyAccountName» (ComputerName\MyAccountName)

  What or who is the owner of "Administrators"? (ComputerName\Administrators)

  How is this different from "Users (ComputerName\Users)?

  If my user account on my computer is an administrator account, why not I the owner or permission to the group "Administrators (ComputerName\Administrators)?

  What should I do so that I NEVER see this again for any file, folder or something else on this computer? I am the administrator, WTF?

  You are probably faced with a problem of UAC, rather a question of ownership, but unless you post the full name of the target folder that is only a guess. In the meantime use Windows Help for the UAC and its purpose.

• How to get the value of the property and the hierarchy specified in a global property, by javascripts

  Hi DRM team:

  I want to get a property value and precise when the hierarchy from. So, I thought that LocalNodeObjects method GetReferenceInHier (hierAbbrev), but the question is coming, I'm working on a global property, node. GetReferenceInHier (hierAbbrev) is not available. How can I get the value of the specified node hierarchy?

  Thanks for any response.

  Jim

  Hi Jim.cyciopes

  Try this-

  var worm is node. Version;

  var hier_ref = worm. HierByAbbrev ("name of your hierarchy");

  var node_ref is hier_ref. NodeByAbbrev (node. ABBREV);

  {if(node_ref!=null)}

  var propval is node_ref. VarValeurProp ("YourPropertyName");

  }

  Return propval;

  Thank you

  Denzz

• How to adjust the property and expenses (asset) in Oracle Asset R12

  Hello
  
  Let say if it is must be remove and active input which are loads manually and when deleting, I am wrong, which means the real thing that I should be posted but I delete and asset (EXPENSE) I should be delete is displayed with me. There is a possibility to consider human error. What should I do?
  
  Thank you

  Hello

  you mean stage massive addition interface.
  Case A) you deleted by mistake a mass addition line that should be shown as an asset
  Case B) you published a line of massive addition that should have been deleted by mistake.

  For case A,.
  You can create a manual asset in the FA Module for the line well deleted.

  Case B,
  (1) you have the ability to remove assets that is added to the current GOLD period (before the treatment of depreciation)
  (2) make a full retreat of the property

  In addition, creating fresh asset has ZERO financial impact, NO accounting impact, it is simply that as a follow-up.

  Kind regards
  Ivruksha

• Difference between the isolated property and cascade delete

  Hello
  
  I property remove relationship in the master / detail in material form. By using the isolated and cascading deletion property, both produce the same result. Setting the deletion as the child isolated property are also supprimés, which is contrary to the statement of isolated property to delete.
  
  Try to clarify my doubts.
  
  
  Thanks in advance

  I rtied using Forms 10.1.2.0.2 against 10 g-data base.

  When the isolated use and removing the master, the details are removed from the form, but when commit that the master is removed, the child records still exist in the database.

  I guess that there is somewhere is code in your which removes the details.
  If you don't find anything, maybe its useful build a testcase very simple to check if it is somewhat related to your tablestructure.

• break on first step property and tracing

  Hello

  Miss me the property to dynamically assign "Execute"--> "breaking the first not." Those of you who know where it is?

  (As an example "Break on the step failed" is "RunState.Engine.StationOptions.BreakOnStepFailure")

  Also missing properties to "Enable Tracing in Setup/Cleanup" + "allow tracing in Pre/Post-Step reminders" +... (the rest of the indicators in StationOptions).

  Thanks in advance

  Vagn

  Vagn salvation,

  The break on the first step property is available through the Application Manager, so you can access it using a step of the ActiveX. This knowledge base Article explains how to access the Manager from the Application of the sequence editor environment.

  Tracing options can be set using the Engine.StationOptions.ExecutionMask property.

  I hope this helps!

• Bug? Photo ring String property and values' returns the error 1054 in LV 8.5

  

  This property must exist for a ring photo?

  Ben

  James W wrote:

  I take it from what I read here that there as no way to programmatically update the values of a ring of photo running then?

  ...

  You are right that a RING of photo may not be populated at run time. On the other hand an image can be updated.

  This thread has many links to examples of photo.

  These tags can also help start with the photo of LV.

  Have fun!

  Ben

• About 1 week ago, whenever I me chaque fois que je me serait would connect World of Warcraft internet in my entire House would break. I never had this problem before you get Windows 7. When I got to the computer, I could log on to the property and no impa

  * Cannot connect to World of Warcraft
  * Internet crashing

  If the Internet in your entire House crashes because you have started a program, wouldn't you say that the program is the cause? That would be my first guess. You have 2 pair patch activated for World of Warcraft? This can cause some modems and routers to crash because of the number of sudden connections, it must manage. Any torrent application is the same way. Try to disable in the patch and see what happens. I really doubt that Win 7 * only * is causing your whole House to lose internet.

• "Installation Failed", no CC apps install and no explanation why

  Hello

  I'm a user of Adobe but fairly new user CC and last night I tried to install rather old and the ID of the trial on my MacBook Pro, and don't get up to 42% when I got an installation error that has no more info to it. Assuming that it was a problem with the application of Office CC, I tried to download ID by direct link and tried to install it and the result was the same: the installation bar will not yet up a notch and I had this "Installation Failed" window, without code error or any other information about what was going on. It is then that I realized that body and AE, I have already installed worked is more: when I tried to open them I got a window saying "Adobe Application Manager is needed to solve this problem." I followed the instructions and I was told that if I used CC I had to reinstall CC. Which I tried to do but not had any luck: whenever I open CC, I had an empty window. So, I followed the instructions on how to fix this and had no luck either. To make a very long story, 4 short hours, in the end, I used the CC to 'Cleaning up' AAM cleanup tool so I'll be back any body and AE. Then I was able to reinstall CC and he is currently working. But, again, I am trying to install ID (this time only manually, I'm sure he tried to install it by CC which has damaged the MAO) and I get the same generic Installation error 'Fail', for which I can't find ANY specific information anywhere, nor any means to solve it.

  I would be very grateful for any information you could give me to fixing this problem. My MBPro is barely a week and that she already has a LOT of problems with Adobe and if now I can install are more produced Adobe on it, then it is absolutely useless to me because all of the work that I do I do it on Adobe software.

  See the link below:

  Failed installation

• Table or list for images icons and their explanation?

  Hello

  In our user manuals, we have descriptions of the icons next to the image of the respective icon. So far I've always used a table, but do not allow the elements in array is predefined in DITA for a narrow first column and the second column wider. I appreciate any suggestions how I can do this in structured FM.

  Yes... Tables DITA can specify the width of the columns. This is done with the table/tgroup/colspec/@colwidth attribute. FM, you should be able to simply drag or set the widths of column by means 'normal', and it will remain. Note that by default, you will use proportional widths (as specified in the rules of r/w file), the table will always fill the text column.

  Note that if you use "binary" DITA files (which means, you return in XML format, but keep as structured FM files), you will probably lose some benefits from the use of DITA. This isn't necessarily a bad thing if what you need, but just be aware what's you use DITA structured file FM, which is very different with XML DITA.

  See you soon,.

  .. .Scott

• public property and instantiation of the component problem

  Hello everyone.

  I tried to tackle the flow of instantiating components and do things in the right way, but I seem to run into problems.

  For example, I have a custom, with some variable public properties exposed component. I create my component and set my variables like this:

  PARENT

  BTN = new ConditionBtn();

  btn.aXML = myXML;

  btn.addEventListener ("change", answerChangeHandler);
  this.addChild (btn);

  
  And inside my component, I am trying to manage the instantiation like this:

  CHILD COMPONENT

  private var isSelected:Boolean;

  before initialize event handler

  private function preInitialize (): void {}
  }

  initialize the event handler
  private void initialize (): void {}

  If (aXML.@selected == "true") {}

  selected = true;

  } else {}

  selected = false;

  }
  }

  the creation complete event handler
  private void creationComplete (): void {}
  }

  This does not work well because when the initialize event fires, aXML shows that NULL when debugging. It is not sensible to me, but because the initialize event is not raised until I call this.addChild of the parent, which is done AFTER I put the value of aXML in my component so you would think that data should be there already.

  I tried to move the logic in the creationComplete handler but aXML is always set to null at this point. The work around I'm doing creates another function I call hand after I add it to the scene like this:

  PARENT

  BTN = new ConditionBtn();

  btn.aXML = myXML;

  btn.addEventListener ("change", answerChangeHandler);
  this.addChild (btn);

  btn.bindManually ();

  CHILD COMPONENT

  private var isSelected:Boolean;
  public function bindManually (): void {}

  If (aXML.@selected == "true") {}

  selected = true;

  } else {}

  selected = false;

  }
  }

  Now it works, but this seems like a very bad practice. Isn't that the point of all the pre-init and initialize events is to allow you to configure your component prior to when he emerges finally everything is configured and that it should not be re - install?

  I'm doing something wrong?

  Ago a well defined lifecycle you use that involve createChildren(), commitProperties, measure and updateDisplayList.  See the doc on creating custom components

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Store a NavigationPane as a QML property

  I have code similar to the following places:

  onTriggered: {
      var chosenItem = dataModel.data(indexPath);
      var detailPage = detailsPageDefinition.createObject();
      detailPage.initDetailsPage(chosenItem);
      // Push the content page to the navigation stack
      main_list_nav.push(detailPage);
  }
  

  detailPage must also push the NavigationPane, but the problem is I have a couple of different NavigationPanes and the detailPage knows not only push you on.

  I want to be able to switch the navigation as the parameter pane to initDetailsPage() i.e.

  detailPage.initDetailsPage(chosenItem, main_list_nav);
  

  But how I declare this as a property? by DetailsPage.qml

  Page {
       property  navigationPaneToUse
  
       function initDetailsPage(item, navPane)
       {
            navigationPaneToUse = navPane
            ...
       }
  }
  

  If not, is there a property QML on a Page that tells it what NavigationPane he pushed to?

  Thanks for all the help guys. Suite suggested Zmey using the idea of the .parent property and generalizing javayoung above, I came up with this method I set on my UI root object, if it's available everywhere.

  It crosses just to the top of the tree of the child until it finds an ancestor with an object name that contains "NavigationPane", then push on that. In this way, that you don't need to store anything.

      function pushToParentNavigation(child, objToPush)
      {
          var cur = child;
          while(cur != null && cur.objectName.indexOf("NavigationPane") == -1)
          {
              cur = cur.parent;
          }
          if(cur.objectName.indexOf("NavigationPane") != -1)
          {
              cur.push(objToPush);
          }
          else
          {
              console.log("No NavigationPane in heirarchy!");
          }
      }
  

  So now I can just do this anywhere:

  // Push the content page to the navigation stack this page belongs to.
  pushToParentNavigation(this_page_id, myUIObject);
  

  This means that you must add objectName: 'NavigationPane' to all your NavigationPane who isn't ideal. If anyone can suggest a better way to do it, it would be great. I looked at JavaScript typeof operator, but it is not powerful enough.

• What the property QGeoPositionInfoSource to reset and reset valid types are doing?

  Hello

  I found a property Reset inQGeoPositionInfoSource and Valid reset types are "cold", "warm", "hot", "factory", "ee_data", "almanac", "ephemeris" ????
But unable to found what is the purpose of this property and what are these valid Types do???


  Reference: http://developer.blackberry.com/cascades/reference/qtmobilitysubset__qgeopositioninfosource.html

  Can someone help me with this?
  Fadi

  Hi Fadi,

  The reset property to reset the GPS receiver on the phone. Valid types involve degrees of reset State. Over time, GPS receivers collect and store data that can be used to help either place resolves quickly and accurately. However unlikely, is that a GPS receiver can get into a bad state, it may still be necessary that it should be reset. What each type of reset means may depend on the GPS receiver (it can vary between phone models). Some things can be qualitatively derived type name and knowledge of GPS terminology.

  Be aware that if you set the reset of the receiver is not actually reset until a post is requested later (i.e. by calling QGeoPositionInfoSource::startUpdates() or QGeoPositionInfoSource::requestUpdate ()). Also, the reset may cause a significant delay until the next update of position occurs.

  Kind regards

  Jim