NB100 with Vista Restart with a Wi - Fi connection on

Similar Questions

• My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  Hello

  Try Microsoft fix it in the next article

  "Windows Vista cannot obtain an IP address from certain routers or some non Microsoft DHCP servers": http://support.microsoft.com/kb/928233

• Satellite L35 (US) with Atheros AR5005G wireless connection problems

  I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.

  While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.

  I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.

  The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!

  Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.

  All regional/language settings in the control panel have been updated with the United Kingdom.

  No undates are available for the Atheros Driver or BIOS.

  Anyone can help identify the problem/possible settings to change?

  Hello

  Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.

  However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.

  I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
  In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• Satellite A660 / 07P - problems with my browsers, internet connection

  Hey guys,.

  I just brought a Satellite A660 / 07P.
  I have problems with my browsers, internet connection.

  After a period of time (varies) my browsers stop to connect to internet.
  Skype works fine, as does my download manager and other internet services.

  When I run an internet system restore works again for a period of time, before picking up the handset.
  I used this happens with all browsers (IE, Firefox and Chrome).

  Any help is greatly appreciated.

  Ry ~.

  Hi dude

  Skype works fine. Right?

  This means that the laptop is connected properly to the router and the internet connection has been established successfully.
  I think that a firewall can affect the functionality of the browser. Check the firewall settings.

  In addition you should check if other installed 3rd party tools to affect the functionality of the browser.
  Verify installed tools

  last but not least you could clean the operating system. Use the CCleaner.
  Free is nice tools.

• How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect

  How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect)? I guess I have to be able to drop on my Google Cloud someway.

  Thanks, I'll do the application of inkjet Canon a try.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect. -Enable yes/no?

  When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect.   -Enable yes/no? When I click on Yes my screen go black and that's it. Nothing happens. I have windows xp professional. For PC refurbished

  Hi Blue85angel,

  ·         What is the number and the model of the computer?

  ·         You did changes to the computer before the show?

  See the following articles in the Microsoft Knowledge Base and check if that helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

   

  Blank page to activate Windows in the wizard of Windows Product Activation

  http://support.Microsoft.com/kb/314935

   

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

   

  You can also contact Activation of Microsoft technical support for assistance:

   

  Activation and registration of a Microsoft product

  http://support.Microsoft.com/kb/326851

  I hope this helps.

• When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

  How to get my Outlook Express to work

  When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

  Folders.dbx is probably damaged.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  The path to the message will be very similar to this:
   
  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
   
  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
   
  Note these possible side effects:
   
  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• I want to back up files and programs to an external 500 GB external hard drive with USB 2.0 connection. How can I do this?

  original title: Windows XP USB 2.0 HD backup

  I have a Dell Dimension 8100 2002 with 80 GB C and 200 GB drive F drive.  I want to back up files and programs to an external 500 GB external hard drive with USB 2.0 connection.  How can I do this?  Do I need special software to do this?  I have Windows XP Home Edition.  If I need additional software, what software recommend you?  Now I have My Documents, my pictures, etc. on F: and programs on C: any help and suggestions would be appreciated.

  Thank you, Bob Morrow

  You have a few choices.  You can buy a 3rd party program to backup such as Acronis True Image or Norton Ghostor you can install the program NTBackup comes with XP Home, but is not installed by default:

  'How to install backup from the CD-ROM in Windows XP Home Edition'
    <>http://support.Microsoft.com/kb/302894 >

  HTH,
  JW

• Windows mail in Vista restarts when I open a particular mail

  Windows mail in Vista restarts when I opened a particular email. How can I remove this e-mail?

  Turn off the preview pane. Click once on the header of message to highlight, then shift + delete.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• HTTPS with Wifi and 3G connections

  Hello

  I have a code to open a connection https using Connector.open ().

  I check for the MDS coverage and, if not true to add deviceside = false to the URL I check for BIS support and add deviceside = false and ConnectionType = mds public, otherwise I check to support DIRECT and add deviceside = true.

  It was everything works very well if you use a SIM card with BB internet services activated. Even though it was not a mobile connection but Wifi available it would connect via Wifi (that I found on other forums it seems to manage it's "free").

  However, I got a problem when you use an Orange SIM card with no active internet service. Even if there is Wifi available it wouldn't connect. I then added '= wifi interface' and 'deviceside = true' for the URL and it connects via Wifi.

  This is my code

  if( _mdsSupport ) {
              name = name.concat( ";deviceside=false" );
          } else if( _bisSupport ) {
              name = name.concat( ";deviceside=false;ConnectionType=mds public" );
          } else if (_directSupport) {
              name = name.concat( ";deviceside=true" );
          }
          else {
              name = name.concat( ";interface=wifi;deviceside=true" );
          }
  
          return Connector.open( name, mode, timeouts );
  

  My problem is that when I use a SIM card with no internet service at all or with the 3G, they both return with _directSupport (IE. CoverageInfo.COVERAGE_DIRECT is enough) but then none of them will ever connect if I have the network of mobile telephony, Wifi, or both.

  With the SIM card with no internet service I expected to return CoverageInfo.NONE and try and connect via Wifi.

  With the SIM with 3G, I expected him to come back with CoverageInfo.DIRECT but it does not connect successfully.

  Please can someone help explain this? I tried it on a Curve 8900 and the Torch 9800.

  Thanks for any help.

  Hi Peter,.

  I managed to get all this work on Friday. Thanks for your other thread with information on making connections. Between your phone and the demo app he began finally to all the senses. Still do not know why this is all handled by the API!

  I have test to try, and then sign in using BES and BIS, then Wifi, WAP and finally direct TCP, but you're right that I have need information about AFN to define.

  Thanks again for your help. Your son has been invaluable.

• BlackBerry smartphone how to use my Verizon Storm 9530 with my laptop to connect to Internet?

  I have a Verizon Storm 9530 and subscribe to the $30 data plan that allows me to connect to the Internet from the device.  I also read that the device can also be used as a modem with a laptop to connect to Internet.  I don't understand this.  How does this work?  Is the work of mobile phone as a dial-up modem?  Or just connect my ISP (Time Warner Cable)?  I use a connection broadband at home, but it does not help when I am away from my home.

  Can someone please explain how to use the 9530 with my Dell Notebook PC to connect to the Internet?

  How does it work?

  What hardware do I need?

  What software do I need?

  How do I put in place?

  Do I need to purchase any additional VZN service?

  Do I need VZ access?

  Please explain in detail.  Thank you.

  melburstein wrote:

  I have a Verizon Storm 9530 and subscribe to the $30 data plan that allows me to connect to the Internet from the device.  I also read that the device can also be used as a modem with a laptop to connect to Internet.  I don't understand this.  How does this work?  Is the work of mobile phone as a dial-up modem?  Or just connect my ISP (Time Warner Cable)?  I use a connection broadband at home, but it does not help when I am away from my home.

  Can someone please explain how to use the 9530 with my Dell Notebook PC to connect to the Internet?

  How does it work?

  What hardware do I need?

  What software do I need?

  How do I put in place?

  Do I need to purchase any additional VZN service?

  Do I need VZ access?

  Please explain in detail.  Thank you.

  1 attach. you your storm to the computer via usb.

  2. a computer, your usb cable and the storm

  3. you need to download vz access manager from verizon

  4. install vz access, connect the storm and on net

  5. Yes, its about $30 extra for tethering

  6. Yes, see #3

• AnyConnect with several profiles of connection and menu drop-down

  Hello world

  I configured anyconnect with two profiles of connection and group policies.

  Connection profiles and group policy have the same host name say xyz.com.

  need to know which configuration should I do so that when I connect it should show

  under option group choose the connection profile from the menu drop-down?

  Concerning

  Mahesh

  Mahesh,

  When you build the connection on the SAA profile there is a section in the Advanced section of "group Alias/group URL. Complete on the names you want and enable them. You should then see the two selections on the AnyConnect profile drop-down list.

  In the cli, it looks something like:

  tunnel-group Group1 webvpn-attributes
  enable-alias group Group1

  tunnel-group group2 webvpn-attributes
  Group-alias group2 enable