NB200 beep low battery

Hi all

When my battery level reaches 10%, my NB200 is one short beep; about once every 20 seconds or more.

As the battery life is so good on the NB200 (which means I have about an hour of use at 10% left), I'll have to listen to the sound signal for awhile.

Anyway for this turn off? I looked in the Windows audio settings and in the BIOS, but I can't seem to find an option to turn off the sound.

I hope that someone else experienced this and has found the solution.

Thank you very much.

Select this option.

Hello Mark

You can change this value in the advanced power settings.

Control Panel > power options > change Plan (on profile you use with battery power) > change advanced power settings > battery > battery low level.

I hope this helps.

Tags: Toshiba

Similar Questions

  • How can I turn off the beep low battery?

    I just bought a laptop of HP ENVY m6.  It is running Windows 8.  I want to know how to disable the beep low battery.  It was not a problem until last night when my battery started to beep before going to bed.  I just close the lid and the beep stopped so I went to sleep.  Then to 4:am, he started a beep again.  I don't know if my computer has made himself, to do an update but not any reason, I would have preferred for the battery to die rather than wake me up in the middle of the night.

    It is also just a beep really FORT that scares my younger child whenever it starts.  It's like a race to find the power cord so that it can stop.  I'd rather just a prompt to come on my screen and tell me that I have 10% battery life left.

    Thanks in advance.

    When you click on the link in my previous post, the download should start automatically.

    • Google Chrome users will see falling immediately into the bar of downloads at the bottom of the screen when you click.
    • Internet Explorer users will see the box "do you want to run or save...". "at the bottom of the screen when you click.
    • Mozilla Firefox users will get a box "do you want to save this file.

    If for any reason that does not come to the top, you can also get it on this page. This page has a number of listed product and I know that everyone is not the 1184 this but it's the same BIOS version.

    Pages of the product all the pilot the aura.

    Click here to go to support and drivers Page

    1. Find the number for your product by pressing FN + ESC
    2. Enter it in the 'Product search' field and click on Go
    3. Click on your model in the results (1 match)
    4. Select Windows 8, and then click Next
    5. Expand the BIOS
    6. Click the update HP Notebook System BIOS F.34 Version
    7. Click on the Orange download button
    8. Run the file. IMPORTANT: Your laptop will reboot on its own during the installation. Enable restart and return to the start screen
    9. When it's convenient for you, let your battery run down and let me know if you encounter the beep.

    Thank you all!

  • E320 - how to disable the beep "low battery"?

    Hello

    I have an E320 and I'm generally pretty happy.

    However: This beep that goes on whenever the akku reached that the critical level (10% by default) is really too strong and too often. Is there a way to disable it?

    Now, I'm always afraid it lights if I have it in a meeting more or less.

    At least, it should be an OPTION to turn it off! has tried all, silent, all Win7 sounds off the coast but it still beeps! And strong! Woke up at 04:00, strange looks like a meeting, which is really annoying!

    I read in the other advice that updates bios fixed or not this issue but regarding the E320 EDGE series saw nothing.

    Anyone else has this problem or found a solution?

    Thank you!

    one last thing, you can check...

    Open your Control Panel sound and check what, if anything, is assigned to the low battery alarm critical battery alarm and on the sounds tab and modify as desired.

    HTH.

  • Re: No beep low battery on Satellite A200-1CR

    Hello
    I did format my A200-1CR (PSAE0) Satellite with my vista cd, not the restore cd.
    The reason was that toshiba had too many things - drivers, programs - which my pc required 3 min to open and to close 3. After the new installation is really good, I've never seen if quickly, most of the drivers have been recognized by vista, so I installed only 1 or two. I Don t need anything else, but I have a serious problem:

    There is no beep battery low so laptop shut suddenly setting in bios and windows setting are ok. Does anyone know what driver should I install so that this problem is solved?

    Thank you in advance...

    Seems to be a normal behavior and control it, I know it s a BIOS beep.

  • Beep low battery Y550P

    Hello

    Whenever my Y550P battery falls to 10%, obnoxiously loud beep goes off every 10 seconds until I plug it in or turn off the computer. I understand that this is happening to warn that your battery is low, but Windows does a pretty good job to that. I use my laptop in class and I don't want to worry about beep loud go to offshore.

    So, I listened carefully, and it seems that the beep comes from the battery itself. Is there a way I could open the battery and turn it off physically if it comes from the battery?

    The unique features should be able to be disabled; especially when there is no mention of a beep in the product description.


  • Beep low battery FORT on laptops Envy M6

    everyone complaining about what will be doe hp to help us! We're students and we cannot bring our laptop at school because of this horrible noise that I try to talk to a technician of hp and he told me to go to the sound setting or on the battery works nothing do something! pls I will definitely return this laptop

     

     

    BIOS F.34 has arrived!

    If please download and install it here and let me know the results when you get a chance!

    Main thread

  • Satellite T230 low battery beep - how OFF turin?

    Hello

    the sound continues beep less than 10% of autonomy. It s not in relation to Windows 7 home pro. Even with the Windows sound events off it keeps beeping. In power options, with turned battery notification low and critical it keeps beeping. Only muted support. It must be connected with some software from Toshiba, anyone know how to disable? Please help me, it s so annoying!

    Post edited by: lefti696

    Hey Buddy,

    I'm not quite sure, but AFAIK this low battery beep could be also caused by the BIOS

    If I remember well in the BIOS there is an option called beep, beep PC or similar and you should disable this option. That means the computer won't no beep sounds.

    You can confirm s work?

  • Alarm low battery on the Satellite A100-451

    Hello

    I have a Sat A100-451 running Vista

    Is there a way to set an alarm to the low battery level is 5%?

    I looked in the power settings in the control panel a has nothing. Did I miss something?

    Thank you

    K

    Hello

    I s Don t think possible. It will give you a message if the battery goes empty, but with this "beep" you have no chance.

    I looked on my machine, I have a qosmio with Vista, but the powermanagers are similar. And I couldn t find anything.
    Sorry man

    Welcome them

  • Satellite L40-139 - possible to disable the low battery alarm?

    I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

    Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

    I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

    I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

    Any ideas?

    Hello

    Please check the BIOS settings.
    To access the BIOS F2 press Mobile start upward.
    There should be an option called something like low battery alarm
    Remember to save the changes before exiting the BIOS.

  • How to adjust the power of the low-battery warning sounds options?

    Original title: WHEN the RECHARGE PORTABLE IT beeps AND I can't do it; HOW can ME to the MUSIC, I turn OFF THE BEEP?

    OK SO WHEN MY DOUGH IS LOW, I THE BRANCH AND IT SOUNDS REALLY LOUD, I LISTEN TO MUSIC OR WATCH VIDEOS SOUND RS FORT BC AND A BIT BORING! HELP PLZ

    Hello

    Here are several methods.

    Double click on the speaker near right lower clock - mix - MUTE Windows sounds or lower the slider
    all the way.

    Control Panel - Power Options - click on change Plan settings for the offender to power you use and want
    Change - change Advanced Power Options - battery - defined as you wish.

    Control Panel - sounds - warning of low battery - you can set that None
    Also check the critical battery alarm

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Low battery - red lines on screen

    I got a brand new iPhone6 (2 days) on the Apple Store. Everything works fine; However, when the battery is dead instead of the low battery message (empty battery with the CAP) popping up on the screen looks distorted with red, black and yellow lines. For me there is a bigger problem here. Help, please.

    mmmh2926 wrote:

    ... when the battery is dead...

    Do not let not your battery close to being "dead."

  • fully charged iphone 5 c goes down, low battery will appear

    My two year iphone, 5 c (version 5.3) keeps crashing and showing the screen low battery even if it is fully charged. Then it becomes unresponsive until the phone is plugged into the charger. It will load once connected, but any application that I use it will crash once I have unplug the unit. I can't even recalibrate the battery because it will crash at 90%, 77% etc before I can completely drain the battery. It has been like this for more than a week. Quite annoying when it happens during important calls.

    I deleted the apps I used in each accident. I made a simple reboot and a forced restart. I even reset all settings and none of it worked. Today, I downloaded the 9.3.1 update ios hoping he can solve this problem, but no luck. Is it a hardware problem or software? My phone is out of warranty, so I would really any help that might prevent me from having to go to the apple store.

    You can try the recovery mode. If your problem is software partner, who will most likely fix it. If not, try again, but set your phone as new. If the recovery mode does not solve your problem, you can try the DFU mode. If none of them work for you, it is probably a hardware problem.

  • TouchSmart 600: Low battery for the keyboard will not disappear

    After upgrade to windows 10 in PC all-in-one TouchSmart 600; whenever the PC wakes up from sleep mode, low battery for the keyboard warning message appears despite the fact that the batteries are new.   The message 'form' has no way of closing other that "remind me later".

    Solution: new keyboard, Logitech > bought.  Must say that I was so tired of the current fake e-mail I just replaced my HP keyboard and mouse with another third-party.  Thanks for all those who have responded or tried to help.

  • How to SEND an emergency call with low battery

    Is THIS POSSIBLE? Yes? How?

    iPhone 4 s - ios 9.2

    You need to explain what "low battery" means.

  • HP Pavilion notebook15-ab035ax: computer HP Pavilion 15 laptop turns off suddenly on low battery

    I bought my hp laptop Pavilion in India. Now, I live in England. For the last month or two, I have problems with my laptop. Whenever the laptop is on battery power, it does very quickly. It randomly stops (no stops, just turned off with a gut wrenching tinkling of the hard drive) at any time under load of 50%. no notification of low battery or go into hibernation. It can happen in the middle of typing a sentence or you to browse.

    I ran the diagnostic. Software battery check HP first showed a result of "low battery." I was about to order a new battery, when I ran the software once again, who now says "main battery OK.

    It's very confusing, because even if we agree that the battery has developed a problem, I do not understand why the system is not detect low battery or putting the computer to Hibernate, depending on settings. I checked the drivers - updated.

    The laptop is just a year and 3-4 months.

    Should I replace the battery? Or is it a software error in the new upgrade of windows 10?

    Any help will be appreciated.

    Thank you!

    Hi@drsunny,

    Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

    For the best experience on HP forum, see our Guide to HP Forums to learn more.

    Questions on the PC to charge the battery. Is this fair?

    Thank you for sharing the details of the problem. I want to help you.

    I recommend that you try to perform the diagnostic tests for the battery and check if that is any hardware problem. Use the link below to perform the diagnostics.

    http://HP.care/2eiMy8z

    I hope this helps. Let me know to learn more.

    Happy announcement.

    Resolv_S

    Happy to help you. I work for HP

    Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
    Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

Maybe you are looking for

  • same circuit design-different versions of multisim now fixed

    again the circuit model 74LS244N, now the pattern16t file works in different versions of multisim. How do you pattern16t signs might be useful. This circuit is interfaced with gpib, scsi, usb computer interface circuits. It's everything. software mus

  • Windows XP Home Edition SP3 (error: files which are required for Windows to run properly have been replaced by unrecognized versions)

    I get this message: files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.  Insert Win XP SP3.  Please help - I can't

  • missing data

    I was impatient and didn't wait for help when I had problems with my computer stops and restarts repeatedly. (mad made antivirus software) I did a restore of file that could save my files but reset to original settings. I have found all my photos and

  • Do to restore Windows 7 from a HP computer to another HP computer?

    Sorry for my bad English. Hello I bought the HP Pro 3400 MTwith a family license Windows 7 Edition Basic 64-bit OEM My friend bought the same exact computer (= on my recommendation by the way), the store had big discounts) The hard drive is an area H

  • How to disable Smartview in Outlook 2010

    HelloFirst time poster here, hope you guys can help out me. I am currently working on the deployment of Smartview in our environment. Clients access smartview to a Citrix connection, here are the details of our environment:Citrix server: Windows Serv