Re: No beep low battery on Satellite A200-1CR

Similar Questions

• Difference between 6 and 9 cell battery for Satellite A200-1CR

  Hello again... I have to purchase a new battery for my A200-1cr

  I found 2 batteries with different characteristics...

  a. 6-cell and 10, 8v x 4000maH
  b. 9-cell and 10.8 x 6000maH

  and the second a costss $ 35 Prime more...

  I would like to know if the other costs money... will I see a difference?
  For example if with the fisrt one my laptop works for two hours, it can with the second work for three hours (do the same things)

  I just want to know the differences in their perfomances...

  The battery 9 cells is of about 1/3 stronger than the battery 6 cells and therefore it needs hard 1/3 longer than the battery 6 cells.

  It s you the decision whether you want to spend $ 35 more for this battery

• Question of the use of battery on Satellite A200-1CR

  Hello again...

  you have helped me many times, and I think once more... I did a search, but for the batteries, there is a mess...

  I would like to know if toshiba recomments one way to fill and drain the battery so it holds in addition, with the passing years.
  In the first battery I fill and complete emptying, 5 - 6 times a week and laptop was on the adapter time to rest...
  But is it possible to use the battery and power adapter armonically without destroying the time the battery is holding its...

  What should I do?
  Keep it always on the power adapter?
  The battery full and empty about?

  What I have now is that I can't put it in a closet... then I have to throw it away...
  What do you think?

  Sorry for my English...

  Hello

  First to know that all batteries are covered under warranty for 12 months (one year) and more early any more later all batteries should be replaced because after a long period of use of each battery will discharge performance.

  Well, you want to know how to manage the battery?
  To be honest I have 3 laptops, and I never removed the battery if the power adapter is plugged.
  But if you want, you can use the laptop without the battery if the AC adapter is plugged in but there is a risk that the laptop would be power off if you disconnect the cable accidentally.

  However, the new generation of battery is more stable than the first batteries for laptops and in general it of not necessary to remove it when the AC is plugged.
  In my opinion it should not affect the performance of the battery.

  See you soon

• How can I turn off the beep low battery?

  I just bought a laptop of HP ENVY m6.  It is running Windows 8.  I want to know how to disable the beep low battery.  It was not a problem until last night when my battery started to beep before going to bed.  I just close the lid and the beep stopped so I went to sleep.  Then to 4:am, he started a beep again.  I don't know if my computer has made himself, to do an update but not any reason, I would have preferred for the battery to die rather than wake me up in the middle of the night.

  It is also just a beep really FORT that scares my younger child whenever it starts.  It's like a race to find the power cord so that it can stop.  I'd rather just a prompt to come on my screen and tell me that I have 10% battery life left.

  Thanks in advance.

  When you click on the link in my previous post, the download should start automatically.

  • Google Chrome users will see falling immediately into the bar of downloads at the bottom of the screen when you click.
  • Internet Explorer users will see the box "do you want to run or save...". "at the bottom of the screen when you click.
  • Mozilla Firefox users will get a box "do you want to save this file.

  If for any reason that does not come to the top, you can also get it on this page. This page has a number of listed product and I know that everyone is not the 1184 this but it's the same BIOS version.

  Pages of the product all the pilot the aura.

  Click here to go to support and drivers Page

  1. Find the number for your product by pressing FN + ESC
  2. Enter it in the 'Product search' field and click on Go
  3. Click on your model in the results (1 match)
  4. Select Windows 8, and then click Next
  5. Expand the BIOS
  6. Click the update HP Notebook System BIOS F.34 Version
  7. Click on the Orange download button
  8. Run the file. IMPORTANT: Your laptop will reboot on its own during the installation. Enable restart and return to the start screen
  9. When it's convenient for you, let your battery run down and let me know if you encounter the beep.

  Thank you all!

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite A200-1cr - two questions about the AC adapter / CC

  Hello guys,.

  I am owner of a laptop Toshiba Satellite A200-1cr and suddenly one morning, I can not charge my battery...

  I tried with another adapter that I bought for another laptop a few years ago and it worked perfectly...

  I have change the power supply cable before the adapter, that we... http://www.digitalkind.co.uk/INU_Products/INU_ProdDetailsL8.ASP?ref=57306972
  and nothing has changed, I realized that I need a new ac adapt power...

  It's for my laptop... http://toshiba.icecat.biz/en/p/PA3290E-3AC3/AC%2520Adapter%2520120W.htm

  But now I have two important questions...

  1. since I tried, the power adapter works fine, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same features...

  2. is the replacement of the power supply covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...

  Thanks in advance and sorry for my English...

  > 1. As I've tried, the power adapter works well, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same characteristics

  If the AC adapter doesn't supports exactly the same specifications as the original Toshiba AC adapter so I wouldn't recommend using it! This could damage the motherboard! So if you want to use it you must make sure that the ampere, Volt and Watt values are the same!

  > 2. The replacement of the power supply is covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...

  The AC adapter belongs to the laptop and it s covered by the warranty also.
  So if you warranty is still valid, don t waste time and contact the ASP in your country!
  Explain what s bad guys and I m sure will be able to help. The adapter must be replaced if it s defective!

  In this case, I would not recommend using 3rd party adapters if you will get a new ASP.

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Is recovery DVDs the only disc with Satellite A200-1CR

  I wonder if I had all the discs with my laptop Satellite A200-1CR, because I can't make heads or tails of the files on the recovery DVDs. Where are all the programs that I should get with the computer., and I had everything installed from the beginning. I want to reinstall windows, but I am concerned if I have all the programs like: winDVD and Norton Security and all the driver.
  Thank you!

  Hello

  The Toshiba Recovery DVD is only one of the disks that came with your laptop.
  On this DVD, you'll find a Toshiba recovery image that contains the operating system Windows, drivers, tools and additional software.
  If you want to redefine the laptop to factory settings then just boot from the recovery disc and the installation will begin.
  But note; the recovery DVDs will format the drive so HARD integer if necessary backup data.

  Other programs like Win DVD or Norton Security are OEM versions and, therefore, are only on the Toshiba Recovery DVD. It of not possible to download it!

• Satellite A200 - 1CR PSAE0E DVD disc does not apper in workstation

  I am the owner of the computer laptop above Satellite A200-1CR PSAE0E-02G00YA
  RAND, I have problems with my DVD - RW DRIVE.

  I can't see under my computer.
  I am running Windows Vista and need a driver updated that I can't find anywhere.

  Please help as soon as possible... Thank you

  Hello

  Try this short workaround:
  -Go to Device Manager and remove right CD / / DVD drive from the list of devices
  -Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Now after the laptop has rebooted, the OS should reinstall the STRANGE and the STRANGE should appear in my computer.

  Welcome them
  Jack

• Technical need info on satellite A200-1CR

  Hello!

  I have a laptop Satellite A200-1CR. I can't find any technical info on the toshiba homepage.
  I registered my laptop, when I click on properties of my notbook, become after messsage:
  "I'm sorry, but this product is not available in your region."

  I can't find it in the A200 list too. (over 15 models without my 1CR)
  My problem is that I don't know the settings of my laptop. I didn't ' know how can I upgrade without this info. For example, chipset, cpu, max FSB socket, etc.
  Can someone help me?

  Don't work on my laptop or not product online Information Service.
  Any suggestion?

  Thank you very much!

  I find a Toshiba brochure that provides many useful information on your laptop:
  http://EU.computers.Toshiba-Europe.com/contents/Toshiba_teg/EU/others/brochures/April07/en-DB_NB_ProductGuide_Apr07_low.PDF

  In addition, you might find a lot of useful information in the manual of the user which is preinstalled on your laptop. Should check out!

  A tip;
  You want to find information on your hardware specifications, try to install a tool like Everest home for hardware diagnosis.

• Satellite A200-1CR - cannot find my BIOS

  Hello

  I have a Satellite A200-1CR (part number: PSAE0E-02G00YAR) and I can not find my BIOS. I need to make a crysis recovery disk as I interbted the update of the BIOS. Any help to find the file please?

  And observations about crysis recovery thing is more than welcome :D

  Thanks in advance everyone

  Hi iq860,

  Official website of Toshiba, you can download the latest version of the BIOS, but you can find it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Satellite A200 is a little more if you can find it in * Archives *:
  * Archive * > Satellite > Satellite a series > Satellite A200

  I hope that helps! :)

• Keyboard broken on Satellite A200 - 1CR PSAE0E

  Hello

  I have this laptop:
  Model name: Toshiba Satellite A200-1CR PSAE0E-02G012G3

  The keyboard is broken (of and <1>key).
  Can I replace it?

  I want to buy a new keyboard.

  Ovidiu

  Hello

  This is possible. If you want to buy and replace the keyboard please contact the service provider authorized in your country.

  The nearest ASP, you will find here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  Good luck

• Audio input does not not on my Satellite A200 - 1CR WXP SP2

  Hello

  My laptop is Satellite A200-1CR. Earlier I changed my Vista laptop to Windows XP SP2 home edition, but I have a problem. My audio does not.

  Realtek HD Audio input and output driver is there but does not
  Upcoming audio output.
  But not a supported Audio input.
  Please someone help and replay quickly for me.
  I'll wait for your replay.

  Thank you.
  Arul.A

  Hello!

  I just wanted to share a few experiences. When I shot down my system to Windows XP edition family of pre-installed Vista (Satellite A100) I went to the support section of the official site of Toshiba and downloaded all available for my laptop to XP. And everything has been working fine until now. Oh, I think this chipset driver I got from the Intel site.

  Maybe try to re - install some components like chipset driver (as the audio is embedded)?

  Good luck!

• Satellite A200-1CR: can I install Vista using my Vista DVD installations?

  Hello

  I would like to get some answers to my questions...

  I have the satellite A200-1CR (PSAE0) and I want to install vista on my own... not with the recovery DVD but I have some serious questions...

  (1) may I have problems during the installation... (Drivers SATA, etc.), problems of BIOS or Toshiba has no restrictions?

  (2) what problem if I erase the secret (winre) partition and what is its purpose?

  (3) if I do a clean install with my DVD with my vista... If I want in a future close that I can use the recovery DVDs I got it or not?

  (4) to the drivers section for my laptop for each part has 5,6,7 or 8 drivers for win vista... which is good, or it's all the same?

  (5) in general, what do you propose? Are there reasons why not to do my format? I did a large number of formats in desktop, but never in the notebooks.

  Sorry if you tired with my questions and sometimes my bad English...
  Thank you in advance...

  Why not.

  As to the question;

  (1) possibly the Vista operating system does not recognize the HARD drive during the installation of the OS. In this case you must install storage Intel Matrix (Robson package) Manager first! It of a driver SATA and can be found on the Toshiba or Intel driver page.

  (2) Windows recovery environment (WinRE) is placed on the hidden partition and it of necessary to restore a damaged operating system.
  The Vista operating system automatically creates the hidden partition and Windows re installing the OS.

  (3) Yes, you can use the Toshiba Recovery CD. But it erases the entire HARD drive always.

  (4) take a newer version

  (5) generally I put t see any reasons to get in shape. The preinstalled Vista operating system has been configured and all the tools of Toshiba, drivers and additional software should work very well.
  I don't recommend a new format if the operating system is working well.

  Good bye

• Satellite A200-1CR: I'd like to expand my RAM to 2 GB or 3 GB memory

  Hello.

  I have toshiba satellite a200-1cr. I'd like to expand my ram up to 2 or maybe 3 GB.

  Can anyone tell me what kind of ram I should buy, type, etc...?
  Also I don't know if I have 2 x 512 MB or 1 GB.

  I have a free slot or I have to remove one of my 512 ram?

  Thank you
  PS: I can't find my model in the toshiba Web site more... (model. psae0e No.)

  After a long investigation and after visiting various websites I found the info that this laptop was equipped with 2 x 512 MB DDR2 (667 MHz) modules

  So if you want to upgrade the RAM you can use 512 MB, 1 GB, or 2 GB modules.

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=30728&ft=m&St=3