NB200 running Windows XP - what is wrong with my USB ports?

Similar Questions

• When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  {Assuming the rundll32.exe file is not found}

  See if them can restore the file rundll32.exe:
  http://support.Microsoft.com/kb/812340 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I installed ux 16 driver Windows 7 my pc but nothing displays, no .so tracks what is wrong with it please suggest.or how can I do this by using midi for the first time.

  I installed driver ux 16 in my widows 7 and connected to my pc but nothing displays, no .so tracks what is wrong with it please suggest.or how can I do this by using midi for the first time.

  In the subject line, type a brief description of your problem or your question. A subject line that says only "Hi alll" not will receive the attention of someone who can be familiar with your particular situation.

  Contact the support of Yamaha.

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• I don't know how to fix my sound, or what is wrong with it

  help me to solve this problem, please.  I do not know how and what's wrong with it?  He was slowly.
  Thank you
  Original title: his record game

  Hi MarthaWatson,

  Follow the troubleshooting steps in this thread to solve most common sound problems.

  Let us know if that helps.

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• What's wrong with my syntax?

  I get an error with it. What's wrong with my syntax?

  Error: Scene 1, Layer 'actions', image1, line 21 1084: Syntax error: expecting rightparen before semicolon.

  Line 21

  Holder.Load (new URLRequest ("Interactive_StrategyMap.swf"+"? random =" + Math.random () ;));))

  You must get rid of this semicolon just siiting after Math.Random () leave that only at the end.

• Rounded corners code - what is wrong with my code?

  Hello

  I'm trying to use Win DW5 and CSS3 for rounded corners of the boxes (only at the top left and top right rounded - down should be square) in pure CSS3.

  Can someone tell me what is wrong with my code below?  (Top of page code makes 4 corners roudned and background code doesn't appear to upper right corner rounded - and not the left one.

  < div style = "padding: 10px;" Width: 445px; height: 370px; border-radius: 10px; -o-border-radius: 10px; -icab-border-radius: 10px; -khtml-border-radius: 10px; -moz-border-radius: 10px; -webkit-border-radius: 10px; background-color: #d1ddf7; border: 1px solid #000; ">

  < / div >

  < p > < / p >

  "< div style =" width: 445px; height: 370px;

  border-radius:

  -webkit-border-top-left-radius: 10px;

  -webkit-border-top-right-radius: 10px;

  -moz-border-radius-topleft: 10px;

  -moz-border-radius-topright: 10px;

  background-color: #d1ddf7; border: 1px solid #000; ">

  < / div >

  "Thx. for any help.

  Jane

  Take a look at this:

  http://www.CSS3.info/preview/rounded-border/

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web-design.blogspot.com/

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• HP Thin Client running Windows Embedded don't profile with attributes DHCP

  My company has a large population of HP Thin Clients that are not attached to our AD domain and therefore cannot do dot1x because they have no certificates.

  We decided to do the profiling for these devices. We present a few attributes, two of these DHCP attributes.

  About 90% of our profile of thin clients, as expected, but the other 10% will refuse to work. We need to statically assign them to a group of identity to authenticate properly.

  A lot of troubleshooting reduced us to query DHCP the thin client sent was not received by the strategy node. A TAC engineer looked over the config switch, IP helper address configuration and said that everything seems to be configured correctly.

  The only explanation is that it seems that these specific thin clients were not finishing the DHCP process before reassigned switch the VLAN of the port. So when the dhcp request has been sent, the thin client was already in our vlan "invited" who does not dhcp to the ISE.

  It's very strange, because we have so many thin clients that works properly. It's only a handful that do not. We have not been able to further refine to something specific. They are running Windows Embedded Standard 7 and a majority of them are HP t5740. I don't see Windows or HP updates available for these units and not sure if there are any registry hacks available to expedite the DHCP process.

  Has anyone ever come across something similar to this?

  It's pretty obvious to me, the end point isn't you get profiled before there was authenticted, which means that you do not correspond to the profiling conditions defined in rules 6 and 7, which means it will match the rule 11 (I think, having not seen your real rules). What I expected this, is that endpoint gets profiled, if ISE receives the attributes of this endpoint via dhcp e.g. forwarding help. Then, what should happen is, that it should issue a certificate of authenticity to the switch, which will lead to the passage to be re - authenticate this ending point, which now must have customization attributes you are trying to match. However if the DHCP packet never reaches ise, it won't work. That's why I think you should do a trace of package on the ise server, to see if the packets actually reach ise. If they don't you will probably need to find another way to profile, or activate dhcp for assistance on your guest virtual local network. Have you looked at the attributes of endpoint maybe after 30 seconds? They change?

• BlackBerry smartphones, what's wrong with my Blackberry Bold 9930

  First the screen of my Blackberry would freeze upwards and it wouldn't let me do anything for a few minutes, so I had to take my battery out and then after that I took out my battery and put back in place he would have himself cut and wouldn't load, it would load at halfway then stop and try again. I use to have to take out the battery for a few days before its in so that he can turn it on but one day it does at all so I thought it was the battery but I just bought a new battery and its charging again to half way and stop and then try to load again, but it won't turn. Does anyone know what the problem with it... I have to wait a few days before you put the new battery in once again and then it will work or is the phone itself and I just need to get a new one?  Help, please.

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem. I realize that you have purchased a new battery, but please understand that 'new' and 'well known' are not necessarily the same thing... While it's rare, that a new battery cannot be subject to default. The best thing to do is to find someone with an identical BB which has no problem... to Exchange batteries and see what happens.

  In addition, the next thing is to try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, thinking... what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  Otherwise, your next steps become much more radical.

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry
  • www.BBSAK.org

  Good luck and let us know!

• What is wrong with that variable binding.

  I get a bad bind variable error. I don't know what is wrong here.

  FUNCTION DisturbrLoops(i_currTerm IN NUMBER,
                            i_Termoutofloop IN Merc.T_NUMLIST,
                            i_currentTermonloop IN Merc.T_NUMLIST)  
                            RETURN NUMBER is
  v_sql        VARCHAR2(1000);
  cntLoops NUMBER;
  BEGIN
  
    BEGIN
     
    
    select count(distinct assoc1.loopid)
        from ndw_segment                  ns1,
           ndw_loop_segment_association assoc1,
           ndw_loop_segment_association assoc2,
           ndw_segment                  ns2
      where ns1.termsysid = :i_currTerm
       and ns1.segment_id = assoc1.segment_id          
       and assoc1.loopid = assoc2.loopid
       and assoc2.segment_id = ns2.segment_id
       and ns2.termsysid in
           (SELECT * FROM TABLE(CAST(:i_Termoutofloop AS Merc.T_NUMLIST)))
       and ns2.termsysid NOT in /*(1,2,3,4)*/
          (SELECT *
              FROM TABLE(CAST(:i_currentTermonloop AS Merc.T_NUMLIST)));
             
             
              
                   
      EXECUTE IMMEDIATE v_sql
              BULK COLLECT INTO cntLoops  
              USING i_currTerm ,i_Termoutofloop ,i_currentTermonloop;
    
  /*  dbms_output.put_line(v_Termoutofloop.count);*/
    
    EXCEPTION
      WHEN OTHERS THEN
       -- catch all errors. what to do. 
       dbms_output.put_line( SQLERRM || ' ' || SQLCODE);
          
      null;
       
    END;
  return cntLoops ;
  
  
  END DisturbrLoops

  Published by: user8798946 on September 14, 2009 01:45

  (1) remove the hider exception (Manager)
  (2) v_sql is null, then the immediate execution attempts to execute NULL...