Necessary Advisor on the Workstation upgrade

Similar Questions

• You want to upgrade Windows Vista to Windows 7 Professional. I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional?

  I want to install Windows 7 Professional.  I ran the Windows Upgrade Advisor, and he told me that I can upgrade to Windows 7 Home Premium and Ultimate. Why not professional? Or is this correct?

  You can still install Windows 7 Pro, but it requires a custom installation. This will remove all your programs (you will need to reinstall them), but you can save your files and settings to external storage before doing so.

  If you want to make a place in the upgrade you will need Home Premium or Ultimate.

  How to install Windows 7:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  What Upgrade Options are available for Windows 7?
  If you are running Windows Vista , in some cases you can proceed directly to Windows 7, and in other cases, you must perform a custom installation. The following table shows what editions of Windows Vista can be upgraded to Windows 7.

  Windows Vista Home Basic	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Edition Home Premium	Windows 7 Home Premium, Windows 7 Ultimate
  Windows Vista Business	Windows 7 Professional, Windows 7 Ultimate
  Windows Vista Ultimate Edition	Windows 7 Ultimate

  For more information, see upgrading from Windows Vista to Windows 7 . (http://windows.microsoft.com/upgrade-windows-vista )
  You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
  If you have any general questions about reinstalling Windows , please see this site:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• Help, windows 7 upgrade advisor requires the removal of the player engine.

  Help, windows 7 upgrade advisor requires the removal of the player engine. I removed the Rhapsody, but it is still asking deletion. NOTHING I can find in my computer associated to Real Player. So please don't tell me no "Uninstall" that there is no evidence in the Uninstall list. Unless it is somewhere else. So, how can I continue my effort to upgrade to Windows 7? I tried twice already and he goes all the way to the end and then says installation failed and he returned to Vista. I have Vista Home Premium.

  Hello

  I suggest you to follow a few troubleshooting steps to solve the problem on your computer.

  Method:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-in/Windows-Vista/delete-files-using-disk-cleanup

  If it still asks the suppression of Rhapsody then I suggest you to contact forums Real player for further assistance.

  Hope this information helps you.

• It is necessary for taking the image of windows 7 upgrade windows 10?

  I want to ask is it necessary for the filming of system windows 7 if there is not all the files in the computer. (As no document)

  Can be installed by the dvd of windows 7 then it is necessary to make the image of the system?

  If something goes wrong while the upgrade to windows 10 can then I installed windows 7 on dvd or not

  Is not necessary.

  See also: http://answers.microsoft.com/en-us/windows/forum/windows_10-win_upgrade/windows-10/bdef4f4b-eb93-453b-9efc-f7f558cc9928

  FAQ for Windows 10-

  https://www.Microsoft.com/en-AU/Windows/Windows-10-FAQ

  If something is wrong you can reformat and reinstall Windows 7 DVD and run all the updates, but would it not easier to make an image of the system? Your choice.

• The ROMMON upgrade is necessary when upgrading ios in ASR1K

  Hi everyone can answer this question for me? Thanks in advance

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  I'd do it.

  My logic is very simple: the IOS update requires a reboot, Yes?  The ROMmon update requires a restart.  So why not upgrade the IOS and ROMmon in a remake?

  I see really no operational reason DO NOT upgrade the ROMmon.  It must, in all cases I've seen, 20 seconds to upgrade the ROMmon.

• After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  Found the answer:

  Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.

  installed above and it works now

  Blessings

• "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors."

  Hello

  I had created an executable in LabVIEW 8.6 on a PC windows XP 32-bit. The application uses some screws of Vision. The executable is running in most of the PC except one. the PC is a windows 7 64 bit. I first got the error "Labview support 3 error code: could not load front". "" I fixed this by changing the settings of the source file in the application builder. Now I get the error message "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors"and the exe displays a run button broken.»

  But if I build the exe in the same PC I get no error and it works very well. Moreover, I tested this exe in another PC with the same configuration, it works. I tried to reinstall labview in the PC, the problem persists.

  Hi Nitrox,

  There is no official adapter for LabVIEW 8.6 in Windows 7. See link below.

  www.ni.com/LabVIEW/OS-support/

  Upgrade to SP1 LV2009 should solve your problem. We had this problem with another client and update SP1 LV2009 solved his problem and should solve your problem too. If you have a problem after the update let me know.

  Kind regards

  Christophe P

  Technical sales engineer

  National Instruments

• disabled the vista upgrade

  I want to know why I have to spend more money on an upgrade to Windows 7, when I spent I believe 200.00 with microsoft in end 08.My on an upgrade vista ultimate on an older laptop.i have two other computers at home that I bought two full win 7 ultimate copies when this operating system was first released in oct 09 microsoft site does not allow me to install the vista upgrade because it has been disabled.i the feeling that in the future if I create another computer or buy a laptop, I'll buy the version complete, because the updates for win 7 can have the same result then win 8 fate within a year or so.and probably in an all too short time

  Hello

  you have a post very confused as to what you ae trying to do

  you don't have to get windows 7; It's up to you whether you buy it or not

  and the upgrade of operating systems is different from the upgrade of the editions in a particular operation systyem

  and if you upgrading vista from one edition to another and the installed operating system vista had SP2 and upgrade does not, you uninstall SP2 upgrade then reinstall SP2

  ____________________________________________________________________________

  For info on windows 7:

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

• The CPU upgrade failed!

  I bought a workstation Z1 base model with the Intel CPU 2120. Remember to update, I later also bought a 3220 Intel processor, which has almost the same features and same chipset.

  When I installed the CPU and tried to boot my machine, I received the following:

  (1) light remained stable

  (2) no red LED shone, blinked or even doing a dance

  (3) five short beeps were issued, about one per second

  I watched the "HP Z1 maintenance" and Service of Guide (685888-002, LP), but this condition was not covered in the "Codes and diagnosis errors" section on p. 83

  Now, you also have a problem with conflicting information. The "HP Z1 Workstation data sheet" (http://h10010.www1.hp.com/wwpc/pscmisc/vac/us/product_pdfs/Z1_Datasheet.pdf), the list of 'Available processors' clearly indicates the i3-3220 under "processors available.  In fact, it's the datasheet, I used when you decide to upgrade my CPU.

  After the failure of the CPU upgrade, I did more research and found other data sheet (Document

  4AA3-9435EEE

  ( http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA3-9435EEE&doctype=data%20sheet&doclang=EN_G...) which is NOT State of the i3-3220 as a compatible CPU and, in fact, only listed two other Xeon processors as compatible.

  After replacing the CPU, my system is now back to normal, but the question (and my pocket) are bugging me. What has gone wrong? Did I waste my money on a HP data sheet?

  Yours sincerely,

  K!

  Flushed with success from the BIOS update, I tried to install the i3-3220 CPU again. I also upgraded my RAM 8 GB with no ECC Kingston HyperX sticks I had to hang out. Why not live dangerously, huh?

  Worked! The default display to 800 x 600 at initial startup. I went to the driver manager, said Windoze to update the driver, he said he was already up to date thank you much and demanded that I reload. When I rebooted, everything came pink!

  Problem solved!

  For Linux users who might come here, you will need to update your BIOS for a Linux compatible one. The list of available updates are here for on the RPM-based distributions:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5230510&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dwk_123577_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  It is a CLI utility, in that you can run, as I have said before, a distribution based on RPM or you can use a USB key as normal if you do install this size. If you're stuck with Windoze, the updates to the BIOS page is here:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5230510&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dwk_123048_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Read the Installation Instructions and do not hesitate to use HPQFlash. It works a treat.

  THANKS to Dave and Skylarking. After that I have this post, I'll mark it resolved and suggest that my husband buy me a Xeon processor + upgrade RAM for my birthday! Who knows, maybe I'll even take 32 GB!

  Smooches to you all,.

  KAZ

• After restart of the firmware upgrade

  Hi, I need to update the firmware on my controllers PS6100 EqualLogic.

  I found the instructions on how to do it and everything seems straight forward to do so via the GUI.

  I noticed there is a necessary restart after the firmware has been applied. Does this mean I have to gracefully shutdown the virtual machines running on my SAN LUNS? My iSCSI connections will be closed/broken during the restart of the post firmware upgrade?

  Thank you, Oliver.

  Hello Oliver,.

  In the same area download notes firmware and release is another PDF, entitled ' iSCSI initiator and optimize your SAN environment for high availability operating system considerations ", which includes some key parameters that will allow your computers virtual and servers through the failover time.  It is important that not only the Firmware update, but in the case of an unexpected failure due to a failure of CM.

  More if you use VMware ESXi, there is a best practices PDF for that as well.  In addition to better manage the failover, these changes have shown to improve performance as well.

  The Tech report TR1091 is available here:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20434601/download

  Changes for Windows and the knots of ESXi virtual machines will require a reboot to take effect.

  What version of firmware you are at, and what version you are migrating towards?

  Other things I always propose updates is to ensure that both controllers are plugged in your switch and in the VLAN correct.  Since assets CM are failed over to the passive, support gets much advertising is unable to access the storage after firmware update.  Or ports of the day before were not in the VLAN correct, or individuals with disabilities, etc...

  It is for these reasons that personally I prefer to do the updates via the serial port CLI.   The process is more talkative, and if something should go wrong, you need the serial port of some sort.   Since the installation and tested in advance is a huge time saver.   Here, we use serial mux so that all array controllers are easily accessible.

  Kind regards

  Don

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have the product key number I purchased through the Express upgrade. Is there a link for the download of Windows 7 professional free?

  I bought Windows 7 Professional upgrade through Express during which I contain the product key number... It seems to me not to be able to communicate with them? I need to re - install windows 7 and need a download for professional during which I contain the number of product for a 64-bit key.

  NO MATTER WHAT DIRECTION WILL BE APPRECIATE

  Kevoogle

  Alessandri keV

  Discussions were merged.

  Deleted duplicate.

  You cannot use a Windows 7 Professional anytime upgrade product key with reinstall media, it can be used only to upgrade license of qualification basis where you bought the upgrade in the first place (Starter, Home Premium).

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
  ------------------------------------
  This is how the recovery partition is accessible to most popular brands...
  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.
  For HP, press F11 directly after switching on the device
  For LG, press F11 directly after switching on the device
  For Toshiba, press and hold "0" BEFORE and during the power upward
  For Acer, press and hold ALT + F10, as soon as you see the logo
  For Asus, press F9, as soon as you see the Asus logo.
  For Samsung, press F4 to the power upward...
  For Fujitsu, press the F8 key directly after the power
  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• How install the vista upgrade when disc is destroyed?

  Computer vista of my son had the virus and tanked. Best Buy said computer necessary, new drive hard as former disc destroyed.  Then Best Buy said they needed vista install disk to the new disk. The single disc there is the original upgrade disk. Best Buy now says he has to buy a new vista or win 7 disc original system because they cannot install it on a new hard drive with a vista upgrade disc. They also forced him buy $ 200 worth of virus protection before they would do anything.

  Something wrong here. There must be a way to recover your drive destroyed isn't here?
  Thank you
  John

  You can download a copy of Windows Vista from the following link and use the product key located on the COA sticker attached to your computer to reinstall and reactivate.

  --------------------------------

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)

  X 14 - 63452.exe, boot.wim, install.wim

  Windows Vista (x 64)

  X 14 - 63453.exe, boot.wim, install.wim

  Installation instructions

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Installation and reinstallation of Windows Vista

• Software blackBerry Smartphones after the peripheral upgrade to 4.5.0.175 on my 8830, my browser is missing

  Yesterday, I upgraded my BB device and desktop software.  I upgraded to 4.5.0.175 (Platform 3.4.0.55) on my 8830 and now my browser icon is missing.  When I opened the application loader, "browser" is located in the lighter text and if I check or uncheck the box the software tells me that no change is necessary.

  How to bring back my browser?

  On your BlackBerry device, go to:

  1. options > advanced > host Routing Table > Menu > register.

  2 send your service from your carrier's BIS site books:
  Of your handheld: http://www.blackberry.com/btsc/KB15402

  Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service books.

  Your desktop PC: http://www.blackberry.com/btsc/KB02830
  North American carriers - scroll down to select your carrier
  Carriers worldwide - find your operator from the list

  3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.

• BlackBerry Smartphones really backup and restore for the OS upgrade

  Hi all

  I'm new in the world of BB and I love it.

  I've recently updated the OS of my BB "BOLD" and was a little surprised by the backup and restore process...

  He missed some relevant info such as: BB Messenger discussions, certain parameters (network, wifi, email passwords options options...).

  Is there a way to really back up everything before the update of the OS? That's all just annoying (even if it's no big deal, the vast majority is here...)

  Thank you and have a nice day.

  See you soon

  We are not effective, we are just bored.

  The difference is this: I saw the backup upgrade automatically deleted at the end of the upgrade process. Your backup beforehand will ensure you the data for use if necessary.