After restart of the firmware upgrade

Similar Questions

• path of the firmware upgrade

  Hi, I need go to the latest version 6.0.2.

  What is the best path to take

  TIA

  Hello

  FYI: The upgrade path is in the instructions to upgrade the firmware with the firmware version, to which you want to upgrade.

  6.0.2-> 7.1.11->-> 9.0 8.1.4.   Not all type of controller supports 8.x or 9.x.  What model table do you currently have?

  You will need to restart after each upgrade before loading the next version.

  If you are running VMware ESX/ESXi, you'll want to take a failure at least the first upgrade.  There is a problem with FW< 6.0.6-h2="" that="" can="" result="" is="" vmfs="" datastore="" corruption.=""  it's="" rare="" but="" shutting="" down="" prior="" to="" the="" upgrade="" would="" 100%="" prevent="">

  Saw how the measures it will take, make a maintenance window is a good idea.

  Kind regards

  Don

• How much time it take the firmware upgrade procedure?

  Hello

  I ReadyNas 204 and I'm away from the SIN it free and I wanted to install the 6.5.0 version of the firmware via the admin interface... I'm not sure how much time should I take, it is already underway for 40 minutes... is this normal?

  Sorry for the dummy question!

  Thank you

  Problem is solved. Sent someone back home to check and it seemed that the NAS could not obtain an IP address after you restart. Disconnect the RJ-45 and connected back solved the problem. NAS is back online, but would it be a bug in 6.5.0 or is it just with my camera? Nothing in the newspapers that I could see... just could not obtain an IP address...

  the NAS drive is configured with a static IPv4 address and IPv6 is disabled. If that helps.

• WRT310N V1 - how to fix the firmware after installation of the firmware v2 on v1 hardware. * SOLVED *.

  Hello

  CAVEAT! THIS IS AN ADVANCED TECHNIQUE TECH SOLUTION WITH OUT OF WARENTEE ROUGHTERS. IF LINKSYS SUPPORT CAN HELP YOU, USE IT ADAPTS ITS SERVICES TO FIRST! THIS PROCEDURE MAY OCCUR IF PURMADENT LOSS OF USE OF YOUR MORE ROUGH. THIS WORKED FOR ME, IS NOT FOR YOU!

  Location:

  Linksys WRT310n V1

  Power continuous LIGHT

  LAN port LED

  Wireless LED off

  NO RESPONSE AT ALL!

  PC hardware tested (only one is necessary):

  Card PC card Vista laptop.

  Map of gigabits Vista desktop.

  Software to download / install:

  Installed the vista Control Panel TFTP client

  Download linksys TFTP

  Download the linksys firmware (own firmware v1 material!)

  Method and procedure:

  Connect the power supply and the computer lan cable.

  Open a startup ping roughter to back.

  ping 192.168.1.1 t w 5

  No response is to be expected at this stage.

  On the computer, open your network connections folder

  Disable all OTHER network interfaces. (ALL OTHERS)

  Go to the settings of the interfaces lan.

  Disable (uncheck) then all options other tcp/ip v4

  set the address of the card manual to

  192.168.1.10 ip

  255.255.255.0 void

  192.168.1.1 door

  192.168.1.1 dns

  Yet, in the network adapter, configure the properties above the network card for 10 half-duplex speed mine was called the line speed and duplex.

  Save and close.

  NOTE: Do not release the reset button until it says to! You will need to hold it down for a long time!

  NOTE: when you hold the reset for 30 seconds, the LAN port may be flashing around 5 and 15 seconds, do not pull on the power until the local network is off about 25 to 35 seconds of holding

  On the rougher, with the power and lan cable connected.

  Press and hold the reset button for 30 secconds you will see the port of lan cable turn arround this point draw power.

  Hold the reset and wait 10 seconds.

  Press and hold the reset and power for 30 seconds until the lan cable off then

  OK, so with the power off you can release the reset button.

  from now own that you can start from here to delivery to zero if the first attempts to send the new firmware for the linksys fails.

  Open a NEW dos prompt.

  type 192.168.1.1 put C:\linksysfirmware.bin-i TFTP

  If you press on enter it will fail... so let it expire... If you type it again and wait to hit enter.

  while now in the power of reset button on the release of roughter, reset after 5 secconds.

  Press enter on the prompt back. You can send it a few time arround now it took three tryes to get the message 'SENT COMPLETE' tftp! You also see your pings in the other window start working! If you work to WAIT 2 min before doing anything then.

  If you fail for more that 1 min, unplug your roughter and start sending the firmware.

  OK so it's ping that's all? Yes!

  OK, so you've waited 2 minutes, then press the power normally and wait 10 secconds to return to power with our reboot! Start it normally.

  After that 20 secconds the roughter should be able to ping... anything else again!

  Use the TFTP Linksys program now... and install complete firmware to the roughter!

  When the message says firmware full wait two minutes and then pull the power and restart.

  FACT!

  Go back and re-read the instructions. Step by step exactly fallow or it does not work is that TECHNIQUES of ADVANCED advice. If you do not understand the thies steps you shouldn't try it yourself.

  Thank you.

• UCS C460 M2 - error 1902 during the firmware upgrade

  Hello!

  A few days ago, I could upgrade the firmware 1.5 (7 c) to 1.5(8a) and the BIOS to version 1.5.4a to 1.5.4b using file ucs-c460-huu - 1.5.8 has mapped via KVM using an old windows xp with java 1.7. In fact, this upgrade would allow access of latest java KVM, something that was lost a few months ago.

  On Monday, I did the same procedure on an exact server and everything was fine, but this server cannot update firmware.

  I get error 1902, described here:

  https://Quickview.cloudapps.Cisco.com/QuickView/bug/CSCui18044

  But there is not something to solve this problem.

  Any ideas please?

  Concerning

  David

  David,

  A few steps to try:

  -Turn off the server, remove the power supply and press and hold power for 30 seconds. Retry the upgrade.

  -Restart the MMIC before the upgrade.

  -Try the upgrade using a physical USB vs vMedia

  Let me know what questions you have and please share the results.

  Thank you

  Wes

• Problem the firmware upgrade failed WRT54G v8.2

  Today I tried to upgrade my WRT54G Router v8.2 for the latest Linksys firmware. But the upgrade was repeated each time when the progress bar reaches about 75%. It lasted more than 30 minutes and I had stopped the upgrade. Then the router has stopped working. I have reset and hard reset the router. I also tried the method of tftp to upgrade the firmware again. But the problem is still there. When I ping 192.168.1.1, I always get the message "Destination host unreachable". Could someone help me solve this problem? The power and light of the ethernet port light are always on. Is it possible to solve the problem? Any information is appreciated. Thank you very much.

  Do not use the wireless computer to update the firmware. Hard-reset the router for 1 minute and try this link and check if it works...

• Blocking of data after restart of the success

  Hi guys,.
  
  I'm stuck in a process where my DB starts but after a few seconds his begins to close all processes of sorting.  The system worked perfectly before but after todays restarted that's what happening.
  
  the following is the log from start-up to shutdown. Can help them understand what is causing this problem any one.
  
  It comes to ORACLE 11 G on LINUX business. _
  
  
  Mon Aug 13 13:12:28 2012
  Starting ORACLE instance (normal)
  Large information Pages *.
  
  Total shared global area in large Pages = 0 KB (0%)
  
  Large Pages used by this instance: 0 (0 KB)
  Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
  Large Pages configured wide system = 0 (0 KB)
  The Page Size = 2048 KB
  
  RECOMMENDATION:
  Total size of Global region shared is 4098 MB. For optimal performance,
  before next restart of the instance, to increase the number
  unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
  scale to get 100% of the Shared System
  Global area allocated by using large pages
  ***********************************************************
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  Shared memory for the instance of created monitoring segment
  SNA system picked latch-free 3
  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
  Autotune undo retention is enabled.
  IMODE = BR
  ILAT = 28
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  Commissioning:
  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
  ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
  Name of the system: Linux
  Name of the node: OM5000
  News Release: 2.6.18 - 308.el5
  Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
  Machine: x86_64
  Using the settings in client pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
  Parameters of the system with default values:
  process = 150
  nls_language = "ENGLISH."
  nls_territory = 'AUSTRALIA '.
  SGA_TARGET = 4G
  control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
  control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
  db_recovery_file_dest_size = 50000M
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
  audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
  AUDIT_TRAIL = 'DB '.
  db_name = "OML5K".
  open_cursors = 300
  pga_aggregate_target = 34558M
  diagnostic_dest = ' / u01/app/oracle '.
  Mon Aug 13 13:12:28 2012
  PMON started with pid = 2, OS id = 21976
  Mon Aug 13 13:12:28 2012
  PSP0 started with pid = 3, OS id = 21978
  Mon Aug 13 13:12:29 2012
  VKTM started with pid = 4, OS id = 21980 high priority
  VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
  Mon Aug 13 13:12:29 2012
  GEN0 started with pid = 5, OS id = 21984
  Mon Aug 13 13:12:29 2012
  DIAG started with pid = 6, OS id = 21986
  Mon Aug 13 13:12:29 2012
  DBRM started with pid = 7, OS id = 21988
  Mon Aug 13 13:12:29 2012
  DIA0 started with pid = 8, OS id = 21990
  Mon Aug 13 13:12:29 2012
  MA started with pid = 9, OS id = 21992
  Mon Aug 13 13:12:29 2012
  DBW0 started with pid = 10, OS id = 21994
  Mon Aug 13 13:12:30 2012
  DBW1 started with pid = 11, OS id = 21996
  Mon Aug 13 13:12:30 2012
  DBW2 started with pid = 12, OS id = 21998
  Mon Aug 13 13:12:30 2012
  DBW3 started with pid = 13, OS id = 22000
  Mon Aug 13 13:12:30 2012
  LGWR started with pid = 14, OS id = 22002
  Mon Aug 13 13:12:30 2012
  CKPT started with pid = 15, OS id = 22004
  Mon Aug 13 13:12:30 2012
  SMON started with pid = 16, 22006 = OS id
  Mon Aug 13 13:12:30 2012
  RECCE has started with pid = 17, OS id = 22008
  Mon Aug 13 13:12:30 2012
  MMON started with pid = 18, OS id = 22010
  Mon Aug 13 13:12:30 2012
  MMNL started with pid = 19, OS id = 22012
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  commissioning or shared server 1...
  Environment ORACLE_BASE = / u01/app/oracle
  Mon Aug 13 13:12:30 2012
  kcbztek_populate_tbskey: key of db in controlfile and datafile 1 is incompatible...
  Complete full restoration of datafile 4 to datafile copy u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
  Checkpoint is 995547
  last deallocation CPN is 3
  Complete full restoration of datafile 3 to datafile copy u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
  Checkpoint is 995547
  last deallocation CPN is 3
  Mon Aug 13 13:13 2012
  Complete full restoration of datafile 2 to datafile copy u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
  Checkpoint is 995547
  last deallocation CPN is 995211
  Complete full restoration of datafile 1 to datafile copy u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
  Checkpoint is 995547
  last deallocation CPN is 993074
  Mon Aug 13 13:13:08 2012
  Create database set controlfile reuse "OML5K."
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
  Default temporary tablespace will be necessary for a locally managed database in future release
  Mon Aug 13 13:13:08 2012
  Mount of redo thread 1, with mount id 3547719972
  Completed: Create controlfile reuse set database 'OML5K '.
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  Closure of proceedings (immediate)
  Closure of proceedings: in addition to logons disabled
  Stop background MMNL process
  MMON background process stop
  The high waters = 1 license
  All dispatchers/dispatchers and shared servers stop
  ALTER DATABASE CLOSE NORMAL
  ORA-1109 marked during: ALTER DATABASE CLOSE NORMAL...
  ALTER DATABASE TO REMOVE
  Stop process to archive
  Archiving is disabled
  Completed: ALTER DATABASE DISMOUNT
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  Mon Aug 13 13:13:11 2012
  Stop background VKTM process
  Mon Aug 13 13:13:13 2012
  Instance shutdown complete
  Mon Aug 13 13:13:13 2012
  Starting ORACLE instance (normal)
  Large information Pages *.
  
  Total shared global area in large Pages = 0 KB (0%)
  
  Large Pages used by this instance: 0 (0 KB)
  Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
  Large Pages configured wide system = 0 (0 KB)
  The Page Size = 2048 KB
  
  RECOMMENDATION:
  Total size of Global region shared is 4098 MB. For optimal performance,
  before next restart of the instance, to increase the number
  unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
  scale to get 100% of the Shared System
  Global area allocated by using large pages
  ***********************************************************
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  SNA system picked latch-free 3
  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
  Autotune undo retention is enabled.
  IMODE = BR
  ILAT = 28
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  Commissioning:
  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
  ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
  Name of the system: Linux
  Name of the node: OM5000
  News Release: 2.6.18 - 308.el5
  Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
  Machine: x86_64
  Using the settings in client pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
  Parameters of the system with default values:
  process = 150
  nls_language = "ENGLISH."
  nls_territory = 'AUSTRALIA '.
  SGA_TARGET = 4G
  control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
  control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
  db_recovery_file_dest_size = 50000M
  nonerecovery_through_resetlogs = TRUE
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
  audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
  AUDIT_TRAIL = 'DB '.
  db_name = "OML5K".
  open_cursors = 300
  pga_aggregate_target = 34558M
  diagnostic_dest = ' / u01/app/oracle '.
  Mon Aug 13 13:13:14 2012
  PMON started with pid = 2, OS id = 22030
  Mon Aug 13 13:13:14 2012
  PSP0 started with pid = 3, OS id = 22032
  Mon Aug 13 13:13:15 2012
  VKTM started with pid = 4, OS id = 22034 high priority
  VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
  Mon Aug 13 13:13:15 2012
  GEN0 started with pid = 5, OS id = 22038
  Mon Aug 13 13:13:15 2012
  DIAG started with pid = 6, OS id = 22040
  Mon Aug 13 13:13:15 2012
  DBRM started with pid = 7, OS id = 22042
  Mon Aug 13 13:13:15 2012
  DIA0 started with pid = 8, OS id = 22044
  Mon Aug 13 13:13:15 2012
  MA started with pid = 9, OS id = 22046
  Mon Aug 13 13:13:15 2012
  DBW0 started with pid = 10, OS id = 22048
  Mon Aug 13 13:13:15 2012
  DBW1 started with pid = 11, OS id = 22050
  Mon Aug 13 13:13:15 2012
  DBW2 started with pid = 12, OS id = 22052
  Mon Aug 13 13:13:15 2012
  DBW3 started with pid = 13, OS id = 22054
  Mon Aug 13 13:13:15 2012
  LGWR started with pid = 14, OS id = 22056
  Mon Aug 13 13:13:15 2012
  CKPT started with pid = 15, OS id = 22058
  Mon Aug 13 13:13:15 2012
  SMON started with pid = 16, OS id = 22060
  Mon Aug 13 13:13:15 2012
  RECCE has started with pid = 17, OS id = 22062
  Mon Aug 13 13:13:15 2012
  MMON started with pid = 18, OS id = 22064
  Mon Aug 13 13:13:15 2012
  MMNL started with pid = 19, OS id = 22066
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  commissioning or shared server 1...
  Environment ORACLE_BASE = / u01/app/oracle
  Mon Aug 13 13:13:15 2012
  Create database set controlfile reuse "OML5K."
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
  Default temporary tablespace will be necessary for a locally managed database in future release
  Mount of redo thread 1, with mount id 3547724076
  Completed: Create controlfile reuse set database 'OML5K '.
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  Stop background MMNL process
  MMON background process stop
  From MMON background process
  From MMNL background process
  Mon Aug 13 13:13:18 2012
  MMON started with pid = 18, OS id = 22077
  Mon Aug 13 13:13:18 2012
  MMNL started with pid = 19, OS id = 22079
  ALTER SYSTEM active session restricted;
  ALTER database open resetlogs ' OML5K'
  RESETLOGS after incomplete recovery until this THAT the CHANGE 995547
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
  Deletion log 1 of thread 1 sequence number 0 online
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Mon Aug 13 13:13:18 2012
  Running the Checker found 1 new failures of persistent data
  Online redo logfile 1 full compensation
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
  Erasing online newspaper wire 2 1 sequence number 0
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 2 complete
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
  Erasing online Journal 3 of thread 1 sequence number 0
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 3 complete
  Log in online /u01/app/oracle/oradata/OML5K/redo01.log: thread 1 Group 1 had been previously authorized
  Log in online /u01/app/oracle/oradata/OML5K/redo02.log: thread 1 group 2 was previously disabled
  Log in online /u01/app/oracle/oradata/OML5K/redo03.log: thread 1 Group 3 has been previously authorized
  Definition of embodiment of recovery target 2
  Assigning activation ID 3547724076 (0xd375f92c)
  Thread 1 is open to the log sequence 1
  Currently journal # 1, seq # 1 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
  Opening of redo thread 1
  SMON: enabling cache recovery
  [22071] successfully put 2 undo Tablespace online.
  Cancel initialization is complete series: 0 start: 256557774 end: 256557834 diff:60 (0 seconds)
  Dictionary check start
  Tablespace 'TEMP' #3 found in the data dictionary,
  but not in the controlfile. Adding to controlfile.
  Verification of the complete dictionary
  Check the compatibility of the header files for tablespace 11g encryption...
  Compatibility check header files 11g for tablespace encryption completed
  SMON: enabling the recovery of tx
  *********************************************************************
  ATTENTION: The following temporary tablespaces do not contain any file.
  This condition can occur when a backup controlfile
  been restored. It may be necessary to add files to these
  storage spaces. This can be done using the SQL statement:
  
  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE
  
  Furthermore, if these temporary tablespaces are no longer
  necessary, then they can be recessed.
  Temporary tablespace is empty: TEMP
  *********************************************************************
  Database character set is US7ASCII
  Create the relationship IPS_PACKAGE_UNPACK_HISTORY
  No Resource Manager plan active
  **********************************************************
  WARNING: Files may exist in db_recovery_file_dest
  that are not known to the database. Use the RMAN command
  RECOVERY of CATALOG AREA again all these files from the catalog.
  If the files cannot be catalogued, then remove them manually
  using the OS command.
  Cause one of the following events:
  1. a backup controlfile was restored.
  2. a standby controlfile was restored.
  3. the controlfile was recreated.
  4 db_recovery_file_dest had previously been activated and
  then disabled.
  **********************************************************
  off replication_dependency_tracking (no replication multimaster async found)
  From QMNC background process
  Mon Aug 13 13:13:20 2012
  QMNC started with pid = 24, OS id = 22087
  LOGSTDBY: Validation controlfile with logical metadata
  LOGSTDBY: Validation complete
  World famous OML5K
  Completed: alter resetlogs open database 'OML5K '.
  ALTER database rename global_name to 'OML5K '.
  Completed: alter database rename global_name to 'OML5K '.
  ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
  Completed: ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
  ALTER DEFAULT DATABASE TABLESPACE 'USERS '.
  Completed: ALTER DATABASE default TABLESPACE 'USERS '.
  change the character set of database INTERNAL_CONVERT ZHS16GBK
  From CJQ0 background process
  Mon Aug 13 13:13:22 2012
  CJQ0 started with pid = 23, OS id = 22089
  Mon Aug 13 13:13:23 2012
  50000 MB db_recovery_file_dest_size is 0.00% used. It is a
  user-specified limit on the amount of space that will be used by the present
  for the files related to the recovery of databases and does not reflect the amount of
  space available in the underlying file system or ASM diskgroup.
  Mon Aug 13 13:13:27 2012
  Thread 1 Advanced to save sequence 2 (LGWR switch)
  Currently Journal # 2 seq # 2 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
  Mon Aug 13 13:13:30 2012
  Character in controlfile to ZHS16GBK update
  Set the synchronization information in connection with the base characters
  SYS. RULE$ (CONDITION) - modified CLOB representation
  SYS. PLANNER$ _EVENT_LOG (ADDITIONAL_INFO) - modified CLOB representation
  SYS. SNAP$ (REL_QUERY) - modified CLOB representation
  SYS. SNAP$ (ALIAS_TXT) - modified CLOB representation
  SYS. WRI$ _ADV_OBJECTS (ATTR4) - modified CLOB representation
  SYS. WRI$ _ADV_OBJECTS (OTHER) - modified CLOB representation
  SYS. WRI$ _ADV_DIRECTIVE_META (DATA) - modified CLOB representation
  SYS. WRI$ _DBU_FEATURE_METADATA (INST_CHK_LOGIC) - modified CLOB representation
  SYS. WRI$ _DBU_FEATURE_METADATA (USG_DET_LOGIC) - modified CLOB representation
  SYS. WRI$ _DBU_HWM_METADATA (LOGIC) - modified CLOB representation
  SYS. WRI$ _OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - modified CLOB representation
  Mon Aug 13 13:13:30 2012
  From OCMS background process
  Mon Aug 13 13:13:30 2012
  OCMS started with pid = 27, OS id = 22098
  SYS. WRI$ _REPT_FILES ($SYS_NC00005) - modified CLOB representation
  SYS. AMOUNT $ (SRC_STMT) - modified CLOB representation
  SYS. AMOUNT $ (DEST_STMT) - modified CLOB representation
  SYS. ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - modified CLOB representation
  SYS. METASTYLESHEET (STYLE sheet) - modified CLOB representation
  XDB. XDB RESOURCE $ (SYS_NC00027$)-modified CLOB representation
  XDB. XDB$ XDB_READY (DATA) - modified CLOB representation
  XDB. XDB$ DXPTAB ($SYS_NC00006) - modified CLOB representation
  MDSYS. SDO_XML_SCHEMAS (XMLSCHEMA) - modified CLOB representation
  Thread 1 Advanced to save sequence 3 (switch LGWR)
  Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
  Mon Aug 13 13:13:43 2012
  MDSYS. SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - modified CLOB representation
  MDSYS. SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - modified CLOB representation
  MDSYS. SDO_STYLES_TABLE (DEFINITION) - modified CLOB representation
  SYSMAN. MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - modified CLOB representation
  SYSMAN. MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - modified CLOB representation
  SYSMAN. MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - modified CLOB representation
  SYSMAN. MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - modified CLOB representation
  SYSMAN. MGMT_SEC_INFO (B64_LOCAL_CA) - modified CLOB representation
  SYSMAN. MGMT_SEC_INFO (B64_INTERNET_CA) - modified CLOB representation
  APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - modified CLOB representation
  APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - modified CLOB representation
  APEX_030200.WWV_FLOW_SHORTCUTS (SHORTENED) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (BOX) - modified CLOB representation
  Mon Aug 13 13:13:54 2012
  Thread 1 cannot allot of new newspapers, sequence 4
  Checkpoint is not complete
  Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
  Mon Aug 13 13:13:57 2012
  APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - modified CLOB representation
  Thread 1 Advanced to record the sequence 4 (switch LGWR)
  Currently journal # 1, seq # 4 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
  APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (MODEL) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - modified CLOB representation
  APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
  APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - modified CLOB representation
  APEX_030200.WWV_FLOW_BANNER (BANNER) - modified CLOB representation
  APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (MODEL) - modified CLOB representation
  APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - modified CLOB representation
  Mon Aug 13 13:14:08 2012
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - modified CLOB representation
  Information about the game refreshing attributes of type new character
  Completed: alter database INTERNAL_CONVERT ZHS16GBK character set
  Mon Aug 13 13:14:11 2012
  ALTER SYSTEM disable session restricted;
  Mon Aug 13 13:14:12 2012
  Thread 1 Advanced to record the sequence 5 (switch LGWR)
  Currently Journal # 2 seq # 5 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
  Mon Aug 13 13:14:28 2012
  Closure of proceedings (immediate)
  OCMS background process stop
  Closure of proceedings: in addition to logons disabled
  Stop background QMNC process
  Mon Aug 13 13:14:29 2012
  Stop background CJQ0 process
  Stop background MMNL process
  MMON background process stop
  License of the high waters = 14
  Stop slave queue treatments, flags = 7
  Treatment of slave leader arrested projects
  All dispatchers/dispatchers and shared servers stop
  ALTER DATABASE CLOSE NORMAL
  Mon Aug 13 13:14:33 2012
  SMON: disabling recovery tx
  SMON: disabling of cache recovery
  Mon Aug 13 13:14:33 2012
  Stop process to archive
  Archiving is disabled
  Stopping the process Archive avoided: active 0
  Thread 1 is thrown to the sequence of journal 5
  Closing of redo thread 1
  Completed: ALTER DATABASE CLOSE NORMAL
  ALTER DATABASE TO REMOVE
  Stop process to archive
  Archiving is disabled
  Completed: ALTER DATABASE DISMOUNT
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  Mon Aug 13 13:14:34 2012
  Stop background VKTM process
  State of the system dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
  Mon Aug 13 13:14:36 2012
  Instance shutdown complete
  Mon Aug 13 13:14:37 2012
  Starting ORACLE instance (normal)

  We are in 2013, all the logs of your alerts indicate former far

• Extend Proxy hangs after restart of the Cluster

  One of our Application groups faced an interesting problem:
  
  -We have a network problem that causes the cluster restart (not good, but should be recoverable).
  -Extend Proxy restart
  -Because the Unix port holds on the Socket to the server during 1 min the Proxy fails but crashes
  
  Given that the process blocks (infact that all proxies do) the cluster becomes unusable.
  
  We use 3.5.2.p8.
  
  All thoughts, we should lift a SR?
  
  Best, Andrew.
  
  Total duration for which the application threads were arrested: 0,0050880 seconds
  2009-12-03 06:05:50.185/46226.639 Oracle coherence GE 3.4.2/411p8 < Info > (thread = main Member, = 59): Restarting Service: ExendTcpProxyService
  2009-12-03 06:05:50.235/46226.689 Oracle coherence GE 3.4.2/411p8 < D6 > (thread = Proxy: ExendTcpProxyService:TcpAcceptor:TcpProcessor, Member = 59): liaison ServerSocket for 11.160.32.243:17061
  2009-12-03 06:05:50.236/46226.690 Oracle coherence GE < error > 3.4.2/411p8 (thread = Proxy: ExendTcpProxyService:TcpAcceptor:TcpProcessor, Member = 59): TcpAcceptor ending because of an exception not handled: com.tangosol.util.WrapperException
  Application time: 0,0009600 seconds
  Total duration for which the application threads were arrested: 0,0039030 seconds
  2009-12-03 06:05:50.236/46226.690 Oracle coherence GE < error > 3.4.2/411p8 (thread = Proxy: ExendTcpProxyService:TcpAcceptor:TcpProcessor, Member = 59):
  (Packed: error binding ServerSocket to 11.160.32.243:17061) exception java.net.BindException: address already in use
  at sun.nio.ch.Net.bind (Native Method)
  at sun.nio.ch.ServerSocketChannelImpl.bind (unknown Source)
  at sun.nio.ch.ServerSocketAdaptor.bind (unknown Source)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.acceptor.TcpAcceptor.configureSocket(TcpAcceptor.CDB:25)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.acceptor.TcpAcceptor$ TcpProcessor.onEnter (TcpAcceptor.CDB:25)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
  at java.lang.Thread.run (unknown Source)
  ... process hangs after that...

  Hello Andrew,.

  Please take a look at the page. If you set this problem should go away.

  Best regards
  -Dave

• WRT160N entirely in brick after having done the firmware update!

  I saw not related to problems with my VOIP service this morning and quickly solved. I also did a priority to ensure that I was using the latest firmware for all my products. On the site Web of Linksys, I noticed that there is an update! Perfect, or so I thought.

  I downloaded the version appropriate for my router and I continued to the interface of the router to date. I went to update firmware and everything was fine until what 98%...

  He acted like he had disconnected the router (it was done on a solid line directly to the computer not a Wi - Fi connection). I disabled the router once I did realize that it did not work.

  I tried to reset the router. No dice. I tried to ping the router. 100% packet loss.

  IT BRICKED IT!

  I decided to call technical support for assistance, but they informed me that the guarantee had, o so ideally just expired and I was on luck. So wait... Let me get this straight...

  1. I buy your router

  2. the router works perfectly for a year

  3. update the firmware using the method described in the literature and using your firmware file

  4. the router can not update and BRICKS

  So, was it that someone else as lucky as me? What are my options at this point?

  (Mod Note: under the guidance of the compliance of the directive.)

  Try everything here first unbrick your router.

  http://www.savemondo.com/2008/11/21/how-to-unbrick-a-Linksys-router/

  Make sure that you have the correct version of the ready firmware.

• Sony headphones Smart MW1 Pro - the device does not display mp3 information to do the firmware upgrade 0.1.D.0.6

  I bought the Smart Sony headphones Pro because the Sony site where there is an official document indicates that it is 100% compatible with my Samsung Galaxy Nexus.

  Everything was fine, until the unit was asked to update to version 0.1.D.0.6.

  After the pair with the headset Smart Display tells me "No Info" instead of the album and the name of the mp3 information.

  According to the forums, I'm not the only one with the problem and also cannot go back to previous firmware was 0.1.C.0.3.

  My Samsung Galaxy Nexus had the OS: android 4.2.1 when I run right.

  Today the android Smartphone I upgraded to 4.2.2 and maybe thought now and nothing will fix the problem, the problem is definitely the gadget.

  We need an urgent solution to this problem.

  This problem has been resolved by the 0.1.E.1.4 firmware which was released yesterday, also improves the screen, enlarge the icons and the clock digits, also solves problems with the mating with the Vita!

  Thanks Sony Mobile!

• Black screen after restart of the Bootcamp Assistant

  Hello

  I understand that 10 Windows is not supported with the MBP Late 2011 officially by Apple, I have it working earlier today and had no problems at all. I tried to add another partition for windows side so that I would be able to install Deep Freeze on Windows have a clean install of Windows every time that I boot in there and have all my programs and files on what would have been called "Local D.

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install. I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  PerfectStory wrote:

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install.

  You have deleted the EFI Partition from Mac. Not a very good idea. She does not hold the MBR. Your Mac uses a hybrid MBR. The MBR and the boot for Windows Manager are two separate entities.

  I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  Disk utility is now considered an invalid drive due to a missing EFI partition. How did you again the reader "XV"? If you start from W10 in the optical drive, it is no Bootcamp involved more.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  Please after the release of the following Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Losing files, programs and settings after restart of the system or of the judgment

  Whenever I restart or star - with respect to a previous stop, restarting my laptop with programs and missing files. The only way to solve this problem is to restore the system several times until I have the chance. Why is this happening?

  Hello

  It seems that the profile does not work correctly then try these methods to solve the problem.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------------------------

  2. you can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After restart of the cc does not start

  Hello

  on iMac27 with OS X Yosemite. After each restart creative cloud does not start. I must force "reboot several times for throwing.

  Any suggestions?

  Thank you

  Enrico

  Hi Enrico,.

  Please try the below steps mentioned and see if it works.

  1. open Activity Monitor

  2 search for Adobe related process (Creative cloud, coresync, AAMnotifire/updater)

  3 - put an end to all Services from Adobe

  4 restart the computer, try to run.

  Cleaning tool allows you to delete the corrupted files creative cloud and reinstall it.

  • Removal tool: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  • Installer: creative cloud help | Download, install, update or uninstall applications

  If you still find the same behavior, please try to create a new admin account and try to run to this user account.

  Thank you

  Atul Saini

• why I get a 502 Bad Gateway in SOME sites only after restarting, reset the browser, update flash player etc and always get "bad gateway"?

  2 sites in particular when I go to old-time TV stream, my movie site is ok, youtube is ok, all plugins are up-to-date, I reset firefox, restarted and all it all that regular but still these 2 sites will not broadcast my video

  now it's all links on the sites given, I tried everything, maybe that it's related to gave 2 sites, one being 'watchseries.ch' I don't know, all the input is appreciated. At this point, I can just wait a day or two before you try something else and see if it is these particular sites.

• Black screen after restart, and the machine to sign

  Send a message to PC-cillan virus my conputer he loses her, so I rebooted it. When he returned to the top of the screen Dell came and then I got floppy diskette seek failure. Strike F1 to continue. I do and it takes a black screen, and the computer is still on Windows does not come to the top or even try. Ive tried F12 and I cannot get into safe mode that brings back me to black screen. It gives me the same symptoms as the BSOD but no cursor.

  Hi jhintense,

  As the virus is running on the computer, we recommend that you first of all allows you to remove the virus from your computer. To do this, you might consider contacting the provider of security software.

  Try these steps and check if your computer starts on the desktop.
  Step 1: Try the last known good configuration
  a. start your computer and press the F8 key continuously to see the menu advanced startup options.
  b. in the menu, select last known good configuration, and press to enter.
  c. see if the system will load very well.

  Step 2: Disable the Floppy drive in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. turn off the power or turn off the disk and save the settings.
  c. restart the computer and check if Windows loads very well.

  Visit our Microsoft answers feedback Forum and let us know what you think.