Necessary Assistsance with Aspire E11 - E3-111-C5JR

Similar Questions

• Brand new Aspire E11 (E3-111) brick by the BIOS utility official Acer - what now?

  Yesterday, I bought a new netbook for my girlfriend. I decided to make sure that the netbook is using the latest BIOS and latest drivers. So I downloaded the BIOS utility official support page (http://www.acer.cz/ac/en/US/content/drivers/5329;-;) Aspire 20E3-111%), extract BIOS_Acer_1.05_A_A.zip and launched BIOS_Acer_1.05_Windows\ZHJ_105.exe.

  The utility began to update the bios without asking (!), the system has been rebooted and I also saw a progressbar finishing 100%. Then I waited... nothing (battery was full and connected to the AC). Now, the netbook is dead. Power button does nothing.

  Is there something I can do before I go back?

  My broken netbook has been replaced by a new. You can be sure that I won't try updating the BIOS again ;-).

• ACER Aspire E11 (SD32gb) error "no boot device."

  Hello. I formatted Acer aspire E11 with windows 8.1 USB CD-ROM. It worked fine but the next reboot, it no longer starts and it does not accept either boot from usb, pen or usb cd rom, not same Hirens Boot begins. Don't always says "No boot device" with a picture of an SD card and a magnifying glass. Is there a solution to this?

  Thank you very much.

  OK, back to the UEFI.

  on the BIOS disable secure boot (just to identify possible)

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/27071/~/how-to-enable-or-disable-secure-boot

  Also check if F12 Boot menu is activated on the main tab.

  Press F10 save and exit, then try to boot from USB CD again.

• Aspire E11 guard lock, ran the scan with Trend Micro House Call and no malware found.

  Bought new 8/10.  Installed Windows 10 a few weeks ago and it ran great until the last couple days.  Blockages occurring more frequently, cursor freezes.  Scans with Malware Bytes and Trend Micro House Call found no malicious software.  Any suggestions beyond return to the target.  I have until 9/9 return for a full refund.

  UPDATE, UPDATE: Fix Acer support didn't work.  No suggestions of the community of Acer.  Did Factory Reset back to 8.1 Windows and reinstalled Windows 10 - still locked.  Resumed the computer target within their period of 30 days full refund.  Target can send to Acer.  Thank you target.

• Aspire eRecovery ES1-111 Medium

  Hi, I have an Aspire ES1-111 who had a breakdown of its Members, the recovery partition is slaughtered and the bios has trouble booting from the recovery key. The acer store does no stick eRecovery for ES1-111 and repair-page said that the SNID is not eligible for the service.

  I'm basically left with a brick because there is no legal way to get another copy of 'Make 8.1 with Bing', because it is OEM stuff and I'm obviously not a reseller. Short buying win 8.1 for half price the unit, what can I do?

  Have you checked in with the SNID and the serial number on the appropriate regional site.

  If your computer is under warranty, you can contact Acer German technical support here support German Acer

  You can contact them directly and check the warranty information and send it for repair.

• Drive necessary recovery for my Qosmio F60 - 111

  Please can someone help me find the cd of recovery for my Qosmio F60 - 111.

  I lost it

  I agree with IronMan.
  The recovery can be ordered from the Toshiba that the link (above) to the page is all you need

• AC adapter does not work with the Qosmio F50-111

  Hello world

  I bought a Qosmio F50-111 this morning.
  The power adapter does not work on my computer (no led lit when connected), but he's working on a Satellite A300 for a working partner.
  And his power works on mine.

  I would like to know if people here have a Qosmio F50-111, the model of power that I have a model 3290-3AC3... I would like to know if it's good.

  Thank you all

  Before you expect an answer here, contact your local dealer and clarify this situation. You can also contact the nearest authorized service provider. They can say with certainty if the power adapter is one that suits or not. If you have the wrong I'm sure you get the right one for free.

• Aspire black screen 111 es1

  Hi, on my acer aspire are 111, after I restarted, the display does not illuminate. When that I start it, it will display the BIOS screen and the screen of the initial startup of windows, the screen turns off. I see all the lights on. Now, when I plug in the charger, it will display the screen, but when I unplug the charger, it will give me the black screen again. Please advise what I can do to solve this problem.

  Things I did were:

  OS factory reset, did not work

  Installed windows 7, did not work

  Reset the BIOS to factory settings did not work

  But this one worked. I installed Ubuntu 14.04 to the machine, and cela freakin ' worked. But now I've lost my bootable ubuntu USB install and I have windows 8 on my machine. Is there an appropriate way to solve this problem?

  is not serious bruvs, I just installed ubuntu again. What Im going to do it is to sell this and make me a lenovo hahaha

  [deleted inappropriate content]

• Compatibility with Aspire V15 Nitro SSD

  Hello

  An SSD is compatible with any laptop? I mean, is there any brand/model required for a mobile specific? I want to move to 250 GB ssd (Samsung Evo) to the system memory usage and buying an external hard drive 2 TB for all my personal files. Will there be conflict? Thanks in advance!

  Aspire V15 Nitro (571 G-VN7-73ZJ)

  AngeloMark11 wrote:

  Hello

  An SSD is compatible with any laptop? I mean, is there any brand/model required for a mobile specific? I want to move to 250 GB ssd (Samsung Evo) to the system memory usage and buying an external hard drive 2 TB for all my personal files. Will there be conflict? Thanks in advance!

  Aspire V15 Nitro (571 G-VN7-73ZJ)

  You can adapt any SSD 2.5 ". It works perfectly.

  However, your laptop is a m2 SSD slot. Who can easily manage a 250 GB SSD M.2. The only downside is that I think it would be a little more expensive and that the slot, it is across the motherboard, so to fit an SSD of m2 in height, you will need to get the motherboard out. But this also applies to the RAM. It's more work in the laptop machine code to replace the HARD drive. But the advantage is that you can keep the drive HARD for mass storage and the SSD for the OS and some software.

• Problems with aspire switch SW5-012 10

  New to the community. Just bought an Aspire SW5 - 012 Switch 10. Upgrade to Windows 10 before use. We use Office 365 with Onedrive for storage. After a week, the machine connects to the wifi, but not the internet. I ran 10 Windows diag on connection and got "wifi is not the valid IP configuration". I could get it to make the connection if I went to the command prompt and did; ipconfig/release and then ipconfig/renew. I discuss with Windows 10 tech, to see if problem with Windows. He clearly had me Winsock, Tcp, Int and reset. Nothing has worked. Then he told me to uninstall the network adapter driver and reinstall. Once I did, I can't go past media disconnected (State of the media). Everyone has problems of this kind. We have (badly) need this tablet to work.

  Problem solved! After posting here, I found a blog, Geeks in Phoenix, who gave the commands to reset the network card. I followed their instruction and it worked! We're back in business. How to reset the network adapter in Windows 10: go to the administrative level command prompt and run these four commands. netsh advfirewall reset, then enter. netsh int ip reset, then enter. netsh int ipv6 reset, then enter. netsh winsock reset, then enter. Restart the computer to complete the reset. I'm guessing that we had something change in the firewall settings, in the configuration of the adapter. The Windows 10 technician, that I have chatted with earlier, couldn't do that to me.

• Brightness problem with aspire switch 10

  Hi all

  I have a gene with a switch screen aspire 10.
  The brightness level is constantly changing. It is not dependend on the ambient light, because I turned off Adaptive brightness. (When I put a flashlight on the light sensor that does nothing).

  For example: sometimes when I switch between the metro and the desktop mode. Notable stage screens turns a bit more or less clear. It also happens when you watch movies, opening programs, almost always when the image changes.

  Does anyone know a solution to this?

  Kind regards.

  To resolve this problem, I did this.

  On the desktop, right-click. Properties of the graph. Power. I turned off the screen of the energy saving technology.

  I hope this works for you also.

  

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• support assistant saying 'important necessary action' with the Red exclaimation mark, but none found

  Hello.  I have a laptop G6 and when I turn it on I get a red exclaimation mark on the icon support assistant and when a hover above him with cursor, it says 'important necessary action. "  When I go in, there no update or advice or something that I see for me to do.  Even if I restart of/off voltage, the Red rest mark.  any help would be appreciated as this is my OCD in!  See you soon.

  Hello gtx007

  Thank you for having responded with the necessary information. I would like you to uninstall, and then reinstall the HP Support Assistant software by following the steps I have described below:

  Step 1. Open programs and features by clicking on the button start

  Step 2. Click on Control Panel

  Step 3. Click on programs

  Step 4. Click on programs and features
  Step 5. Select HP Support Assistant

  Step 6. Click on uninstall

  Step 7. Restart your computer

  Step 8. Download and install the latest version of HP Support Assistant

  This should solve your problem and allow the HP Support Assistant to function correctly on your system. I want to thank you for posting your question here on the HP Forums. Have a great weekend!

• My Lexmark pro901 is not compatible with aspire which has windows 8 how update drivers

  My first Lexmark pro 901 is not compatible with my acer aspire comes with windows 8

  My first Lexmark pro 901 is not compatible with my acer aspire comes with windows 8

  All devices (and software) is supported by the product to the manufacturer for questions.
   
  In the case of your query: Lexmark.
   
  I assume you mean, specifically, you have the ( Lexmark Pinnacle Pro901<-- that="" is="" a="" link="" to="" the="" support="" web="" page="" for="" that="" particular="" device="" from="" the="" manufacturer="" -="" lexmark="" -="" that="" you="" can="" click="">
   
  What I suggest to try, as Lexmark does not seem to support this product directly under Windows 8, is to try first using Windows Update during the installation of the printer such as suggested by Lexmark.
   
  If this fails, try to simply download and install the latest drivers for any architecture (32-bit or 64-bit) Windows (in compatibility mode), you have no matter what Windows it says that it is for (probably Windows 7).

• 4 TB HARD drive in windows 7 with Aspire M1641?

  I installed Windows 7 on my Aspire M1641 and want to use a 4 TB HARD drive.
  How to handle that? I put it as a GPT disk, but it recognizes the disc as GB 1678.

  IronFly wrote:

  It uses NVIDIA GeForce 7050 / nForce 620i and it will be very difficult to find new drivers, since it is a very old chipset and not well supported NVIDIA.

  for windows 7 x 64, this is the last available:

  http://www.nvidia.com/download/driverResults.aspx/57492/en-us

  Unfortunately, this does not work, but finally I found the driver for the SATA controller and then everything worked. It is: NVIDIA nForce Serial ATA Controller 10.6.0.319 who finally did the job.

  Thanks everyone for trying to help!