my printer is not printing in word 2007 documents.

Similar Questions

• Color of bad prints of Word 2007. O.P. XP

  Printing from word 2007 with black text is printed in Cyan?  Repair Word, cleaned the Registrey and HP driver updated, but not corrected the fault?  Any ideas?

  You don't mention what model of printer you have, but in the meantime, try this.  If this does not resolve your problem, please let me know and add your printer model so I can do more research for a resolution.

  Tobindo

  A representative from HP

  HP PSC 1100, 1200, or series Officejet 4100 print does not correctly  (See this link for full instructions with diagrams, more alternatives to try.  The following instructions are from this document.

  The colors are incorrect

  Normally, this happens because one of the ink cartridges are low on one or more ink colors, follow these steps to determine if the cartridge is empty.

• Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

  Weird printing problem

  Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

  When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

  Hi TNCharlie,

  (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

  Fonts and graphics damaged can cause printing problems in Word/WordPad

  (2) using a wireless printer?

  Check to see if it makes a difference if connected.

  Step 1: This test in word

  1. open a new blank document in Word.

  2. on the first line of the document, type the following text:

  = Rand (10)

  3. press ENTER. This inserts 10 paragraphs of the sample text.

  4. try to print the document.

  5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

  Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think

• batch printing in Word 2007

  How to do batch printing in Word 2007?  I would like to highlight the Word files closed 10-15 (in a directory) and print with a single command. Otherwise, I open and print one file at a time. Thank you.

  Well I copied the Documents folder / My Documents.  Use Ctrl + click to select the files, then R, click on print and received the same error message.  Ambiguous name detected: TmpDDE.  Frustrated...

  Refer to this error and can help the following:
  http://www.batch-print.com/kb/KB0015.html

  http://support.Lexis-Nexis.com/LNOTM/record.asp?articleid=9939

  http://support.Microsoft.com/kb/165860

• My printer prints a word (my documents) but prints photos of my images,

  My printer prints a word (my documents), but prints pictures of my images, black misuse. Printer copy black text.

  Moved from feedback

  Original title: impression of the printer

  Hi Helen,

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?

  -Don't you get an error message when you print from MS word documents?

  -What is the brand and model of the printer?

  -Have you tried to uninstall and reinstall the printer to see if it makes a difference?

  Discover the answer to Debbie_H on the same issue in http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/unable-to-print-from-ms-word-only/67b6148a-4447-42b6-b4a3-972807a4f963

  If all goes well, it could work. Let us know the result after trying the steps mentioned in the link.

• I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and ch

  I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and chose paste, it was nothing. I then tried the same thing but sticking in a document of Corel. The same problem. It seems that the text has been copied, but I'm unable to paste it into another program. Is this real?

  Is it permanently available text? (Can highlight you)?

  This seems a strange way of working well - why not copied from the draw to Word?

• SharePoint Online enabled MRI 2013 does not have Ms Word 2010 document

  SharePoint Online enabled MRI 2013 does not have Ms Word 2010 document.

  This works on Windows8.1 and Ms Office 2010. However, we are facing problems with Windows 7 Service Pack 1 and Ms Office 2010.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Attach Word 2007 documents

  How can I attach a document Word 2007 (a form to fill out) in a section of Robo 9?  (I don't want to import and transform the shape of subjects).

  Just taking an assumption here - fix the doc in size luggage and then do either a link in a topic to him or create an IFRAME in a topic & referencing it in there

• Printing in Word 2007

  I just got an Officejet Pro 8100. I use VISTA and Office 2007. For this, duplexing for the Publisher and for the pdf files. But no offer for WORD print duplex.

  I followed various suggestions and checked the boxes and still can not solve this problem.

  Any help welcome,

  Thank you

  David

  I changed the Page order 'Forward to the rear' and all of a sudden, it works!

  Thanks for your help.

  Best

  David

• HP Pavilion Notebook PC g7: MS Works9 does not recognize a word downloaded document.

  After upgrading 8.1 victories to win 10, I found that the MS Works 9 program was not to recognize the word files that I downloaded from email.   When I open the file, I get a message that explains how should I buy a Microsoft Office program.  I deleted the existing Works 9 program and reloaded the program from the disc supplied with the program.  My computer continues to ignores the fact that Works 9 is available and directs me to the purchase of MS Office.  I don't have this problem when the computer was running on 8.1 WINS

  Otherwise, the program of Works9 works perfectely with 10 wins.   Any help would be much appreciated.  Bill

  Hi Worahm,

  I think that your question is about the default application that opens your file type. I recommend you change the program that will open your file Works 9. See the Windows here support page to learn more about changing the default value. If Works 9 does not appear in the list of programs of your choice, go to the Choose default program, and then find the file on your C: drive.

  Please let me know if it works. It seems that when you upgraded, some default values have been lost.

• Word 2007 your AutoCorrect, MSO1033.acl, file could not be saved. The file may be read-only, or you do not have permission to modify the file.

  To get this message when opening Word 2007.

  Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.

  ALSO when I try to close or save a Word 2007 I get this message:

  Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)

  I then click on Cancel to not save the changes and then get the following message appears:

  Changes have been made that affect the model overall, Normal. You want to save these changes?

  I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started

  I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not

  Thank you!!
  Frustrated in minutes

  Install the fixit from article KB2258121 (fixit #50461).

  Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.

• After that 13/08/09 update, Word 2007 will not open files

  This morning, my Vista Ultimate computer had restarted after the installation of updates.  Now, I can't open attachments to emails or Windows Exploere Word 2007 documents.  Also, I can't get an insertion point to work within an open document.  I can use the keys on the keyboard such as Tab to navigate, but not my mouse.  I threw a few batteries perfectly well when it happened first, thinking it was that, but my mouse works in other programs now except Word.

  Word 2007 Enterprise can always open a document, if I first open Word and go to the list of recent files.  But I can't use my mouse.

  If I try to open the exact some files from Windows Explorer, it does nothing.

  I already checked the file associations and ensured that any attached Word ran by looking in the Task Manager.

  There is no problem at all before these updates.

  http://screencast.com/t/5szlSFIwqgn Screenshot of the updates that have been made.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word

  They will help you with your Word problem in the Office discussion groups above.

  See you soon. Mick Murphy - Microsoft partner

• Windows Update makes my Word 2007 not operable

  Last night, I was working in a Word 2007 document information transfer to another program from him. The detected Windows icon appeared in my taskbar. I does not pay attention to the icon of update of Windows and in about a minute or two my screen erased and then in a phase 3 update of Windows. When the updated, the Word document is returned to the screen. The program was closed as I was transferring information by Windows I assume that the work has been lost. Anyway now when I open my Word 2007 I get a program not responding do not error. I have the installation for Office CD, but I don't know if that will fix the problem as it will be the same word that no longer works. I really think that Microsoft should not perform these updates in this way because he would have been the same if I had steeped in my PC and left the open note. Everyone should have the last word when their computer is being updated. After all, it's a mine not Microsoft or any other software company. I lost a lot of work and I do not have a program of orocessing of words. You can not get a response from Microsoft without a product ID. It is not just great for trying to get into a program they made trash and will not open. Someone at - it solutions that they can suggest to solve my problem.

  Hello Jim Morecraft,.

  Thank you for using Microsoft Vista answers Forum!

  I understand your frustration regarding this issue; I will do my best to put your PC to work again. Since the issue you described in your post, said after Windows update, I would recommend that we start with the help of the System Restore tool to restore the computer to an earlier point in time before this problem started. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type System Restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click choose a different restore point, and then click on Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  5. the computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Second, you can configure Windows update to where you decide whether to perform the update or not.

  If it is a problem of update, the best way to solve this problem is to apply only updates one at a time to determine which updates is causing this problem.

  Click on Start -> all programs -> Windows Update, click change settings in the left menu. Select download updates but let me choose whether to install them, click OK. When you are alerted to install a new update, this window, click on view available updates, uncheck all updates and select one at a time, install it, restart your computer, test and update. Once you find the update either continue to ignore it, or look for it at http://support.microsoft.com/

  You can also post back with update KB number, you are having problems with.

  If please reply and let us know if your problem is resolved or if you need further assistance.

  All the best...!

• Documents Word 2007 open but will not appear on the monitor.

  When I try to open existing Word 2007 documents or start a new Word opens but won't that appear in the lower shelf. When I click the icon in the lower plateau, on what reached the document quickly slides off the screen to the right--and out of sight. I'm traveling to the Brazil and have been able to use BrOffice.org to access to and use, my documents. I have Windows 7 Ultimate, but did not bring my Office 2007 disk with me. I scanned for viruses and spyware, and there is not.

  Thank you

  Perfectionseeker

  Please repost your question in Forum Word to: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads where experts in Word will be happy to assiist you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Converting my document in word 2007 to PDF my PRINTDATE macro no longer works, (macro does not convert to PDF)

  We have a Word 2007 document that has a macro PRINTDATE active and works correctly.  Converting the document to PDF the macro is no longer in effect.  Is it possible to have word macros converted in PDF document?

  No, you will need to recreate it using JavaScript.