Brightness problem with aspire switch 10

Similar Questions

• Problems with aspire switch SW5-012 10

  New to the community. Just bought an Aspire SW5 - 012 Switch 10. Upgrade to Windows 10 before use. We use Office 365 with Onedrive for storage. After a week, the machine connects to the wifi, but not the internet. I ran 10 Windows diag on connection and got "wifi is not the valid IP configuration". I could get it to make the connection if I went to the command prompt and did; ipconfig/release and then ipconfig/renew. I discuss with Windows 10 tech, to see if problem with Windows. He clearly had me Winsock, Tcp, Int and reset. Nothing has worked. Then he told me to uninstall the network adapter driver and reinstall. Once I did, I can't go past media disconnected (State of the media). Everyone has problems of this kind. We have (badly) need this tablet to work.

  Problem solved! After posting here, I found a blog, Geeks in Phoenix, who gave the commands to reset the network card. I followed their instruction and it worked! We're back in business. How to reset the network adapter in Windows 10: go to the administrative level command prompt and run these four commands. netsh advfirewall reset, then enter. netsh int ip reset, then enter. netsh int ipv6 reset, then enter. netsh winsock reset, then enter. Restart the computer to complete the reset. I'm guessing that we had something change in the firewall settings, in the configuration of the adapter. The Windows 10 technician, that I have chatted with earlier, couldn't do that to me.

• Problem with GS716T Switch

  This morning we plugged a phone Avaya IP (5621SW) to our network. It synchronized to the top, as it was supposed to, but we started to receive calls on PC hide. After some research, it seems that all PCs connected to a GS716T switch indicates no network connection when the phone is connected. Unplug the phone and turning the power on/off switch everything returns to normal. No other Netgear switch have been affected. We have replaced the GS716T with another switch (not a GS716T) and connect the IP phone has no effect. Wondering what it might be on the GS716T which makes it sensitive to the IP phone? Any thoughts?

  Hello Kelley,

  Well, this isn't the configuration that I expected. The model number of the phone was 5621SW, so I thought that the connection is PC > phone > switch. I tried searching a few cases reported on the GS716T and did not find anything related. This problem is, I should say a little weird, since they do not use the same switch. But let's start the update of the firmware.

  We will wait for your update.

  Thank you

• Brightness of the display on battery walk brighter. Acer Aspire switch Alpha 12 SA5-271 - Q 55, 6

  Acer Aspire switch Alpha 12 SA5-271 - Q 55, 6

  I am running the latest version of windows 10.  I noticed that when the Tablet is a stack when I opened a window, like a file Explorer, the screen will brighten up about 3 to 4 more brilliant after the opening stages of the window.  Turning off automatic mitigation does not affect this.  He disobeys on battery.  Any ideas?

  Thank you

  Catherine

  IIRC the last version of Windows gradually reduces the brightness of the screen when it is on battery. Opening a window to bring it to normal, how it will start again dimming.

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• Problem with LOV Switcher

  11.1.1.2 ADF + ADF BC
  
  Hello
  
  I have a problem with the list of switch values, missing a piece of the puzzle
  
  In the object view I have:
  
  a notation attribute that has 2 lov defined for it - lov_a and lov_b
  a Type attribute which can have a value of 1,2,3,4 or 5
  a passenger attribure LovToUse which has the following expression: Type == 3? 'lov_a': 'lov_b '.
  
  In other words if the Type is 3 I would like lov_a to show otherwise, I want lov_b.
  
  I created an a jspx to edit and change the data in my view object.
  
  The attributes and the Type are on the jspx.
  Type is an autosubmit and side has a partial trigger on Type
  
  The idea is that when the user changes the Type via the user interface rating will change his lov depending on the Type.
  
  The problem I have is that when Type is changed to note without changing his lov because I guess the LovToUse attribute is not updated / refreshed.
  
  How to refresh LovToUse when Type is changed through the user interface and that is all I have to do to get note to use the correct lov?
  
  Concerning
  Paul

  You may forget to set the dependency of your attribute LovToUse.

  Check this box:
  http://adfpractice-Fedor.blogspot.com/2011/02/ADF-BC-multiple-lovs-for-Vos-attribute.html

• problems with the switch to outlook

  Since I changed my hotmail to outlook my computer runs more slowly, in an e-mail its jumpy and erratic, when I connect first to send the page looks like html with blue bars highlighted then I disconnect and reconnect and then send load, outlook does not work properly, I am running windows xp home edition 2002, service pack 3 , pentium (R) 4 cpu 200 ghz, 1.99 ghz 512 MB of ram, 2 hard drives 1 for 1 of the data for the operating system. never had this problem with hotmail, can I uninstall and reinstall outlook because I know that hotmail will disappear

  RS

  You must not use Outlook.com, there are other emails on the web.  For your number current okease try this

  Have you tried to access your account using a different browser or computer?
  The same problem occur?

  I recommend that you clear your browser cache and temporary internet files to ensure that they are not causing your problem.
  This is often caused by a corrupted in the browser file.

  Please delete your browser cookies by following the instructions on the link below:
  For the Internet Explorer browser: press CTRL + SHIFT + DELETE, and then click on remove
  For Google Chrome: Simultaneously press CTRL + SHIFT + DELETE, and then click clear browsing data
  For Firefox: Press CTRL + SHIFT + DELETE, and then click clean now
  (other browsers are similar)

  For a great experience, you need to update your browser to the latest version and make sure that the latest version of Microsoft Silverlightinstalled   and running for browsers that support it.

  Outlook.com is optimized for the following browsers: Windows Internet Explorer 8, 9 and 10; Google Chrome 17 and higher; Firefox 10 and higher; and 5.1 on Mac Safari.

  Outlook.com is good on the following browsers, but some features may not display properly: Internet Explorer 7, Google Chrome 5, Firefox 9 and 5 and Safari 5.1 on Windows or Safari on Windows and Mac 5 and 16.

  Outlook.com is not supported on the following browsers: Internet Explorer 6 and higher, Google Chrome 4 and higher, Firefox 4 and higher, Safari 4.x and more.

  Wanikiya & Dyami-team-zig-zag.

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with NI Switch Executive - test Panel

  NI Switch Executive - Test Panel, I connect routes I created previously, which are then displayed to connected, without error. However, the corresponding relay is not activated (what I mean by monitring DMM). Using NOR-SWITCH Soft Front Panel, I can make the same connections and everything works fine, no idea why connections are not deployed in the Test Panel?

  Here is what I use:

  PXI-1033 on a PCIe bridge

  Matrix 4 x 32 PXI-2530 switch on slot 3

  PXI-4071 DMM on slot 2

  Hi DeadMeat,

  Looks like the NI PXI-2530 is simulated in the IVI configuration.

  OR Switch devices Executive virtual peripheral references by their logical names.  Each logical name to a Session links pilot Max (Measurement & Automation Explorer).  A setting in the pilot Session allows you to simulate a device.

  I recommend to open MAX, expand the IVI Drivers > driver and check the general tab that the fake it with the drop-down list selection is set to do not simulateSessions.

  I hope this helps!

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• problem with aspire menu start v5-122

  Hi, I just bought this acer v5-122 a week ago and I'm still learning to use it. the problem is, it does not display a start menu in the screen is just blank. What should I do to return to the start top menu?

  Murray, my first reaction to take it back to the store while it is still under warranty.

  However, you can get to the desktop? Did you save the machine? If you can get to the desktop, install the free program of the classic interface to get a start button. Then do a scan in depth with your antivirus. Then install the free Malwarebytes program and do a scan in depth.

  If none of this works, you should definitely take it back.

• Problem with Aspire-e1 - 571g very bad!

  MY pc:

  i5 - 3230 m 2, 6hgz with turbo booost

  710 M 1 GB Vram GeForce

  4 GB ram DDR3
  750 GB HARD drive

  HI guys,.

  I have this pc already in a few months, but in the last two years, I have a very worryingproblem. When I play a game, all of a sudden the game (no matter what type, anyone...) begins to run I bit slowly, and happens at the point where the fan, like gives a boost to a will and while the fan, that's how the problem persists. It doesn't stop when the fan gives fresh impetus and goes back to normal. The fps are for example in my 20s 30 but when this problem occurs he cuts up to 15, 13, 10, 9... !!! This problem occurs with games online (BF3) but also with the normal games...

  Can someone help me?

  You must install additional software to monitor the temperature of the system - the GPU/CPU temperature.

  Your problem is caused by overheating. To fix it, the simplest method is to buy a cooling pad. It will reduce the temperature to ~ 10. Your laptop is a middle class "multimedia". It is not designed to load heavy/games. I have 1 single fan and cooling system is not suitable for playing games.

  You can try MSI Afterburner and a cap of fps for your games - this will reduce the load. Plaing also try the games in lower resolution/settings. It allows you also to the temperature of the gpu too in one of the corners of your game. This way, you will see when the temperature becomes high then you can stop the game to avoid damaging the system. 80 c temperatures are bad... and you'll probably get a way higher than that.

• Problems with the switch statement

  There everyone,

  I tried to build a page with 4 buttons. Each button is a symbol that contains 2 png´2 who are the drawings of the key. If you click on the button 1, he has to move on the screen. If you click it again it should back off. and if you click on another button button1 is active then button1 should return to the starting position and button 2 should come on the screen.

  I use a switch statement and a variable.

  composition ready, I used

  sym.setVariable("current","");

  to set the Variable

  each button (one of the png within the symbols), I used:

  var = sym.getComposition.getStage.getVariable ("current") courses;

  switch (current)

  {

  case ' ':

  SYM. Play ("in");

  break;

  case button1:

  SYM. Play ("out");

  break;

  by default:

  sym.getComposition.getStage.getSymbol (current) ("out") .play;

  SYM. Play ("in");

  break;

  }

  announcement each animation buttons are labels for the entrance and animation. There are also triggers that change the current variable on the stage

  sym.getComposition.getStage.setVariable ("current", "button1");

  If I test inside a browser and click the button nothing happens.

  I m what do not know my mistake.

  can someone help me?

  concerning

  Mr.Monsen

  Hello

  Some errors of syntax in red:

  class var = sym.getComposition () .getStage () .getVariable ("current");

  switch (current)

  {

  case ' ':

  SYM. Play ("in");

  break;

  case "button1":

  SYM. Play ("out");

  break;

  by default:

  sym.getComposition () .getStage () .getSymbol (current) ("out") .play;

  SYM. Play ("in");

  }

  sym.getComposition () .getStage () .setVariable ("current", "button1");

• Acer Aspire switch 10 - Wi - fi randomly stall

  Hi all, I have problem with my Switch 10. The internet connection drops frequently. It is followed by the icon of signal strength showing "Limited." I then turn WI - FI off and back on and it recognizes not all networks at all. I then go into network settings, run the troubleshooter and it does its thing, re-creation of the NIC and then informs me that he could not find a subject. After you reset the adapter it works fine again.
  I tried unistalling and installing the most recent drivers, but the problem persists. The problem lies in the adapter itself or the driver. My adapter shows as being REALTEK and I have read similar problems with the Broadcom card, which makes me think that the driver is the source of the problem here. Someone suggested that the Bluetooth was the cause of a conflict, so I removed the bluetooth and it made no difference. (I have re-installed bluetooth. All the drivers are more recent.
  My switch is not even a month and in this case one or two times a day. and I'm close to return the product. I like it, but can not put up with an issue as important as the internet randomly passing. Any help would be great.

  If in the last 24 hours, not random dropouts network, which leads me to believe that he will deliver certainly just a pilot.

  For those who have questions, and I know that there is a little bit, the last Realtek network card driver is version 3007.7.915.2014 dated dated 13/10/2014.

  Now Acer has the driver 3007.2.0702.2014 and shows a date of 26/11/2014.  This is not normal, and I suspect that this is the date that acer put it on the driver download site, as internet research shows its release in August of 2014 date.

  To get the latest driver, search for it using the version number on the net and find a link to your download happpy from where as me download a driver finder program (there is a little, but I used pilot identifier) and it will find the download for you.

  For those looking for a Broadcom driver, an internet search revealed a number of drivers later than shown on the download page of Acer.  Once again the research pilot program lists a number of drivers later, so give it a go and see if it helps.

  Hope that helps anyone who suffered this issue.

  I just hope it does its work without a hitch.

  

• Problems with networking

  Hello

  We have a vmware infrastructure still in version 4 on a HP Blade Center works for a few years without problem.

  However, 2 days ago, we noticed the VMS has been very slow. We have reduced the problem of network connectivity, even if we do not find what is the problem.

  On VMS, if we try to ping another server (inside or outside the confines of the blade), it loses a large number of pings. Ping by the ESX host everything well without loss of ping.

  This happens on all esx servers 4.

  On the other servers blades on the same box (blades not with hypervisor installed), we don't see any problems, and they work very well. The affected only blades are the esx servers.

  No changes were made to the environment that could have an impact on the virtualization servers, nor there was any firmware update, patch or sw in this infrastructure.

  Do you have any suggestions on what this could be and how to perform troubleshooting on this issue?

  Thank you and best regards,

  Hi all

  Thank you for your help. We have already identified the problem. It was a problem with the switches on the blade case. Raise them solved the problem.

  Kind regards

• Problems with the driver of the sensor on the windows 10 x 86 with the Acer Aspire Switch 10 E company

  Hello

  I installed windows 10 x 86 business on my Acer Aspire switch 10F, because there were 10 x 86 host windows install before and I couldn't get into my computer in the domain. Now, the computer is in the domain, but I have problems with drivers. I tried to install all the drivers that are on the site acer for my Acer Aspire switch 10F. And then I did the windows updates, but I have 2 drivers that do not work is the one whose name is "Kionix sensor Fusion device" and the other whose name is 'Micro Capella CM3218x ambient light sensor. Without these drivers, I can't activate the automatic rotation for when I want to use my device in the form of tablets and I can't use the automatic brightness for display.

  can someone help me please? Thank you.

  Sellion

  The answer of the Acer support is that this computer is not done for the company and it will never be drivers for the HOME version of windows 10 x 86 version.