Aspire E11 guard lock, ran the scan with Trend Micro House Call and no malware found.

Similar Questions

• Print the Scan with Lion 10.7.5 and HP Photosmart B210

  Help train the community would be very appreciated.

  I have a 20 '' mid 2007 iMac with a hardrive upgrade

  2 GHz Intel Core 2 Duo processor

  4 GB 667 MHz DDR2 SDRAM memory

  ATI Radeon HD 2400 XT 128 MB graphics

  Software Mac OS X Lion 10.7.5 (11G 63)

  HP Photosmart more B210

  Yesterday during the attempt to analyze a doc, for the first time the scanner would not work.  I don't remember to make the recent software updates, but I can do it.

  Since that time, I spent 8 hours scouring the Apple and the HP Forums looking for and trying solutions.  With the software update on my iMac, all software is up-to-date.  I have a reinstallend HP software and their updates.   I uninstalled and reinstalled the printer drivers.  I deleted

  During these 8 hours, I was able to scan a doc once, but could see the doc in the HP Scan 3 window and could not properly size 8.5 x 11.  Again, I could see the doc, but at this moment it would be printing.

  Many solutions suggest I can get Print Scan in system preferences.  While all other windows are available in system preferences, when I click on print scan the 'wheel of death' round and round.  This morning I left it run for 3.5 hours and never connected.

  Can't find the right solution to this problem.  ... Help please.

  How long is the USB cable? I know that sounds flippant, but too long of USB, cables can cause some problems.

  The only other thing I can think to set up the wireless printer, if it's possible for you. I don't know if it will work, but honestly, I started scrapping the bottom of the barrel now until we can try.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The latest update of firefox is not compatible with trend micro security and people with disabilities, it's when I clicked on install. How to bring back my trend micro?

  I downloaded a firefox security update. When I clicked on install (or apply), I was told it disabled my security from trend micro, and there is no version compatible with trend micro. He told me they keep control and let me know what is available. NOT GOOD. I paid a lot of money for my trend micro and want it to be functional. Help! I didn't click on finish. Does that mean the upgrade is not installed and that trend micro still works?

  I seem to have fixed that by going to the site of Trend Micro and upgrade to the latest version of Trend Micro Titanium 2012 V5.0. It uninstalled the previous version on my computer and then install the latest version. Trend Micro is working now and I can browse with Firefox. The upgrade was free.

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• When I try to use the webcam with Skype it blocks Skype and said "Skype has stopped working, windows is checking for a solution."

  Original title: lifecam 3000 and Skype does not?

  Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks

  Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)

• Firefox has issues with trend micro compatablility

  When I downloaded Firefox 4 he told me she had some compatibility problems with some parts of Trend Micro. Trend Micro has been my security of choice for the past six years and I'm not change because she saw perform very well. There is apparently no patches for the two issues being a toolbar, and I do not remember the other. I would like to know if these two problems affect my safety.

  Check the availability of an update for Firefox 4.0 with Trend Micro. If they are installing extensions in Firefox, it is for them to keep these compatible extensions Mozilla publishes new versions of Firefox. Really, you should postpone the upgrade to a new version of Firefox until you check with Trend Micro on this situation.

• Repeat the Scans with DAQmx read/write

  Hello:

  I use DAQmx vi to generate signals on channels ao0/1 a reading of the signals of the channels ai0/1 a card NI USB DAQ of 6251. I do this by using the read and write of vi and a trigger vi. This vi will run successfully for a single analysis. Now, I need to be able to perform multiple scans with the same settings but separated by 5 seconds or more. When I click on Scan, the vi analysis. However, when I click scan again once it does nothing and I don't know how to scan again.

  The vi VU RAMP MOD (not included) is simply used to generate the shape of the signal.

  Thank you!

  
  

• Problems scanning with c6150 all in one and Windows 8

  I have a new touchsmart from HP running Windows 8. I have an old printer c6150 all in one. I downloaded and installed the latest software and drivers for 64-bit Windows 8.

  I feel, copy and fax without problems. But when I try to scan, it freezes. It starts to scan and then just stops responding. I have to use Task Manager to quit the program. I tried the scan doctor and he says that there is a driver problem and it cannot communicate with the printer.

  Help, please.

  I solved the problem. The USB cable from the printer was not quite long enough to reach the back of my all in one computer, so I bought a USB extension cable. That works fine for normal printing, but apparently only works well for scanning.

  Once I connected the printer directly to the USB port on the computer, the scan function worked normally.

  Emilio

• No scanning with hp PSC 1410 printer and a Mac

  I used an all-in-one hp PSC 1410 with a PC running Windows XP and everything worked fine.  Now, I had to connect it to a Mac and I can't use the scan function.  I think that the driver is installed in my Mac does not include the scan function.  I looked for a driver on the hp site and everything I found was drivers with all functions only for Mac OS X 10.6.  My Mac is Mac OS 10.5.8.  Where can I download a driver that includes the function of scan to my Mac?  Or do I have to by another hp all-in-one?

  Have you tried this?

• Why am I unable to print from the web with Firefox (my favorite browser) and it market with IE?

  Hi, thanks for your time! I have problems printing from FireFox. I use PayPal for print shipping label (I sell on Ebay) and he's a few weeks that I have to use IE to print from the Internet. Nothing is printing from Firefox. And since it is my browser FAVORITE, it's boring. I have the latest Java, reinstalled my drivers (uninstall and install fees). I've tried everything I can think of, but nothing seems to work. Update Java, reinstalled drivers for my Epson Styllus NX215, change USB port, cleared cookies and all things... It works with Internet Explorer. I have to use Internet explorer to print from the Internet... Can you help me to not use IE anymore?

  (o) thank you.

  I use a computer MDG with an Intel CoreI7, with Windows 7 Home premium (64-bit) SP1, 8 GB of ram

  Thank you very much, I already did. It didn't work... the problem is solved by uni at a standstill and re-install Firefox. (the update does not work).

  Thanks anyway
  Stephan.

• Disconnection from the WiFi with Android 3.2.1 and AT200

  Hello

  I'm in France, and I got my new AT200.

  The problem is in Wifi (and update my tablet with ICS, I posted another topic). If I am far around 5 meters access point, I lost the connection: with other devices such as PC or Galaxy S2, signal is perfect!

  So no idea why my wifi connection is lost? Is this a problem of my Tablet?

  Thank you very much in advance for your help and support.

  Best regards.
  Robin.

  In this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67706&TSTART=15

  The app "Fixer WiFi" is mentioned.
  It seems to help some people with their WiFi connection.

  My access point (WRT54GL) is a floor above the place where I usually use the Tablet and I had no problems so far.

• Problem with the registration with EPOS2 24/5 data and LabVIEW

  Dear community memebers,

  I tried a few examples from the library of the EPOS and I would like to know how this sample works and works to save the data.

  

  Idon't ' tknowwhatdoestheparameters, thatthereareindecircle, means.

  I would like to draw the Position, speed and acceleration. Somebody can explain to me how it works? and what is the function of the numbers in the cluster?

  Thank you.

  Best regards

  Xavi

  Hi Xavi,

  You should ask Maxon to explain their software. Or read the manuals they offer...

  Motors with a logic generally use a communication scheme registry. You write to register to set parameters, you read some registers for current parameters/values of the engine. Each cluster in this array describes one of these registers/parameters, such as the first with registry address x 6064, x 0 and d4 value. These settings seem to resemble specifications CANopen CiA!

  I can't open this VI because it's the version of LabVIEW, but probably you will find labels on the control of entry of this Subvi. Read the labels...

• Configure the vlan with SG 300 - 10 p and 520 SA

  Hi all

  Forgive my ignorance, but I need help with the basic configuration.

  For a small office, I bought an appliance of security SA520 (for future VPN with another remote desktop) and a switch of SG 300 - 10 p to connect 3 PCs and 3 IP PHONE. The SA 520 is the router. I have to configure 2 VLANS on the switch:

  VLAN2: DATA (for PC)

  VLAN3: VOICE (for IP PHONE)

  VLAN1: BY DEFAULT.

  How can I configure simply all ports?

  I would like to configure ports 1-4 on 5 to 8 ports and VLAN2, VLAN3 and G10 port is reserved for the SA520 router.

  I want to split VOICE and DATA network.

  I think I need to create a trunk on G10 to SA520...

  Can someone help me?

  Hi Julien,

  OK sounds like you use it vlan by default for network management and the vlan 2 for vlan3 for voice and data.

  I use a calculator for this, my SA520 is ready at the present time.

  Step 1   On the SA520 add vlan 2 and vlan 3 and label them voice and data respectively.

  

  Step 2. Allows you to use the switch port 4 on the SA520 as a port to shared resources to the SG-300.

  (my intent is to use vlan1 not tagged vlan tagged 2 and vlan tagged 3 on the uplink of the switch and the SA500.)

  To do this, I have to say the SA520 port 4 of the switch will be in trunking and not access mode.

  

  You will need to check the membership of vlan 2 and vlan 3 on switch port 4.

  Step 3.  Now add a few IPS to VLAN2 and VLAN3

  Step 4.  Create DHCP scopes if that is what is needed on the SA520

  

  So now I hope that we have the SA520 with the associated IPS VLAN1, VLAN2 and VLAN3

  We also have the switch port 4 as a network interface

  We are vlan1 reproducing unidentified and vlan2 tag and tag to the SG-300 switch vlan3.

  We do the opposite on the SG-300 switch.

  If you use G10 as the uplink to the SA520 you'll notice of default port 10 must already be in trunk mode.

  Switch ports G10 should be marked for vlan 2 and labelled for vlan3.  It will be, default Gi10 untagged for vlan1.

  Make sure you keep ports switch is correctly set up.

  Best regards, Dave

• I accidentally put to run the exe with adobe PDF viewr files and can't find how to cancel it

  I was running an exe file and accidentally did something and now he's trying all the files with the adobe PDF Viewer running and I can't undo. Help, please.

  See this tutorial.

  http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html?filter [2] = file Folder settings