Need a break and then resume the script

Similar Questions

• Determine the end of the month and then run the script

  Hi all

  OK, I'm stumped. I can get all kinds of data to date... but I did not find a way (or the same example script) that shows how to retrieve the end of the month.

  
  Why?

  
  I have a master script that runs as a scheduled task. It runs every day and call other scripts based on the date. It is great for things like weekly reports that I just used $dow = {get-date}. DayofWeek but I need to run scripts at the end of the month.

  I can something together that gets the day, and then performs a logical ugly pop-based < or > but I don't know there's a smoother way to do.

  As always, any help greatly appreciated.

  See you soon

  Hello, medalklector-

  One way to do it, it is described by RMToups, Jr. at http://activelydirect.blogspot.com/2011/01/determine-last-day-of-month-in.html.  You should be able to set the output to fit your needs.  How does do for you?

• How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume with the rest of the inspection?

  New to Labview and NI Vision in general here.

  How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume testing?

  I want my inspection to execute algorithms on the acquisitions of two different images, where the break to change the settings of my DUT.  I thought that the breakpoint was working well when I'm in the configuration interface and I run the State, but it seems that when I run the inspection he jumps on the breakpoint and continues on the next stage of the inspection immediately.

  Are you running Vision Builder AI on Windows or on a remote target? If you have a remote target, which?

  On Windows, you can use a step of user input in the last tab of the Vision Builder AI tool palette.

  It will display a dialog box that is paused the inspection until you click on a button.

• Unable to wait 30 seconds and then call the TCL Script as Action?

  Hello and good afternoon all!

  I was browsing through different threads and did some research and I am unable to get my applet to wait 30 seconds and then call a script TCL to a succession of 'action '.  Here is the Basic script I am trying to run:

  Event Manager applet track-loopback1
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 1.1, «config t» cli command
  Action 1.3 cli command "event manager applet-counting backwards.
  action 1.4 cli command 'event timer countdown 30 '.
  action 1.5 cli command "action 1.0 wait 30.
  Action 1.6 cli command "end".
  Action 1.7 cli command "tclsh Loopback1 - Notification.tcl.

  The goal of this applet is simply wait interface Loopback1 go down, and then launch the applet "-Countdown ' which waits 60 seconds before calling end my TCL script.  The pattern of ' countdown time 30 "and the" action 1.0 wait 30 "is my (lack of?".  :-)) understand that after counting 30 I need to a trial of the action - but I'm not 100% clear on this?  Ironically, he does, in fact, call the TCL script, it does not wait 30 seconds.  My current workaround is to simply throw a statement "after 30000' in the TCL script, but I'm really curious to know why it does not work as expected (well, as I expected to work anyway!).  Any help would be GREATLY appreciated.  Thank you very much!

  See you soon,.

  Travis

  See my response to https://supportforums.cisco.com/discussion/13009231/eem-applet-wont-fire... .  What you do not work, so you should not call tclsh to EEM anyway.

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• E-Machine with XP when you don't use shutsdown. Hard drive stops but starts when the mouse moves. But XP does not start. Need to unplug and then plug in and start the PC.

  ' ' I get the error message 'A' recovered from a serious error report = ' BCCode ea BCPI 8507b6e8 BCP2 869 B 7800 BCP3: 869 B 8378.  Included files: "owner\locals\locals ~ 1\temp\wer9274." DIR00\MINI 121909-02mp "Hope someone understands. I keep the hard drive running to collect the info from my weather station.

  Go into Control Panel, then Power Options.

  On the power management tab, what is your power mode? Below which correspond to the parameters for this method of power - to turn off the monitor, hard drives & go standby time of the system.

  If you want to keep the hard drive, scroll down the drop-down lists & select "Never" turn off hard drives and the day before.

  Go to the Hibernate tab, and then remove the tick in the enable hibernation check box.

• Hi, I use iTunes 12.3.2.35 on a Windows 7 computer. I don't seem to be able to import files from a CD that contains the files on it as mp3 files. If I launch iTune and then put the CD in, it doesn't appear and I can't drag and drop.

  Hi, I use iTunes 12.3.2.35 on a Windows 7 computer. I don't seem to be able to import files from a CD that contains the files on it as mp3 files. If I start iTunes and then put the CD in, it doesn't appear and I can't drag and drop.

  It would not seem like an audio CD, as a drive in this way is a data disc when it contains mp3 files. You would need to access the file menu in iTunes, manage files here. If you manually manage music, you will need to access it as a regular folder on your computer. In iTunes, go to file > add file to library, and select individual files.

• Call the function in LabView from a DLL, and then access the global variable of DLL

  I've created a DLL in LabWindows with a function and structure.  I want to call the function from LabView and then access the overall structure.  I am able to call the function in the DLL with a "call library function node" and has access to the return value, but I can't understand how to access the overall structure.  The structure is declared in the header DLL with __declspec (dllimport) struct parameters file.

  Is it possible to access this structure without using the library of network variables?

  My guess is that you need two bytes of padding after "in_out" and another to two bytes of padding after "anin."  The reason being that ints are 4 bytes, and most of them C compilers will align on 4-byte boundaries.  The struct will naturally start to such a limit (in fact, in Windows, it will probably start to an 8 byte boundary).  If you then count bytes in your structure, you are 70 byte after "in_out."  70 is not divisible by 4, so you need 2 bytes more to reach the next 4 byte boundary.  You can also you could reorganize your struct so that "anin" follows "in_out" and this is probably the best option if it won't cause you other problems.

  Unlike most C compilers, LabVIEW compressed structures as closely as possible, without filling.  I don't know enough about the history of LabVIEW and internal parts to explain the reasons and to do this performance penalty, but, as choice of LabVIEW "endianness", it is probably a remnant of the first versions of LabVIEW that were running on the Mac.

  If for some reason you want to force your C struct to match package LabVIEW, you can use the #pragma pack (x) directive, but I wouldn't recommend that here because you can control the C and LabVIEW.

  EDIT: in the cases where it was not clear, add padding to your cluster of LabVIEW, insert appropriate size or items at the place desired in the cluster.

• How can I back up my computer, and then delete the unused programs to speed up my computer

  would need a guide step by step for me to do it properly.

  PML had to jump into a second :)

  go to start, Control Panel, add/remove programs, wait to fill the list, and then to the right, choose Delete to any program you don't want, after the withdrawal if he is not asked to restart, then restart the pc.

• read xml files in the directory, and then extract the words from their

  I looked in the forums of LabView for a problem similar to mine, but I succumbed to find advice, I need.

  Some time previously, I wrote a LabView program to build a dictionary from an array of strings.  It was really just a list of words that I used to make a crude search engine.

  Now I try to repeat this experience.  However, I'm stuck at the first hurdle.  I have a directory containing a number of folders and files, including .xml files.

  What I have to do is read the individual words in the xml files and then merge the words in a large list.  From there, I should be able to make the dictionary, and I hope that my old search engine still works with the new data.

  The attachment shows my unsuccessful attempt to create a VI that can first index all files in a directory (what it is) and then list only files ending in ".xml" (which it does not).

  Any advice on how to get my word out list would be greatly appreciated!

  Adam

  Is that what you are looking for? (See attached image VI)

• If I drag and drop a program of (F) and (C) and then remove the program on (F)?

  If I drag and drop a program of (F) and (C) and then remove the program on (F)?

  It is called: C_Drive.V21, there 2 905 088 KB.
  I have no idea what it is or does, but I'm trying free space on disk (F), so can I remove the disk (F) it?

  It is not "a program".  Assuming that the last character is actually a tiny 'eye' (i) instead of a number 1, it's a Symantec Ghost image file (some versions).  Do you use ghosts?  Have you used the ghost?

  If you still have Ghost installed, you can probably use to investigate on what is in the file.

  Check the date of the file.  If it's an image of your C drive for a long time, maybe you don't need more.

• Put into hibernation, and then restart the two computer sending to a complete stop

  Totally out of the Blue yesterday (20 December 2010) my laptop running XP Pro SP3 with full updates developed a need where Hibernate (via the shutdown menu and pressing the on/off switch) sends the computer to a complete stop after briefly posting the 'Preparing to Hibernate' screen but is progressing not not to the Windows XP screen. Similarly, Restart completely shuts down the computer and does not restart automatically.  I checked, disarmed and reset the settings to the hibernation effect power management.  Any ideas?

  For aand Stand By issues of hibernation, I always start with video dirvers.

  Can you think of changes in the field of video drivers since finally things worked?

  So far, all we know is that you have a laptop computer with Service Pack 3.

  It is good that you have SP3, because there were some problems with Hibernate and Stand By fixed in SP3.  You can read about them here:

  http://support.Microsoft.com/kb/946480

  If you want to see what you have now, or if you have problems later, follow these steps:

  Usually and easy to check and correct, is the video drivers for your system that must be downloaded to your global manufacturers Web site. Download the correct (recent) video drivers for your graphics card, install the correct video drivers, reboot your system, and then test.

  If you can not know how to check if your video drivers are correct, may not know how to get to the World Wide Web of manufacturers or can not know what to do then, maybe we can look at it for you if you provide more information.

  What is your system brand and model?

  If you are not sure what you have, or need another set of eyeballs on it, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete it.

  This minimize back Q & A and eliminate guesswork, trying things and assumptions.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there.

  Original title: need help with wordpad problem

  When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?

  Hello

  ·         What happens if you use another application to preview before printing?

  ·         You are able to print the document correctly, or you receive no error message when printing?

  You try to use Microsoft Word or Notepad to check if you face the same problem.

  First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.

  If Yes, then the problem is the document.

  You may need to clear any formatting, that depends on where you copied from.

  Your rule of printer drivers print preview