Need a G729 wav file

Similar Questions

• I can really play a WAV file, that I have loaded on my Clip +?

  Hello, I can't tell clients and/or manuals if the WAV files are supported and can play on my new Clip +. I load a wav file, but I can't seem to play. I went to the folder view and tried to play, but nothing happened. Is picked up, and, if so, do I have to follow a specific convention to name the file?

  I know it is a great MP3 player, but I have a specific need to play WAV files.  We strive to save a band on a small portable recorder (Zoom H2) and I would like to insert the card in the Clip + to leave the band and others hear recording (rather than reading on the Zoom - it wears the batteries).  We would use a micro SDHC with adapter for Zoom.  We will not have a laptop to help and there is no stereo system to play something on - for those who are not options.

  Any advice would be much appreciated.  It's our very first MP3 player, and pilot error is very likely.

  Thank you.

  I received the following information from Edward Mariano to SanDisk support:

  The Sansa Clip + saves files as. WAV files and would be able to play on the player. However. WAV files that are transferred to the Sansa from a different source player would not work. The Clip + does not support. WAV files originating from a different source.

• Why MATLAB cannot read wav files OR? Mind wav compression errors.

  I write, 1-n-channel, 24-bit wav files using the standard vi OR its file Open/Close/Write (DBL) found in LabVIEW 8.6\vi.lib\sound2\lvsound2.llb. This application data are acquired from a NOR-9234 via USB-9162 or NOR-cDAQ-9172. My wav files are readable by many readers of wav, including media player file (channels 1-2), SoundForge, and my own readers of LabVIEW wav file. However, MathLab is unable to read these files, saying they cannot deal with compressed wav format. As we read in the documentation of NOR, these files are decompressed. I found a player wav to header via the discussion forums and read my wav file. The compression code that was printed was-2 instead of 1 for uncompressed. Anyone had similar problems reading in MATLAB? Someone knows something about the importance of a - 2 for compression? My guess is that there is a word size problem here that MATLAB cannot process or NOR is not properly function.

  Well, I learned a little more since last we spoke. The standard MatLab wav player is wavread.m. This script must be able to read multi channels 24 bit files; but he does not read files from LabVIEW. We find a change to this script, called wavexread.m, which was developed to read wav files that use WAVE_FORMAT_EXTENSIBLE. This format was developed by MS as an extended format to write multi channel + 24 bit files with more information included. LabVIEW wav files are readable by MatLab via the use of this script. Basically the script ignores formatting as if the compression for the PCM format setting was set to 1 (instead of-2 or, as we know it, "FEFF"). I tried rewriting the file binary wav and replaced the "FEFF" with "0100". This file is readable by the wavread.m of stock but not the wavexread.m extended; hiliting besides the fact that MatLab do not really care.

  However, I'll throw this back order to ask whether it is really necessary to use the extended format to write these files when the standard format would be sufficient. It sure would have made life much easier if my client did not need to worry about this.

  Thanks for your help.

• Add data in the header of a .wav file

  Hello guys,.

  I seek your help for a small problem that I can't spend during my internship.

  Here's what I want to do: I acquire signals that I write a .wav file. What I would do then is to reopen this .wav file and add data in the header, such as the sensitivity of the microphone for example. I am doing this is because it's one of our program of works, it can resume the pressure vs time signal using this information. I already have the hex code I need to add, but I was not able to determine if such a thing is possible or not after a day of research ideas would be greatly appreciated. I wonder if Matlab might do the trick but I prefer to stay with the 'normal '... screws

  Thank you very much for your help.

  To insert data into the middle of a file, you will need to rewrite the entire file after that point, as Gerd said in the linked post.  I would do the following:

  1. Search for the location you want to put your new piece
  2. Read 65 000 bytes from forward and store in a local cache (shift registers work well for this, or just a wire at this point).
  3. Write your new piece, taking note of how long it is
  4. Give your data buffered less the length of your new song
  5. Read a 65 000 other bytes and put it in a new buffer
  6. Write the end of the old buffer and a part of the new buffer until you get to 65 000 bytes
  7. Repeat 4 to 6 until you reach the end of the file
  8. Update the offsets in the header to match the new locations of piece, since you have moved things

  You can probably do it with both data pads in a pair of registers at offset in a loop.  The 65 000 bytes is chosen for best performance.  You can use other sizes, but your speed can suffer.  Let us know if you encounter any problems.

• Cannot modify the properties file or Tags on .wav files

  Recently, I noticed that you cannot change the property information or the tag of the file on file .wav audio as you can do it on other types of audio.  Either using the file explore. change the properties or advanced in WMP11 tag editor, all the fields are grayed and shelter directly editing.  This is not the case for all other types of audio files, I tried.

  Curiously, the fields are editable by WMP if you can manually find Album Info or just edit the individual fields directly in the screen of the library.  Unfortunately, it is not acceptable, because it means that you can not change at the same time, more than a single field in a single file and then only if this field is represented as a column in the WMP library.

  It seems very strange to me; This seems to be a limitation in Windows itself, since even the file Explorer will not let update you the file properties (for example, title, subject, author, comments, etc.).  I really need to save as the original .wav files so they can be changed later (and not lose the content of compression), but I have no way to correctly annotate files!  Does anyone know of a way around this?  Thanx

  (Using XP on multiple computers - same problem on all of them.)

  Hello V7Goose,

  I think you'll have to come back to apply 3rd party to do what you are looking for.  Otherwise, it will take forever to tag your music one by one.  There are some that you can make a search that may be free.  I just found this one, I don't know if it of good or not, I wanted to give you an idea of what is out there.

  http://easy-tagger.software.informer.com/2.1/

  See you soon

• Prerecorded Wav files

  Hi all

  I'm trying to find a Wav file to use at the end of a LabVIEW program that prompts the user that the test is over.

  I use the LabVIEW VI but I'm looking for a pre recorded the wav file that reads "Test is now completed.

  I have had a look on Goolge, but I am unable to find a suitable file.

  Can someone provide my with such a wav file or point me in the direction I could find one?

  Thanks again

  Cally.

  You can always create a using a synthesizer as here.  http://www.research.att.com/~ttsweb/TTS/demo.php

  There are a few other online as well.  You will need to look at the problems of license, if you have a commercial application.

  As food for thought, I built once small tester of vision where the customer wanted to audio signals for past and has no parts.  I tried a few different voices.  But in the end, everyone hated the voice.  So, we went to standard Windows sounds.

• I get error C00D10D1 in Media Player 11 to play a .wav file.

  original title: I am getting error C00D10D1 in Media Player 11, running XP Home. try to play a .wav file. Suggestions? Thank you!

  I get this error message, "an audio codec is needed to play this file. To determine if this codec is available to download on the Web, click Web help. "(I think it's C00D10D1 error?).  Using Media Player 11, running XP Home while trying to play a .wav file. Suggestions? Thank you!

  Dale

  Hi DaleRuss,

  Yes, there are 3rd party codecs available and can solve the problem. Be carefully what (x) you download from.

  NOTE: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• WAV file labels

  Hi people,

  I wonder if there is a solution for my problem with wav files.

  When put the wav lossless in the Fuze + (I use the latest firmware) marks of the order of the songs in an album appear to be lost/mixed up like a punctual but permanent shuffle.

  Under the tabs 'Artists' and 'Albums' the order is reverse or random (shuffle is off). However, under 'Files' order of the pieces is correct.

  MP3 works without any such randomization.

  Any ideas?

  TIA

  I use EAC rip my CD too, but I save the file to your computer first, rather than directly on my player. That way if I need to change, modify or otherwise change anything with the file (like a bad tear, for example) I get all supported before transferring to my players. To add album art, simply put a JPG of the cover image (you can use Google images to find them) 300 x 300 pixels or smaller. Name it 'album art.jpg' or 'folder.jpg' and save it in the folder of the Album alongside files FLAC. Now, the player displays this image during playback of files in this folder.

• How to change the VOC to wav file

  the voice of the logger files when downloaded .voc format and won't play in windows media.  You will need to change it to .wav format.

  Hello

  Please use your favorite search engine to find a converter that can be used to convert the .voc files to .wav file type.

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also: http://support.microsoft.com/kb/316992

• Huge problem, cannot delete the WAV file.

  I have the WAV file on my desktop that I can't move, delete, rename or the properties view.  It is a way by using 100% of my CPU and slow down at all.

  Whenever I try to delete it, it says "preparing to recycle...". "and never finished.

  I'm about to reinstall my operating system because I don't know any other solution.

  Hello

  Run the check point kill too extreme.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• If I rip a cd track to a wav file then change it to mp3? v

  HI - if I rip a cd track to a wav file then change it to mp3?

  Just reply to this and the site crashed!

  Anyway Hi (new)

  Yes - but you need third party software - why not tear as a wav in a separate Directory and tearing then as mp3 in your usual library? If you need help in choosing a different location back to me.

  Seasons Greetings - R

• WAV files creating raw bytes

  can someone tell me what are the APIs used to create the .wav file from the bytes saved... there at - it jar files I need to import into my plugin eclipes BB...

  Please if someone knows, answer me...

  In fact imporing javaasounddemo (jar) file may work, I didn't try it yet... but I am facing difficulties in importing of jar files in my project of BB...

  Please any idea, answer me back...

  It is a very popular request.  Well so I added the code to do it for you in this knowledge base article

  It will take a day or two to appear there, pending attachment code seems to be accissible (and I hope that the link does not change until the revisions I did to publish - if it refers to article I mentioned).

• Corrupted .wav file?

  Hi all!

  Recently, I searched for a music that I could use for a video. I downloaded some of soundcloud.com and they have all worked fine except one.
  This file is a .wav file, it seems to be impossible to remove!
  Every time I have try and remove or delete this file, it appears that:
  
  And will NOT delete. This is a currupted file, and if so, how can I remove it?
  I don't know too much about computers, so if you could give me an answer I could keep up with, I'll do so!
  If you need any more details please ask :) Thank you!
  Kade-

  Download, use this:
  http://www.emptyloop.com/Unlocker/

• Smartphone blackBerry, opening of wav files attached

  I have an Ooma phone system which automatically sends a wav file to me to any message received. I was unable to find a way to open the attachment in my BB "BOLD". I can highlight the attachment and tell him to open, but then I get a "can't open the type of file" error message. Is this something I need a third-party software? If so, any suggestions that you?

  Hi Otto and welcome to the forums!

  This refers to the unit of Cisco, but the important part are the codecs used to generate the

  .wav file. You can run this past you guys of telecom:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15191&sliceId=SAL_Pub...

  Also if you have configured as a BES (company law) phone, this may apply.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12919&sliceId=SAL_Pub...

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you 

• WAV FILES

  I'm working on for my Codian 4500's and MPS800s custom wav files.

  Problem I have is I create .wav and download it, but it does not work.

  For the codian, I guess that it is looking for voice_prompt_first_participant.wav of file name?

  The format that he needs is not compressed, mono, 16 kHz and 16-bit resolution.  My option of voice of windows 7 is 16 kHz, 16-bit, 1-channel, but don't say no compressed?

  I also a few tens of window, but it does not define the recording under 2 voice channel 16 bit 44100 hz (CD quality)...

  Question is what are the critical parameters and length parameters to get the wav file to work...

  I also if I register on the 10 windows machine I convert m4a to wav and if I save on windows 7 I need to convert wma to wav...

  Any idea of a more effective way to make wav files?

  VR

  Chet

  For a free audio tool, it's more than perfect:

  http://sourceforge.NET/projects/Audacity/

  This has worked very well for all my audio use case and is available for various operating systems.