Need a good contrasting color to RGB 163/210/81

Similar Questions

• Need help with the color picker please

  OK, I'm green to the illustrator cs4 program. But I know it's a setting somewhere that I am missing, just not sure of the correct to check or change place. When I create an image, select the following color hex #0039 6 to use as a background color, when I save the image, the colour of say's: 1F429B

  why it converts it and how do I change to not do this?

  cswd,

  To keep the color, your file > Document Color Mode should not be RGB, CMYK.

  In the CMYK color Mode, when a color is outside the range of CMYK, it will be changed to the color (I hope) best equivalent within the CMYK range.

  Of course, if you need to print CMYK color, you must work in CMYK mode.

  Exclusive Web / another screen use, stay in RGB.

  If you need both CMYK and RGB use screen printing, you will get (usually) different appearances unless you start in CMYK mode.

• Need settings for base color for the Web (graphic) design

  Ok... I know there are 1 million different threads on the topic and found confused me too much on the subject.

  I'm looking for just standard (not detailed) on setting up the color scheme in photoshop CS5 to design my web graphics.

  I work for a small business that color management is not a huge problem, but want to start somewhere.  And if someone can give me the web layout of basic color settings (maybe even a palette download link) for the PS to help me get started, it would help a lot!

  Thanks in advance for any advice

  I would first profile your gamma of 2.2 the monitor profile. D65/6500 or point native white.

  A package of material is recommended for this task (a washer that reads the screen).

  So try these settings in Photoshop (Edit > color settings):

  

  Try these settings and save it with a unique name.

  These settings will give you a warning dialog opening if your file does not have an embedded ICC profile, or if the profile is different from that of sRGB.

  Always 'Use embedded profile' and then convert to sRGB when necessary.

  If your file does not have an embedded profile, Edit > assign profile (sRGB is a good try, then Adobe RGB, ProphotoRGB...)

  Leave your setting Save For Web (SFW) by default.

  This will automatically convert sRGB and the profile of the band...

• Need a good Antivirus software, free to download

  I need a good free anti virus protector downloaded suggestions please

  * original title - please help *.

  Hello

  Avast is also a very good FREE anti-virus

  http://www.avast.com/free-antivirus-download#TAB4

  also at this time you need additional protection, even with a good anti-virus

  Most antivirus programs leave a bit to be desired when they try to protect you against all malware

  Use Malwarebyutes Anti-Malware for additional protection

  Download and use the FREE version

  http://www.Malwarebytes.org/MBAM.php

• trying to run Windows 7 on my computer, but I need a good video card that can support Aero

  Hi, I am trying to run Windows 7 on my computer, but I need a good video card that can support Aero. I would like a card that can run games too. Does anyone know a good AGP video with at least 256 MB of RAM?

  I just installed Windows 7 temporarily so I have a work desk. I have a new copy of Windows 7 was waiting when it is nearing completion, and I will install my new copy after I get a graphics card and processor for it.

  Also, I was looking for some video cards and I found some but I would like some opinions on them. And I would like to know if they're going to run Aero.
  MAP 1: JATON 3DFORCE FX5200TV GeForce FX 5200 128 MB
  MAP 2: EVGA 512-A8-N403-LR GeForce 6200 512 MB

• Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Please help :)

  Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please

  Guess that's your logo. His place of 1000px

  

  Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the

  opposite of white

  

  And then resizing the image size under Select image menu and place values expanded in the dialog box

  as below.

  

  That's all. It may be useful

  Terri

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  Select the reference image and choose window > secondary display > Magnifier (locked). Now the image you want to change, and start working. You can refer to the secondary display window while you work on the image you are editing,

  If you have a second monitor attached, the entire second monitor may be the secondary display.

• Conversion of PDF color (in RGB)

  I discovered this how to convert color to RGB using the API of Acrobat pdf pages in a custom plugin and Acrobat Pro 10:

    
          PDColorConvertAction colorConvertActionStruct = (PDColorConvertAction)malloc(sizeof(PDColorConvertActionRec));
       memset(colorConvertActionStruct, 0, sizeof(PDColorConvertAction));
  
       PDColorConvertActionType actionType = kColorConvConvert;
       colorConvertActionStruct->mAction = actionType;
       colorConvertActionStruct->mMatchAttributesAny = -1;
       colorConvertActionStruct->mMatchSpaceTypeAny = -1;
          colorConvertActionStruct->mMatchIntent = AC_UseProfileIntent;
       colorConvertActionStruct->mConvertIntent = AC_UseProfileIntent;
       colorConvertActionStruct->mEmbed = true;
       colorConvertActionStruct->mPreserveBlack = false;
       colorConvertActionStruct->mUseBlackPointCompensation = false;
  
       AC_Profile rgbProfile;
       ACProfileFromCode(&rgbProfile, AC_Profile_AdobeRGB1998);
       colorConvertActionStruct->mConvertProfile = rgbProfile;
  
       PDColorConvertParams colorConvertParamsStruct = (PDColorConvertParams)malloc(sizeof(PDColorConvertParamsRec));
       memset(colorConvertParamsStruct, 0, sizeof(PDColorConvertParams));
  
       colorConvertParamsStruct->mActions = colorConvertActionStruct;
       colorConvertParamsStruct->mNumActions = 1;
       colorConvertParamsStruct->mInks = NULL;
       colorConvertParamsStruct->mNumInks = 0;
  
       ASBool *changed;
          PDDocColorConvertPage(pdDoc, colorConvertParamsStruct, 1, NULL, NULL, 0, NULL, changed);
  
       ACUnReferenceProfile(rgbProfile);
  
  

  the problem is that I get an error reading the memory violation to this line

  ...
  PDDocColorConvertPage(pdDoc, colorConvertParamsStruct, 1, NULL, NULL, 0, NULL, changed);
  ...
  
  
  
  

  in fact when it performs color conversion.

  Is there a reason because I get the error?

  Thank you very much

  Solve you the pointer reference, that we mentioned? If this isn't the case, it's just what I expected.

• I need help on the colors in first pro.

  I need help on the color in general information.

  http://www.YouTube.com/watch?v=vLEGtzyZ0Fs

  I made this video in AfterEffects and exported in color 16-bit png sequence.

  I then imported in first pro and added audio and some titles at the end.

  Now, I want to do is have a perfect version that I could watch on my pc.

  I used Mp4 h 264 to compress the video and it is on youtube.

  I think that this compressor support only 8-bit color because there are bands in the sky.

  Now, I have to make a version which is of very high quality that I can watch on my pc... I tried several codecs and it does not work.

  The problem is so long that there something on top of the png sequence in premirere pro as an image or something, it's like

  the displacement of the image in 8-bit color mode.

  It's using Avi Lagarith lossless codec

  Before there is a picture on top...

  

  Just after that, the image appears... As you can the there are a few bands on this image.

  I know it's subtle, but I want to know why this is happening.

  

  Is there something I'm missing... I took much too long to try to fix this.

  I ended up using the Quicktime animation codec for my video. The problem does not occur with this one, and I can't see any decline in the quality of the image.

  Now, I have a file compressed at low cost for online viewing and a huge file that I can watch on my computer.

  On a side note, can you guess how many hours it took for my computer make the png of this video sequence... 12 HOURS!

  Should I get a new computer...

  Thanks for the reply!

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• I need to replace a color on my image with a specific part of the image color.  How do I?

  I spent over 2 hours trying to figure out how to replace a color on a part of my image with a specific color indicated on another part of the image.  So far, I was able to go to "Replace color" on my version of Adobe Photoshop, but it seems that I can only change the hue and brightness of the color that it is currently.  I need to use a specific color, so this didn't help me.  Does anyone know how to complete the task that I refer to?

  In addition, please keep in mind that I use Adobe Photoshop 6.0, not a fancy cs version or whatever it is.  So it's fairly old school...

  Any help/comments are greatly appreciated!  Thank you.

  Hello

  In fact, you can choose a specific color using the replace color function!

  Go to Image > adjustments >, replace color

  

  Select the color you want to replace. Then, click on the 'Result' box in the section of replacement (see below)

  

  A color picker dialog box opens, where you can use the eyedropper tool to select a specific color in your image, or you can enter the specific RGB/CMYK values.

  

  Please post again if you have any other questions - I use CS6, but as far as I know, this process works the same for PS 6.0.

  Good luck!

• What is the best program or how to check an image on the monitor screen (contrast/color, etc.)

  Hello

  In ACR I adjust the image so that it looks OK to me.

  But there are a few differences in the cab and PS visualization of the image (color, contrast, etc.).

  In programs like foto-viewer of windows , there is another difference (compared to ACR and PS) > > images have more contrast and darker than the visualization in PS

  Another program Irfanview shows the image with less color (saturisation).

  I did a test print (in a center of the photo), this picture translates into something between Irfanview and Psalm

  Question:

  What is the best program or way to adjust the color / contrast, etc to make me a photo-image (on paper) which is the same as what I see on the screen of the monitor mij.

  Probably still a problem with color management.

  PS is color managed, will honor an embedded profile (or tag) in an image and to 'bend' the colors according to the color space of image and its supported monitor.  Check the color settings to see if / what that PS takes in what concerns monitor color space and image profiles.  Other programs are not color management and send the RGB values directly to the monitor.

  You can't see a difference if the image has an sRGB profile (or none), but that say a picture comes up with its Adobe 1998 color space.  Photoshop will honor but other programs will not, then you will see a net difference of saturation.  Adobe 1998 being a larger color space, it uses small differences between R, G, B to a saturation of the color indicated that would exist in sRGB, so seen in a managed application without colors, the image will appear less saturated than in PS.  And other "Pitfalls" that can cause the effect reverses.

  You must have a minimum knowledge of color management to be able to reconcile various appearance of the image between the various applications.

  Richard Southworth

• Color Gamut RGB or CMYK

  So I had this problem with Photoshop since I started using it on my Windows machine. On my Mac. I could put something in any color, and it seems to me like that on the screen in RGB mode. However, when I try and do it with the same exact color on my Windows machine, it appears black. I do not have the range of warnings on either. However, when I opt for the CMYK mode, the color appears. The problem with this is that I use photoshop for the GUI and such, not print material so if I show in CMYK Mode, it give me a vague look what the colors will look like.

  Could someone help me please!

  You have an AMD GPU?

  Have you tried turning off the GPU in Photoshop preferences? If it works, you probably touch a driver bug in some of their recent drivers.  The good news is that the drivers 13.2 beta fix the bug.

• Mac pro 4.1 with problem / contrast Color dell u3011

  I have a 4.1 MAC PRO 8-CORE 2.26 (radeon 5870) and use it with snow leopard and recently added the el captain on the second startup disk.

  for a monitor, I use the U of DELL 3011 via display port.

  I have problem with high contrast, even after calibration of the monitor with photo colormunky and since I want to use this game for photo editing is a huge problem.

  the only solution by chance that I found at the Leopard version is to use the TESt MONITOR EIZO and after closing this program everything happens here, it should be! When I open again the test, it looks appropriate to the levels of white on black r correct and distinguished colors are more natural and when I print it is exactly the same.

  unfortunate this model does not work at the start of the captain el drive so I had to ask for help in the community

  Check the settings of improved contrast.

  It is found in the system preferences.

  Depending on the version of Mac OS X, its name varies from random combinations of words such as 'Universal access' and 'accessibility '.