Need a laptop to continue my work

Similar Questions

• Close the lid on my laptop and continue to work on the external monitor.

  I am running Vista on a Dell Studio. I have connected external monitor. I would like to close the lid on the laptop and continue to work, but the com puter shuts off when I close the lid. I have a Dell Inspiron 6000 with an options for no action when the lid is closed.

  Hello

  Control Panel - Power Options - Choose top left - close cover.

  Also check the power Plans it after changing the Panel above - or to the right
  (White) Change Plan settings and also check the advanced settings.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Close the laptop and continue to work with external monitor

  Hi, I just bought a laptop HP15 and I want to work with an external monitor, keyboard, and mouse, but I have no space in my office for monitor and notebook open.

  The point is that when I close the laptop being the PC on, it shuts down suddenly and I can't continue to work.

  I can't find the way to establish that the laptop turns off when I close the screen.

  can someone help me?

  Thanks in advance

  Hello

  Let us hope that the next video help (very similar to Windows 7):

  https://www.YouTube.com/watch?v=ODxQchBckPU

  You can ignore the adv after a few seconds.

  Kind regards.

• my laptop Compaq Presario C700 work W/vista to 1.1/2 years, seems, I launch my recovery disk 2. I need to know my identical key windows product or need to re-register

  my laptop Compaq Presario C700 work W/vista to 1.1/2 years, seems, I launch my recovery disk 2. I need to know my identical key windows product or need to re-register

  Hello

  Most laptops have the product key on a sticker on the bottom of the machine. If yours is not readable, you should contact Compaq support: http://www.compaq.com/cpq-country/cpq_support.html

  You will not need to register your software. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Sound of my laptop HP continues to spoil

  My laptop sound continues to spoil after a while. I'll play the songs on YouTube and after awhile it stops for like a second and then comes back but plays sound when idling but everything else, other that sound is working at normal speed. Is there any fix to what I can do on my laptop, or what I need to get the laptop?

  Hey HmmZack,

  Thank you for the information. To begin troubleshooting to hopefully solve your noise problem. Please follow the steps in the document No. sound from speakers (Windows 8) . Now, I know that's not exactly the problem you are experiencing, but the steps still works for your particular issue.

  Please let me know if the audio troubleshooting cannot find any problems, but also what is the result of the troubleshooting steps.

  Looking forward to your reply!

• Work in offline mode, you are no longer connected to < servername >. You can continue to work normally

  Dear all,

  I get following error on my windows some machines xp with sp3.

  Message: Working offline, you are no longer connected to . You can continue to work normally

  then he must click again to synchronize, so we can print and access the map network drive.

  What can be the reason that I need your help.

  Concerning

  Naveed

  While you might get an answer in this forum, this could be a better place to ask your question...

  http://social.technet.Microsoft.com/forums/en-us/categories

  Tricky

• After downgrade from Vista to XP, laptop camera is not working

  my laptop computer camera failed when trying to communicate with Skype.

  * original title - one VISTA and down the slope to XP my laptop camera is not working *.

  Hi maiwashie,

  You may need to update the drivers for your camera after decommissioning. Read the following article about the drivers for XP:

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/finddrivers.mspx

  I hope this helps!

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of Windows 8: the Windows installation needs administrative privileges to continue

  Try to install that my digital upgrade newly downloaded to Windows 8, my installation was arrested whith error message "windows installation needs administrative privileges to continue" and the closed facility.

  I am upgrading to Windows 7 64 bit and I use a laptop Asus N80VC.

  Right-click the Windows 8 Upgrade Wizard, and then click Run as administrator.

• CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

  CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

  Hi neilm,.

  When you have disabled the cache, did you do via preferences > Cache Purge? Rarely, this method seems to work for everyone. It hasn't for me, because he never removes all hidden. But now press Cmd-Opt-Shift/Ctrl-Alt-Shift while launching Bridge and purge the cache and preferences will generally produce as clean a sweep as possible without going through the uninstall/reinstall bit. You need to configure your preferences for bridge all over again, but that shouldn't take too long.

  If this does not stop smash, return and let us know your OS is and what version of bridge that you use. CS6, but the numbers that you see when you click on the bridge.

• After effects Import vector continuously rasterize works not

  Hello.

  I try to import a vector in After Effects, and it doesn't work the way I need. Yes, I continuously rasterize lit. Without the file original Illustrator has no effects on it. I tried png, eps, psd files and. Same question.

  1. it's what GOT the original vector file looks like:

  

  2. This is what it looks like in AE with continuously rasterize lit, with 400% zoom. It's shitty.

  

  3 and this is what it looks like AE zoomed in to 100%, but I put to scale the image up to 200%.

  

  But I can't use the vector of huge scale for my project because it is too big for my computer. If anyone can help? My brain hurts.

  I realize that this shit in the observer of AE, but even after I have the export in HD, there always look miserable.

  Basically, I want to just a nice final clean air picture in my computer.

  Hey thanks for all those who can help you. Waves enormous karma coming your way.

  When questions like this just posted a screenshot of the result is almost useless in diagnosing the problem. A better screenshot would include the Comp window and timeline with the layer selected question and all changed properties revealed by pressing the U key twice. In addition, since it was an imported file is concerned, if the footage item is selected in the project Panel and then we can get an idea of the shape, size and other properties of the original file that can cause problems.

  You should not have to buy anything to get correctly created vector files it work perfectly in your composition. When you said zoomed to 400%, if you meant the scale factor and not to scale the layer so the behavior is normal, expected, and exactly what should be the case. 400% zoom factor means that the comp window uses 16 pixels of the screen for each pixel of the model. Magnification set to 1600% means that a single image pixel appears as a block of 16 X 16 pixels of the screen - so that things will look pixelated when they are not. The only way to judge the quality is to look at the compose window with the Zoom set to 100% factor. It is exactly how Photoshop works.

  Here's what I mean. A single layer of Illustrator selected, scaled 5174% and perfectly pixelated in a comp with the Zoom factor to 100% scale. Note the size of the layer in the project Panel. All we need to know to diagnose a problem.

  

• Laptop 15-AC121DX: touchscreen works do not under Windows10

  Got this new laptop yesterday, and everything works fine apart from the touch screen, is not running when started under win10, was phone with 2 hours support, did all the tests, the display works, but finally started it does not work, has managed to find the latest drivers on the egalaxtouch site, still does not work tried later MS MS catalogue, I guess I have to wait for a update or bring her back? like the pc, fast, pleasant and 6 GB 1 TB for 399, but no touchscreen, not a matter of circuit breaker but would be nice if it works properly... and support site when I choose my model it is stuck in a loop constantly ask for the model number...

  Paul

  Try to remove grey pilots and EGalax driver, reboot and see which installs Windows 10. Should not install a non-compliant driver.

• my laptop speakers do not work but my headphone works very well

  I have a laptop HP Pavilion 1d73us g6, and although my headset works fine the speakers are not. He is a recent problem.  I tried troubleshooting with the windows with no result troubleshooting tool. I checked all the audio drivers and they check fine. I tried the driver software without success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl

  Hello @hifive11,

  I read your post on how your laptop speakers do not work, but the headphones work fine, and I'd be happy to help you in this case!

  The first step that I recommend is to follow this document on the no sound on speakers (Windows 7). This should help to restore the sound from your speakers.

  You can also activate the speakers on your computer as default playback device. This is possible by following the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which will be the helmet of your laptop device). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. test your speakers

  If the problem persists, I recommend to you your laptop a previous restore point before the speakers stopped working. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• How to restore my email alert on my laptop that no longer works

  How to restore my email alert on my laptop that no longer works

  That one doesn't work?

  The e-mail alert or the laptop?

  If this is your e-mail alert, and if you hear the sound does not work, try this...

  Right-click on the Volume icon in the tray (right side of the taskbar) > select sounds > under program events, scroll down to the new mail Notification, click on it > under sounds, make sure that it is not to (NONE) setting.

  If this is the case, click on the pointer and scroll down and select Windows Notify.wav

  Click OK when finished.