After downgrade from Vista to XP, laptop camera is not working
my laptop computer camera failed when trying to communicate with Skype.
* original title - one VISTA and down the slope to XP my laptop camera is not working *.
Hi maiwashie,
You may need to update the drivers for your camera after decommissioning. Read the following article about the drivers for XP:
http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/finddrivers.mspx
I hope this helps!
Tags: Windows
Similar Questions
-
Downgraded from Vista to XP BUT AUDIO does NOT WORK!
Hello ~!
I have a HP Pavilion dv6500 laptop with an AMD processor. Recently, I got drowngraded of Windows Vista to XP by following the guide on this site, but not install the audio drivers (Conexant High Definition Audio Driver) and so I have no sound. It says "ERROR - Driver Installation Failed: could not be found for this driver MEDIA." The same for the Modem driver and the MS - SAU (I tried first by following the instructions). What should I do to fix this? =(
You use the part 2 of the Guide Downgrade XP drivers? Did you install Conexant using Device Manager as described?
-
Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP
Model - L300 Satellite PSLB8A-01F004
Australian model
Place of residence current UKHappy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter, which is the LAN and it does not work properly.
I have two points with one exception - Ethernet controller and Modem on Bus High Definition Audio device.
I find all the major engines of the Toshiba Australia but he lists three (I think) site possible WLAN - Atheros, RealTek, and one of the other manufacturers.
I tried all three without success but am willing to acknowledge that I can have a mistake, perhaps by installing all three drivers at the same time for example.
The indicator on the front of the box portable wireless lights on or off with the hard switch setting.
I am also unable to locate the display of all available wireless netrworks, this can be a symptom of the driver is not installed.
I tried to locate the wireless card, but it doesn't seem to be accessible through the background panels, including the Panel of RAM module.
Any ideas please?
> I have two Articles with one exception - Ethernet controller and Modem on Bus High Definition Audio device.
The Ethernet controller is the WLAN adapter.
I guess that the WLan driver is missing and so the wireless network card does not appear under network adaptersPlease check this Toshiba How TO:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78This will help you find the right WLan driver for this chip.
and here you can find the drivers:
http://APS2.toshiba-tro.de/WLAN/good luck and good news 2011 ;)
-
x 200 Wireless does not work after downgrading from Vista to XP - please advise
Information system: x 200 74553YG / Windows Vista business product key
Question: Used the recovery CD to downgrade from Vista to XP - downloaded all the drivers and updates to the operating system. everything worked except LAN wireless. Tried all possible ways to solve this problem (re download drivers)
Your support and recommendation are highly appreciated
so, there is no unknown device in the list? go into your bios and see if the wireless is turned on there or not.
-
I can not get my web cam lights up now, as I did, until I upgraded to the Tower of vista (32) to windows 7.
Hello
HP dv9000 Pavllion's system is not compatible with Windows 7, this is the reason that the Web cam does not work on the system, I suggest you to download the drivers for the Webcam from the link below and install it in compatibility mode and check.
See the article mentioned below to install the drivers in compatibility mode.
Make older programs in this windows version
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Download the Webcam utility from the link mentioned below (the software).
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Portege R500 - 4 unknown devices after downgrade from Vista to XP
Hi all
I've downgraded a R500 from Vista to XP Pro SP2 and installed all drivers from the support page in the correct order, even in the device manager are always 4 unknown devices called 'data Interface '. Their hardware ID is:
USB\VID_0930 & PID_1302 & MI_00\6 & 2EDD84F6 & 0 & 0000
USB\VID_0930 & PID_1302 & MI_01\6 & 2EDD84F6 & 0 & 0001
USB\VID_0930 & PID_1302 & MI_02\6 & 2EDD84F6 & 0 & 0002
USB\VID_0930 & PID_1302 & MI_03\6 & 2EDD84F6 & 0 & 0003All 3 USB ports operate normally and at full speed, the Interface of data got to be something else.
Thanks in advance for any advice or help
Hello
These are the modem and the features of com of your compilation in the 3G module.
Unfortunately the drivers are not available on the European download page now.
I guess it will take a few days until that pilots will be released.
Please see http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for this. -
Why after reinstallation of vista, no adobe flash player does not work.
Before a reinstall of Vista, I use Adobe flash player. Now, after having to reinstall Vista, Adobe flash player does not work. Can I get the videos to play?
Hello
1. try to watch videos online are you using Internet Explorer?
2. How do you reinstall Windows Vista on your computer?
3. what happens when you watch her watch flash videos?
4. have you installed flash player after you have reinstalled Windows Vista?
To work on the issue, refer to these methods.
Method 1:
If you are facing the question about Internet Explorer, see the following links.
The video problems when you use Internet Explorer
http://support.Microsoft.com/kb/2532294
Why Adobe Flash does not work in Internet Explorer?
http://Windows.Microsoft.com/en-us/Internet-Explorer/help/Adobe-Flash-not-working
Method 2:
You can check if uninstall and reinstall the flash player help.
Uninstall and reinstall the flash player and check if that helps.
Uninstall Adobe Flash Player. Use the link below to download the flash player uninstall tool. Follow the steps mentioned in the link.
http://kb2.Adobe.com/CPS/141/tn_14157.html
See section provided below for instructions on troubleshooting.
Troubleshoot Flash Player installation | Windows
http://kb2.Adobe.com/CPS/191/tn_19166.html
Note: The third-party products or services mentioned here are manufactured or provided by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
Hope the information is useful.
-
'Unknown devices' after downgrad from Vista to Windows XP on Portege R500?
I recently downgraded my Portege R500 of Vista installed at the factory for WinXP.
I managed to install without problem, and today I met an "unknown device" which I can't fix.The details of this device:
Location: on Interl 82801GBM (ICH7-M) LPC Interface Controller - 27 b 9
Device Instance ID of: ACPI\IFX0102\4 & 38462492 & 0
Hardware ID: ACPI\IFX0102 * IFX0102
Compatible ID: * PNP0C31If anyone can help, please help!
Hello
Have you installed the XP drivers all available from the European pilot of Toshiba page?
Please take the look in installation instructions txt file. You will find a list of all the necessary drivers that must be installed. The order of installation is important.
Please install all drivers as mentioned in the installation instructions.PS: On the page there is also an application of Infineon Trusted Platform Module.
Greetings
-
After downgrading from Vista Satellite L30-101 does not read DVD
Hey,.
Like many people, I didn't like Vista and so returned to the use of Windows XP.
In doing so, I lost a lot of things like the ability to watch DVDs and sound, most of these problems fixed so easily by downloading the drivers from this site.
However, even after the DVD driver download I can't read DVDs yet.
When you try to play through Windows media player I get say error message that I did not have a MPEG-2 decoder, in the section web site help, it suggests where to get one, but you have to play for each other.
After having one in the first place, I don't think I should buy a new one.If anyone has a solution it would be greatly appretiated if they could let me know.
Thank you
PS I have a Satellite L30-101
I think you have a codec problem, but I'm not sure. Maybe you should install the latest version of Media Player and codec Xvid, DivX and AC3. These are free (google it!). Or you can try alternative software, such as WinDVD or PowerDVD, you can try the demo versions.
-
Downgraded from VISTA to XP and RECOVERY no LONGER WORKS
I got my HP's Vista laptop you XP, recomposed scores, etc... But I don't mess with the partition HP_Recovery The, I didn't, except for the fact that it has a different drive letter now, and I don't know what was the original letter to drive... I have a HP dv9644ca laptop, and I can't use Recovery Manager... When my computer starts up, it says "Press F11" to use Recovery Manager, I press it and nothing happens, it countinues to start XP... I downloaded "HP Backup Recovery Manager" of HP, and when I try to restore fully my laptop, it says my computer does not have the partition I need, and to enter the recovery disks, which I did not, because I did not... Please... someone tell me what to do... I want to make my laptop as it was... someone can help me?
And another thing... I don't have a C:\ anymore, my Windows partition is E:\ what I did?
-------------
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01162251 & LC = on & DLC = in & CC = US β = en & product = 3554705 〉This means I'm screwed... Thank you for your help
-
built into the laptop, camera does not work
Original title: Enhed
Hello l have a portable acer. The problem is that my wecam inbuildt no longer works and l can't seem to find the problem. Please l need help
Thank you thank you
Hello
Check with the Acer Support, their documentation and online drivers.
Acer - USA - Service and support
http://us.Acer.com/AC/en/us/content/supportAcer - drivers and downloads
http://us.Acer.com/AC/en/us/content/driversAcer - worldwide
http://www.Acer.com/worldwide/selection.html============================
Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problemsVista references apply to Windows 7.
You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
everything for Windows 7.Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
the upgrade from VISTA to WINDOWS8 - BACKUP.1 does not WORK
UNTIL I NEW COMPUTER RUNNING WINDOW8 I MADE A BACKUP OF THE USB STICK 32 OF MY FILES ON THE VISTA MACHINE.
WHEN I TRY TO RUN PROGRAM BACKUP.1 IS BLOWS UPWARD LOOKING FOR 'MSVCP71. DLL? I LIKE THEM I'M THE ONLY ONENO ONE IN THE WORLD, WHO ATTEMPTED TO RESTORE THE SAVED ON THE VISTA FILES AND YOU WANT TO COPY TO WINDOWS8?Hello - for those who have a computer HP Vista MS, they provide a backup system that creates an .exe file called guess what? 'backup.1.exe' and a file 'backup2.fbw '. Try to use google next time and look it up!
Maybe you can Google to find an answer. When was the last time you could make a backup of an any other operating system and restore it on a newer version? Once you get this answer let us know.Guess what this backup is for HP computers running Windows Vista only! Maybe if you understand how works the backup program you wouldn't be so rough for those of us who are trying to help. But since you've already made your decision, you can Google how to do. Sure that no one here will help you now. Maybe HP will... for a price. -
No sound after the downgrade from VIsta to XP on Presario C712NR, Please help
After downgrading from Vista to XP SP3, my C712NR lost her completely. I can't find the driver for the conexant HD Audio SmartAMC HD2 map. Much appreciated if you can help.
Hello
MS-UAA for SP2 (required with a reboot before the Audio driver and Modem) here
MS-UAA for SP3 (required with a reboot before the Audio driver and Modem) here
Conexant High-Definition Audio here
Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
Not to communicate,
Install from a list or specific location,
Select don't search, I will choose the driver to install.
For the hardware Type select 'show all devices '.
Remove control "Show compatible hardware" and click on 'disk '.
Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reset. -
Downgrade from Vista to XP [DV2740SE]
Hi all. I do a downgrade from Vista to XP and I can not foud the drivers.
Can someone help me plese?
THX.
This Conexant posted to Skydrive is the same as the file Mediafire post by Mariza... which is, btw, his own personal discovery and seems better to work for a microphone. Get it if you have problems to Mediafire, like that sometimes.
I think that Mariza said the Install.exe can be executed from it rather than having to use the Device Manager.
-
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Did I lose my address book if I switch to Windows 10 W7?
I did when I went from XP to W7, and I don't want to repeat. Not smart enough to find how to back up my address book on my external hard drive!
-
How can I resolve to allow my financial institution show my monthly starement?
When I'm on the site and try to view 'statements', briefly flashes "loading", it does not. I can access with IE after letting the pop ups. Firefox does not have no choice.
-
I have a NX700 with a built-in wireless function. When I go through the Setup program tries to connect to the internet, he noted only that the wireless connection was working, and internet access and local access failed. Also, if I try to use a wired
-
Running on the video line basic VGA screen display changes.
Sometimes, when I discovered an online video like you Tube etc... the screen goes to a very basic VGA mode and I have to manually change the screen to its normal parameters. How can I prevent this from happening. I checked for updated drivers, and mi
-
Problem installing Microsoft Office 2007 Home and student
Hello I'm all new to Microsoft Office home & student, so this is a newbie question.I bought this product this morning and went to install it. He said it was impossible to configure error and immediately stopped the configuration. I have a trial MS O