Need advice on the protection filter and lens hood

Similar Questions

• Need advice on the recovery CD and Vista upgrade on Satellite M100-222

  I want to share my problem to get some tips. I got a laptop Satellite M100-222 Windows XP and Vista capable, then I got an upgrade to Vista and it works with few problems that do not recognize some programs.

  That's why I have some needs and need your help and support and they are as follows:
  1 - is possible to reformat using the upgrade of Vista, or need to reformat with XP first and then update with Vista.
  2 - I tried several times to start the CD, DVD (product recovery) to reformat the laptop. However it is said (operating system not found).

  Kindly enlighten me.
  Concerning

  With regard to the point;

  (* 1) * If you ONLY upgrade Vista CD, then it s necessary to start the first restore XP CD, and then upgrade to Vista.

  (* 2) * usually start from the CD/DVD recovery must format the HARD drive and need to install the new image of Toshiba. Please check if you have started since the right recovery CD! Don't mix it with the Express Media Player recovery CD!

• Need advice on the bluetooth driver and software download

  * Please HELP *: you have just bought a bluemicro Nexus pro bluetooth v2.1 dongle. and Ive has damaged the disc it came with when I was opening the package.

  The disc says: Toshiba bluetooth driver and software bluetooth BT1.2/2/0/2.1.
  Anyone know if there is a download for this online somewhere or I have to go out and buy another? I'm not clued up when it comes to computers and would be very grateful for any help and advice... I; m using windows vista so that it should be compatible.

  Download and support Toshiba page you can download BT Toshiba stack but it's for use with Toshiba laptops.
  You bought non-Toshiba product then download contact Nexus or visit the support page of Nexus.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• I need to format the hard drive and it won't let me because the program is running.

  Please help someone... I have a desktop running windows 7.  I need to format the hard drive and it won't let me because the program is running.

  Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it.  I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.

  Thanks for any help given, I'm desperate.

  Original title: help with windows 7

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• The radial and the graduated filter and filters spots do nothing but cast a shadow over the region. the settings do not work on them.

  CC in Lightroom

  27 "iMac

  Yosemite running

  just loaded CC in lightroom

  The radial and the graduated filter and filters spots do nothing but cast a shadow over the region. the settings do not work on them.

  A few suggestions

  Try to disable the GPU in preferences > performance.

  For filters, try to press O to see if it's the mask you are viewing rather than adjustments.

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing. could you kindly say?

  Hi all

  I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing.

  can't find any support by adobe regarding billing issues.

  anyone of you could help me?

  Thank you

  Inga

  Change in the information of credit card to join creative cloud

  (1) connect to creative.adobe.com.

  2) click on the manage my subscription.

  (3) to change my billing information

  For the invoice

  (1) connect to adobe.com

  (2) go to my orders and select the order number, print the invoice here

• Looking to intensify my t2i and need advice on the new camera

  I've been using my t2i and need help to decide what new device purchase.  I use a canon 100-400 F4. 5 lenses that I love.  I mainly shoot birds in flight and the nature.  Now, my camera did a great job, but I'd like something that looks better with a high ISO setting.  I only use the manual settings and love my back focus feature, so a new camera would also have this. My price range is less than $2,000.  All advice is appreciated.

  Go full frame will give a lot of artificial scope. Regarding the high ISO of 7 2, I saw some very impressive samples drawn by 12 800.

  http://www.FredMiranda.com/forum/topic/1356768

  http://www.FredMiranda.com/forum/topic/1355985

  You can work your way back through this thread for a lot of high ISO shots of different cameras too.

  http://photography-on-the.NET/forum/showthread.php?t=1308983&page=90

• Need help/advice on the upgrading GFX and power supply for PC p6754y

  Hi, I want to upgrade my computer (Hp Pavilion P6000 Series, model n ° p6754y) so I can play new games such as Skyrim or Battlefield 3 on ultra. I don't know too much about computers, and it would be my first time upgrading mine. Here are the parts I have in mind.

  POWER SUPPLY

  http://www.Newegg.com/product/product.aspx?item=N82E16817341017

  GFX

  http://www.Newegg.com/product/product.aspx?item=N82E16814102908

  Please let me know if it works well with my computer or if you have other recommendations/tips instead.

  Thanks for the help

  Hello

  The power supply and the video card must be inserted.

  Try this link is your PC ready for BF3?

  Most PCs are not ready for BF3 and there is usually a faster video card and a bigger power supply.

• Need advice from resizing of photos and save the selection

  Hello

  I photograph the new employees and post it on our intranet. Whenever I take a photo with the same camera and the same distance. I import the image into Photoshop Elements 8.0 and resize it 2592 x 4608 pixels to 800 x 1422 and then I make a rectangular selection that shows only the head and neck. Then I cut the image to a new file and try to resize to 100 x 145 pixels, which is more suitable for our intranet. Usually this method works, but sometimes it can be very time consuming.

  Is there a better way to accomplish the same task? Is it possible to make a selection that is exatly 100 x 145, save and reuse the next time?

  Try using the crop tool. First select the tool and choose custom from the dropdown menu; then enter your dimensions in the boxes in the options bar. In the resolution box, type 72

  Drag the crop on your image tool and then click in the middle of the outline of the rectangle and position your image so that head and neck appear in the sketch of the harvest.

  Tap the checkmark to confirm and save.

• How about using labview vi of the filter and multiply vi to replace the analog filter and amplifier

  Hi all

  I use a data acquisition system to acquire a weak signal, it seems to a voltage amplifier and low-pass filter before the acquisition of data. I was wondering, if I use low-pass of the labview vi of the filter and multiply vi to process the signal picked up by DAQ, can I get the same effect as the analog low-pass filter and amp?

  Thank you!

  No!

  1. any system of sampled data must be band including prior to sampling in order to avoid aliasing.  It is impossible to remove aliasing after collection.

  2. the resolution of the DAQ system will be so low that you'll very 'fat' scanning and you will lose a large part of the information in your signal.

  Sorry, but you need to amplify and filter in the material before the data acquisition device for best results.

  Lynn