Need advice on which component use

Similar Questions

• need advice on which version of Dreamweaver to purchase

  Hello.  I need advice I can buy it on which version of Dreamweaver.  I have an iMac v. 10.10.5.  I want a monthly fee, want just a one-time software purchase so that I can build my own personal Web site

  Creative cloud is simply a distribution model & payment.  You always download & install the software on your computer as you always have.  You always save the files on your local hard drive, you always. Nothing has changed in this regard.

  CS2, 3, 4, 5, 5.5 is no longer supported or sold by Adobe.  If you buy software from another source in line do so at your own risk.  The pirated versions were circulating these last time and they do not work.  In some cases, they contain malware that could compromise your computer.

  You have a modern operating system.  This is another reason to use current software. Several older versions required Rosetta which Apple is more included in its press releases.  Purchase of old copies similarly ligit software does not mean that it will work on your system.  Let's face it, the stuff you used 8 years ago are useless today because Apple & Win continue to change operating systems.

  I use a little media with DW CC.  It is a very fast, modern code editor.   In fact, Adobe will soon integrate DW CC 2016 version supports.

  Nancy O.

• Best network design... Need advice on the best use of NIC

  I'm new to the concept of Distributed Switch so I need advice.

  Our current environment is the result of a vCenter 4.1 and ESXi 4.1 Enterprise Plus, but we are just using the standard vSwitch (1 for vMotion/Console and 1 for virtual machines).  When the distributed switch came out, we were warned that a vDSwitch could cause us problems if the server vCenter or database is down.  We could not connect directly to the host and make network changes because the vDSwitch is set in the database.  That's why we stayed with the Standard vSwitch only.

  Our farm is quite small, only 5 hosts but we run around 100 mV in this regard.

  We use currently servers HP DL385 G7, which have 4 cards integrated network, and we have a map of installed NETWORK 4 port card.

  I use the NETWORK 4 EtherChannel ports and trunk card to our virtual machines.

  I am currently using only 1 network card integrated for vMotion and 1 for the Service Console and they all have two of the other defined as secondary.

  This configuration has worked very well for us, but I realize that the latest version of ESXi has some new features that we could use.

  NEW CONFIGURATION

  I'll put up a new vCenter 5 and ESXi 5 environment and I am considering using the switch distributed instead of the usual vSwitch we use.  I'm also eager to take advantage of the multiple NIC vMotion.  All our cards are 10/100/1000 MB capable... No. 10 GigE.

  I think... use that map 4 NETWORK ports for my EtherChannel/trunk for just as our virtual machine before, but this would be set to vDSwitch1

  The mixture of my 4 other integrated ports, it's causing me grief.  Should they be on a standard vSwitch or vDSwitch?  Use 2 ports for vMotion and 2 for the Console?  I really thought to use 3 ports for vMotion and 1 Console port.  I could put the Console port to use one of the vMotion ports such as adapter of standby is... I'm so confused freaking!

  Any recommendations on how I should put up?

  Hello

  Given that you can't split your vmnic for each vSwitch I would recommend either keep configuration simular with the knoweldge if a whole nic fails, you will take a failure or as autumn has already been mentioned on 'Origin Port ID'. Lets do this out and give a little better example

  Current configuration

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  vSwitch1

  VMNIC4 - extension PCI NIC - Etherchannel trunk - PortGroup - VMNET

  Extension VMNIC5 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC6 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC7 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Now, to captured to eliminate any single point of failure that you could do is break your Etherchannel trunk and back this vSwitch from Port ID and Setup VMNIC2, VMNIC3, VMNIC4, VMNIC5 as vSwitch1 for your VMNET. Then the cable to multiple switches eliminate any single point of faiulre. If your standard configuration would look like this

  vSwitch0

  VMNIC0 - on - Board Service Console

  VMNIC1 - Board - Vmotion

  VMNIC6 - extension PCI NIC - Vmotion

  VMNIC7 - extension PCI NIC - Vmotion (standby Service Console)

  vSwitch1

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  So to finish any request for psyhical nics on this particular configuration the Port ID of origin essentially around robins. If during your first VM is online it will be use VMNIC2 and nic forever, until a failure, in which case he will grab the next nic online. When your second VM is online it will use VMNIC3 forever, until a failure and so on. This still will give you around the same way through to as far as networking is concerned. However if you are attached to the trunk, etherchannel 4 GB and can obsorb a failure in case of failure, the network card 4 ports can stay.

  Distributed switching Setup

  Allows you to see how you can switch to distributed switching

  Let's start first of all, you can have EVERYTHING in switches distributed even the service console port if you wish. The resason why some people do not like to do this with the service console port is because IF your database is broken you cannot make any changes to the distributed switch. However it will not prevent a feature to your distributed it switches simply means, you can change them. Also if just getting worse and your DB has been declining for some time and you REALLY need to make a change to the service console port you can go into the console and change back to a standard vSwitch if need be. This allows the said look at some standard configs, you can work

  vSwitch0 (Standard)

  VMNIC0 - Service Console Port (Port Original ID or standby)

  VMNIC4 - Service Console Port (Port Original ID or standby)

  vSwitch1 (Standard)

  VMNIC1 - Vmotion

  VMNIC5 - Vmotion

  Distributed switch

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Now this config using originating port ID and breaks your etherchannel if you want to keep your configuration with the etherchannel it can look like this

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  Distributed switch

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Other changes to the configuration may also put the vmotion in distributed witch the VMNET but you would to VLAN, or you could create a second Distributed switch and put it as long as there are 2 network cards. It can go either way. The main advantage of a distributed switch is that it brings all of your settings with you in any host. So trade ect all your VIRTUAL networks is really easy to reproduce if a new host is brought online, all you have to do is to add the new host network cards in the distributed switch and your config is done. With that in mind lets look at the service console. This console is always configured on EACH Setup program that out you of the box if not that you really need to have these parameters transported on several hosts that is another reason why most people just don't. VMotion is up to you, I have seen and configured two ways, it all depends on how simple you want to keep it or think of switching / vlaning / port of groups.

  If you have any questions please let me know, I hope this has helped

• Need advice on the page using framework Bootstrap makeover

  I'm idling try hover over a Web site to a site more reagent which can be seen on multiple devices. The original site has been designed to 780px wide. On a single page are 32 members that are configured as actions of reversal with name (normal state) and 'contact me' (hover state) which will open a document by email to this member. It's a little dated and also not very good for small devices because of all the images (34, including contributions and header image button, total 113 kb). I looked on all the components on the website "bootstrap" and do not know which would be best suited. Any advice on how go about it that will not only work for small devices, but also for more great devices would be greatly appreciated. I don't do this every day, so I'm counting on you, the people who do this day and day for your thoughts. I am including a screenshot of the original page with what looks like the stationary state. Thank you, John

  

  

  
  

  Don't know what you need help, but a mailto:link only works if the end user is an email such as Outlook client installed on their device.   A real contact form is absolutely essential today.

  To save space, you could put members of the team inside a Select (drop down list) form.

  HTML form elements

  Nancy O.

• Need advice on which PDA to buy

  I have an IMAC, OSX version.  I want to buy a Palm that has just the basics which is compatible with Mac.  I need to be able to Edit documents such as Word and Excel and download applications such as Epocrates.  I know just the basics on the PDA and I'm not an irritable person.   I need something reliable and simple to use... no need bells and whistles such as GPS, phone, songs or photos.  Any recommendations?

  Thanks for your help

  Your Advisor has been super helpful.   My dream would be to get the IPOD touch but I never thought that I had the ability to add on applications to allow me to have Word or Excel.  I will check that with Apple.  Thank you very much for all your great suggestions thoughts.

• Need advice on games that use Satellite P200-1EE

  Hello

  Bought a Toshiba P200-1EE laptop. I saw that the call of duty 4 was available in demo version seen noticed spec CPU of this laptop was not the requirement of minimum 2.4 ghz, the P200 in 1.5. I downloaded anyway and it seems to work ok.

  Is it because it's a demo version, would be the work of the full version. I'm a beginner when it comes to games, it would hurt the laptop if I continued to use it etc.

  All ideas
  Thank you
  If

  Hello

  > Is this because it's a demo version, would be the work of the full version
  Normally the game should work, but the question is; what the game performance that you expect?  :|

  I didn t play call of duty 4, but early versions and everything went well. Of course I didn t use the best graphic details, but I have good play the feeling.

  In any case, I would recommend visiting some game portals and the verification of the items on the call of duty 4. Here, you can read about the necessary material resources and that it and the experience of other players.

  Best regards

• I need advice on the most suitable package to buy

  I need advice on which is the best package to buy

  Hi Lorna,

  If you want to edit and create a PDF file you need Adobe Acrobat.

  Adobe Reader is to view the PDF files on your computer.

  Thank you

  Kapil Malik

• Icons and links do not work, they all say .encre and get an error "to open this file, windows needs to know which file was used to create".

  I uninstalled a program a few days ago and I think that it uninstalled the things I needed. All my icons tell .lnk and a message appears that says "to open this file, windows needs to know which file was used to create it.  I can't access my add or remove program file.

  I can't delete email, a lot about different programs does not work when I click on them with my mouse.  I have windows 2005.  My PC is in good condition with a lot of memory left and I have antivirus protection.  Help?

  Hello

  I suggest following the link below and follow the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-file-associationunable-to-load-eg-vlcink/d14b86ae-b02f-40fd-bf3f-5bf7922f5542

  I hope that the above information is useful!

• Need advice. Weather a small wacom tablet will be adequate for photography photoshop, or should I buy way. I want to use with the 13 "macbook pro

  Need advice. Weather a small wacom tablet will be adequate for photography using photoshop, or should I buy way. I want to use with the 13 "macbook pro

  If you carry your computer in a bag that is made for a 13 "laptop, the small tablet will fit as well. I have done this and found the small tablet to work properly. However, I found a screen 13 inches of being terribly cramped for using Photoshop.

• I've just updated firefox to the latest version. I have a network in which access us the server with remote desktop. Now, I can just open firefox on one of the remote terminals or the server. I need to be able to use firefox on all terminals.

  I get an error message indicating that an instance of mozilla firefox is already running, close it to continue.

  The question already explains the situation. I need all three terminals to use firefox at the same time.

  Not had this problem with the previous version.

  What happens if all instances use the same profile folder.
  A single instance can use a specific profile.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Need advice on this Toshiba laptop to get

  Hello

  Just joined and hope im this ad in the right place. I need advice on this Toshiba laptop to get. It will be used for photo editing. Must have a 15/16 screen. Big screen would be nice. Programs that I run are Adobe and Photoshop light room. I use a wacom tablet with 2 external hard drives. It will be used manly at home and in the studio.

  Thank you very much

  Hi Tacker

  In general I think that the best option for you is to buy notebook series Satellite A. Something like Satellite A665. It's very nice for laptop with good material and enough performance that you can use for your work.

  I prefer laptops with bigger screen so for years I use Satellite P laptops with screens of 17 or 18. Right now I use the Satellite P500. It's the big machine. For me the best Toshiba laptop, I had over the past 10 years.

  When you have a little time to visit Toshiba page for your country and check which models Satellite are available in your country. Choose the one with the better graphics chip, enough Ram and, of course the HARD drive with enough capacity.

  Please be so kind and post comments. It will be nice to read what you think of this.

• Satellite M40x-112 - need advice on upgrade HARD disk

  Hello

  I have a Satellite M40x-112, it is almost 3 years and the hard drive (TOSHIBA MK8025GAS ATA) has problems, I need to change it, but I don't know a lot of this so I ask for help and advice on which hard drive should I buy for this laptop.

  I searched and read, but I still don't understand... In my view, there are many interfaces like PATA, SATA, ATA, then I saw ATA-2, 3, 4, 5, 6, 7, 8 also Ultra-ATA/100, EIDE, IDE etc etc... so I'm really confused...

  What interface using my laptop? What interface to use the new hard disk?

  And what hard drive 2.5 "is good? You will find a large number of companies, which is the best hard drives for laptops?
  My current hard drive is fat 80 GB. I would switch to 160 or 250, this guy do you recommend?

  Thank you all very much for your help,

  I understand that very well the different titles of interface HARD drive confused most people me too in the past ;)

  Then I would try to clarify some things;
  There are two important differences between the interfaces of HDD; IDE (ATA, PATA and also known as EIDE) and SATA (SATA).

  ATA - 5, Ultra ATA/66 means Ultra DMA 3, 4 (44.4, 66.7) means UDMA/66
  ATA - 6 means that ultra ATA/100 that means UDMA 5 (100) means UDMA/100
  ATA - 7, Ultra-ATA/133 means that UDMA 6 (133) means UDMA/133

  and so now ;)

  Your laptop supports the drive HARD IDE (ATA-6) Enhanced interface and you must use the IDE HDD (NOT of SATA)

  I'm not sure on the size HARD disk max because Toshiba doesn't provide official information on the max supported drives hard but a 100 GB maybe 120 GB of HARD drive might be possible.

  Best regards

• Update video card: 630i Desktop - need advice

  I have a Dell XPS 630i Desktop 5 1/2 year, which usually is going very well, with enough power for most of the cases.  Recently implemented a 125 GB SSD as drive operating system.

  Anyway, in these last days, we got some random video artifacts appears sporadically on one or two of my two monitors Viewsonic (DVI for both of the Nvidia 9800GT 512 MB video card).  A small section of the screen will have the weird characters, sometimes a bunch of screen Flash, etc.  And a few times that there was a BSOD crash, with the video driver (nvlddmkm.sys) be responsible.

  I tell myself that there must be a bad video card or driver.  I have updated to the pilot the most recent on the Dell site (R213185, 181.30, Vista 64, A04) and well.  But I have this vague feeling that it is a hardware problem.  If it was a driver problem, why now after all these years, he suddenly would be problems, no recent changes to the system, etc..

  I used the tools of diagnosis from Dell, which has tested the performance of the video card, memory, etc, and no errors were detected, which is encouraging.

  I post here, to seek advice, in which case the video card end up being the problem and need to be replaced.

  1. If I decide to replace it, what are some good recommendations for a new map of video for this system (Core 2 Quad Q6600 2.40 GHz, 6 GB of RAM).  I don't want exaggerated and pay for potential performance of video card I would not be obtained with the old motherboard, CPU, RAM, etc.

  2. the current system is sufficient for most cases, with the main shortcoming being the slow performance when you are working on my of Canon DSLR Raw files in Adobe Camera Raw and Photoshop, watch a HD video from camcorders or other sources, etc.  In this regard, replace the video card would provide a substantial improvement in this type of performance?

  3. I'd rather than replace the entire office by something more recent?

  All thought, popular point of view.

  Don

  Video card drivers can become corrupt and simply uninstall them and their update with a new driver may solve the problem.  It is more likely a hardware problem, a driver problem, even if the 9800 GT is an old map.  If he wasn't pushed hard with the game over the years, then it can last a long time. XPS 630i is a good system and with the Q6600 it is still worthy and can perform very well.  If you were to replace the video card, I'd just get something simple like the GTX 650 HERE, which would exceed the performance of the 9800 GT and not market much.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• What is the component used to select contact in the field "to:" when create new sms on BB OS 4.6?

  Does anyone know which component is used to select contact in the field "to:" when create new sms on BB OS 4.6? What is KeywordFilterField? If yes - how to customize it to make it look like the sms app? Can you give us some examples of code? I'm new in development for BB and I need this functionality in my application.  I will be very appreciate for any help!

  You will need to implement your own field full auto in this case.