Need help about Remoteapp outside the local network (2008 R2 Std)
Hello
We have installed and configured all the 4 services (RDGM, RDLM, RDWA, RemoteApp Manager). Inside the lan, all published remote applications work correctly but
When accessing the log on credentials wan are invited on several occasions.
We use a self-signed certificate created by the remote application server. We have installed the certificate in the certification of approved root authorities store.
Question-is it possible to access remote app on the wan via this free sign certificate or we need to purchase a SSL certificate?
Thank you
Laros
Tags: Windows
Similar Questions
-
5 view customer disconnects immediately outside the local network
I work with the 60 day trial of view 5.0 5.0 w/ESXi. Everything is configured and works well inside the LAN, but we have not been able to connect outside the local network. We have a single sign-on server that is associated with a single security server. All the rules of firewall, file server and configuration procedures correspond to installation and administration guides. Try to connect via PCoIP from a variety of devices.
The client connects, check credentials, allows you to choose a desktop, opens the window of the office, but him freezes and shut up saying: 'the connection to the remote computer is complete.' This happens every time.
Anny suggestions?
Hello
First of all, are you just a black screen that stays there for about 30 seconds then it closes with error? It is usually a problem with the connection to PCOIP. Could be firewall rules blocking a port, it could be the NATs. Security servers can be hard enough for the Setup program.
First check and see if you can connect by using the view client and RDP Protocol. Also, make sure that through the firewall, the Security Server can access the VLAN Office on tcp/udp 4172. Search for NATing in the external firewall and that your security server for installation of the connection to the server has the external IP address that there are listed (not the internal IP of the server security).
If you have a team network to talk to them and see if they can track packages. Look at the logs on the server and Security Office.
You don't have to worry about this error. Security Server does not need to be on the field, in fact it should not really be on the field. It somewhat defeats the purpose of having a security server. The client has authenticated the username and the password and is spent on the desktop then ok. If the Office is unable to connect the user for a reason, then they will be left on the desktop windows request a user name and a pass.
Hope this helps
Phil
-
WRT1900AC of external storage outside the Local network
I'm trying to set up my WRT1900AC router to access a USB attached as an external storage device. I can access the drive when I'm on the LAN, but I had no success accessing outside my local network. I enabled the FTP option in the section of external storage. With the FTP option is enabled, it then points me to the IP address that my cable modem ISP attributed to the router (192.168.0.2). Obviously this won't work from the outside world because it is not the IPV6 address. I install my modem cable to the port before 21-the 192.168.0.2 address and tried to access from outside by using my address IPV6 (ftp://77.XX.XXX.XX:21) but it will not connect. I was hoping someone could point me in the right direction, as I obviously don't do something here.
Hello, Steve99888. You must configure the settings of folder first. Check out this link.
-
Cisco router access outside the local network interface
Hi all!
I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.
Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.
For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.
! PAT:
IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map
! DynNat to the internet:
IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0
! Routing policy
SDM_RMAP_1 allowed 10 route map
corresponds to the IP 101
match interface GigabitEthernet0! ACL 101 for routing policy
access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
access-list 101 permit ip 192.168.3.0 0.0.0.255 any
access-list 101 permit ip 192.168.4.0 0.0.0.255 any! ACL on the external interface:
plug-in software component gi0 extended IP access list
allow an ip
allow icmp a whole! External interface
interface GigabitEthernet0
Description $ETH - WAN$
IP 93.93.93.1 255.255.255.240
IP access-group gi0-in in
NAT outside IP
IP virtual-reassembly in
EXTENT of the Member's area network security
IP tcp adjust-mss 1452
automatic duplex
automatic speed
card crypto SDM_CMAP_2! Inside DMZ interface vlan:
interface Vlan4
IP 192.168.4.254 255.255.255.0
IP nat inside
IP virtual-reassembly in
security of the members of the DMZ
IP tcp adjust-mss 1452! Allow outbound traffic to DMZ to Internet:
Allow_All_ACL-DMZ extended IP access list
allow an esp
permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
allow icmp 192.168.4.0 0.0.0.255 any
ip licensing 192.168.4.0 0.0.0.255 any! Allow incoming traffic from the Internet to DMZ:
WAN_DMZ_ACL extended IP access list
allow tcp any a Workbench
permit tcp any any eq ftp
permit tcp any any eq 990
permit tcp everything any 51000 53000 Beach
permit tcp any any eq 995
permit tcp any any eq 465
permit tcp any any eq www
permit any any eq 443 tcp
allow icmp a whole
allow an esp
permit any any eq non500-isakmp udp
host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
IP 81.30.80.0 allow 0.0.0.255 any
IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
permit ip host 172.31.255.1 172.17.193.100
refuse an entire ip! Focus on the area of firewall:
type of class-card inspect entire game DMZ_WAN_CLASS
match the group-access name DMZ Allow_All_ACLtype of class-card inspect entire game WAN_DMZ_CLASS
match the name of group-access WAN_DMZ_ACLtype of policy-card inspect DMZ_WAN_POLICY
class type inspect DMZ_WAN_CLASS
inspect
class class by default
droptype of policy-card inspect WAN_DMZ_POLICY
class type inspect WAN_DMZ_CLASS
inspect
class class by default
dropthe DMZ security
area WAN securitySecurity WAN_DMZ of the pair area source destination WAN DMZ
type of service-strategy inspect WAN_DMZ_POLICY
destination of DMZ_WAN source DMZ area pair WAN security
type of service-strategy inspect DMZ_WAN_POLICYMaybe someone can help me to make Cisco to allow ports outside LAN using a NAT?
I did this on Mikrotik easily = |
It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.
Martin
-
I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?
Here is the link to the LAN of your system drivers:
http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe
-
I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7
Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.
Let us know how it goes.
Concerning
Stéphane
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
-
HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.
Work tried fixing it but all attempts fail.
Firewall disabled.
Printer recognizes the router's LAN.
Was also pointed out that the port does not communicate, can not remove it; Cannot add another...
Printer does not print.
How can I fix?
Hi @AnnisMonadjem,
Welcome to the Forums of HP Support!
I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
When you say 'LAN', are you referring to the network or you try to share the printer on the network?
How is the printer connected? (Ethernet/WiFi)
If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)
HP has several Officejet Pro 8600 series.
What is the name and the product number of your printer? How can I find my model number or product number?
- Update the firmware of the printer.
- Don't hide the SSID (network name).
- What type of encryption are you helping? HP recommends WPA and WPA2.
- You have a double router broadband? Make sure that the two groups were not the same network name.
If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.
To assign the static IP address, use the following steps as a guide.
- Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
- Type the IP address in the browser to bring up the SAP.
- Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
- Select Manual IP.
- Enter your IP address manual (192.168.0.232)
- Enter 255.255.255.0 for the subnet mask, except if it is different.
- Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
- Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
- Click on apply.
- Restart the router, the printer and the computer.
- Test printing and scanning.
If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2
- Try printing and scanning.
In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).
Continue on, if the problem persists.
Important! Delete the temporary files and folders by using the disk cleanup utility
- Open the disk cleanup utility:
-
I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:
Deactivation and reactivation of these two connections: FAIL.
"Diagnose and repair" on the two connections: FAIL.
Under dynamic I.P. type to static/static to the dynamic: FAIL.
Uninstalled all network via Device Manager devices, then restart: FAIL.
Manually uninstalled all the drivers and utility and installed the latest versions: FAIL
The command ipconfig/all text follows:
----------------------------------------------
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.C:\Users\Brooklyn's>ipconfig/all
Windows IP configuration
Name of the host...: Brooklyns-PC
Primary Dns suffix...:
Node... type: broadcast
Active... IP routing: No.
Active... proxy WINS: No.Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Intel (r) Wireless WiFi Link 4965AGN
Physical address.... : 00-21-5C-31-87-95
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
NetBIOS over TCP/IP...: enabledEthernet connection to the Local network card:
The connection-specific DNS suffix. :
Description...: Realtek RTL8102E Family PCI - E Fast Ethern
and NIC (NDIS 6.0)
Physical address.... : 00-1E-33-4E-2E-F7
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
NetBIOS over TCP/IP...: enabledCard tunnel Local Area Connection * 6:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
B4B}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 11:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
0FA}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 14:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: YesC:\Users\Brooklyn's >
--------------------------------------------------Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!
I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.
-
Computer disconnects from the local network after a while
Hello
the place I work has a local network with nearly 20 computers.
One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.
I have already disabled the drive for energy savings computer network mode.
What can happen and what can do?
Thanks in advance,
Felipe SousaHi Felipe,.
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that your computer disconnects from the local network.
I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.
Check out the link:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?
Hello
If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.
(a) click Start.
(b) type network and sharing Center in the start search bar and press ENTER.
(c) in the left pane, click on change adapter settings
(d) it would be to open a window with the connection to the wired LAN.
(e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).
(f) it would disconnect the computer from Windows 7 to connect to the local network.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
Easy VPN not able to access the local network
Hi guys,.
little hope can help me, I'll give you a run down on the config.
I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.
I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.
I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.
Please I need help I need to get this race to end of trading today.
I will be copying and pasting the edge router config please if someone get review and see if the config is good.
You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:
access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 allow ip 10.10.10.0 0.0.0.3 all
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy
IP access-list 120 permit 172.1X.20.0 0.0.0.255 any
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
overload of IP nat inside source list 120 interface Dialer0
no nat ip within the source of the list 1 overload interface Dialer0
clear the ip nat trans *.
Hope that helps.
-
Qosmio F60 - 11F - driver to connect to the local network
Hi everyone help pleae this.
I have a Qosmio F60 - 11F model and I have install Server 2008 Enterprise and I am facing a problem with the driver to connect to the local network.
Please help on this issue.
Hello
Go to Device Manager and identify the provider/device id:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78
Then, perform a search on the page of the driver provider.
-
I can connect to the local network, but not to the internet
Why in an internet connection, I can connect to the Local network, but not to the Internet.
I have valid IP address and configuration is good.I recommend you read some threads here in the forum about similar issues.
If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
Using the WiFi network, you must check if the common WLan parameters are favourable;
Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.Good bye
Maybe you are looking for
-
How to export the list of devices in the Profile Manager?
Hello is there a way to export the list of devices in the Profile Manager on a mini mac running OS Server 5.3? Thank you
-
Satellite A50 543: Questions of memory modules
I've got portable Satellite A50 543. I want to learn more about the properties of this product.1 - What is the speed of the ram?2 -? f I add 512 MB of memory, which adapted product is?
-
I'm trying to remove unnecessary programs from my pc. I have Windows XP and some of the most important programs are service packs. What I need to keep Microsoft. NET Framework 2.0 Service pack 2 as well as Microsoft. NET Framework 3.0 Service pack 2?
-
Error 2738 when trying to update incredimail 2
I'm trying to update my Incredimail 2, installation is interrupted around the middle with error 2738 - could not access VBScript Runtime for custom action. I tried several times now and the same message appears. Please I need help, simple answers tha
-
How to reinstall widows autocheck.exe on vista and xp
"The two PC's running XP a Vista when launchedcome upward with the message:" program not found. Skiping autochk.exe. " On two PCs, I tried to RUN autochk.exe on the BACK and the answer was: application can not run in Win32 mode