Need help: cannot compile swf

Similar Questions

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

• need help to compile multiple css files in swf

  Hello

  I have several (about 5) css files I want to compile in a single PERIOD (swf format) css.

  I thought that in two ways this can be done:

  1. do you have a summary of file css to all of the other files (something like "include") and compiling just this one.

  2. using mxmlc to compile all the css files in a single swf file.

  I got no indication on the web for each option.

  Does anyone know if this is possible? I can't wait to join the css files in a gigantic stylesheet...

  Thank you

  Shai

  Maybe a mxml with five blocks mx:Styles file pointing to the CSS files?

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Need help, cannot connect to http sites, https only...

  BLUF: I can connect only to HTTPS Web sites, http gives me 'unable to connect to the server' or "no route to host" errors.

  While I was out of town, the woman finished downloading something on his MBP that cause a lot of pop-up ads any time during the use of the internet.  I ran Malwarebytes Anti-Malware and it found and removed a bunch of infected files.  All this while the computer was on OS X 10.9.x. Since that time, on any browser (firefox, safari, chrome) we can only connect to the https pages.  For example, http://www.google.com = no go "impossible to connect to the server...". ", while https://www.googlec.com = good, but unfortunately most of the links is http, so it is useless.

  I spent most of the last days 2 pouring on the forums, and troubleshooting to resolve this question... what I did:

  Reset my router (without success, all the remains connected to it is good (everything else is also Android/windows))

  Reset my modem (even had my ISP reset everything they could on their end too)

  Back to zero/reinstalled all browsers,

  erased the PRAM using the option + command + p + r at startup.

  verified that no Proxy box is checked in the advanced network settings

  tried to change the DNS, manual, auto, opendns, 8.8.8.8/8.8.4.4, using my ISP DNS googles, nothing changes.

  uninstalled all that was installed last week (not a lot, but now I don't know what it was).

  disabled the browser all extensions/plug-ins.

  IPv6 disabled/re-enabled (set to auto),

  What works:

  Safe mode, internet is full to the top.

  While in safe mode, I was able to connect to the app store (could not in a regular connection or guest user) and upgrade to OS X 10.11.5, but even the installation that does not solve all missing / corrupted files, I always have the same question.

  I thought for sure the new OS would have fixed it, but now I'm really stumped.

  Is there a way to reset completely all network settings? Could get blocked port 80 (http)? How can I tell?

  Any help would be appreciated,

  v/r

  Sean

  (a husband who knows enough about computers to really break, ha)

  First, never use any type of software "anti-virus" or "anti-malware" on a Mac. That's how cause you problems, not how you solve them.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• need help: cannot find Microsoft Word installed on your system.

  I have problems trying to generate a PDF from an html robohelp project 7.  Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."

  I tried to uninstall both Office (2003) and robohelp, reinstall office first, then robohelp, but that does not help.  Anyone can shed light on this issue?

  Sean had made contact with me, but I mixed this issue with the question cannot start Word.

  I now him sent a file that should solve the problem.

  See www.grainge.org for creating tips and RoboHelp

• Newbie needing help to compile the code example

  Hello
  
  I know this is a newbie question very.
  Could someone please help me on how to compile the example code?
  
  [root@localhost getting_started] # gcc-I/usr/src/db-4.7.25.NC/build_unix gettingstarted_common.c example_database_read.c
  /tmp/ccMnYv8b.o: in function 'open_database ':
  gettingstarted_common.c: (.) Text + 0xeb): refers to 'db_create' the undefined
  gettingstarted_common.c: (.) Text + 0xFC): refers to 'db_strerror' the undefined
  /tmp/ccMnYv8b.o: in function 'databases_close ':
  gettingstarted_common.c: (.) Text + 0 x 513): refers to 'db_strerror' the undefined
  gettingstarted_common.c: (.) Text + 0 x 565): refers to 'db_strerror' the undefined
  gettingstarted_common.c: (.) Text + 0x5ba): refers to 'db_strerror' the undefined
  collect2: ld returned 1 exit status
  
  
  Thank you very much.
  JB

  Libraries are probably located in the .libs subdirectory (/ usr/src/db-4.7.25.NC/build_unix/.libs). You should probably run "make install" before attempting to use the library, it makes things a little easier.

• Need help, cannot export a pdf from indesign cs5

  Hello I used indesign several times so that exported this work in 2015, I've updated this 36 page book this year and I can't export the pdf file, I get no error, the background window does not move, I have every time to leave indesign, I can export indd. as jpg but not my indesign file in a pdf print ready, any ideas? I don't do anything different than normal (I think), thank you so much Cindy

  What happens with any document or just this one?

  Here is another approach:

  Gather all your linked files and fonts help

  file-> package.

  and save it to another drive.

  Frome, open the indd file in the folder of the package and try to export PDFs.

  Let us know if it works

• Need help: cannot remove the snapshot - score 98% full

  I have a VM ~ 25GB that runs on my first VMWare Server for about a year. It's in a 30 GB partition, but at some point, a snapshot is created. I don't remember this, but I must have. I can't merge the snapshot using VMWare infrastructure Web Access; the option is not available. I don't see the snapshots by looking at the directory via SSH consle.

  I have another partion available is the same size.

  It is a production server and it seems that I need to deal with that immediately.

  I would like to apprecte suggestions or references to helop to solve me this problem.

  -Thank you,

  John

  removal of files inside the guest is contra-productive - it will enlarge only snapshots.

  Hmm - so you say version 2.0.2 also has this bug?

  So either copy the VM is much more big disk and use the shortcut function to remove a snapshot - or copy it to USB and plug this drive into a host Workstation with installed.

  Or - this would work as well with VMserver2...

  Add a second disk of the virtual machine - nominal size just a little more grand, then one you have now - in a Knoppix live CD boot and

  If DD \u003d/dev/sda of = / dev/sdb

  When the sda is the original disc and the DSP is the new

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Need help: cannot install the Folio Builder keep getting error #3115

  I use InDesign 5.0 with Mac OS 10.7. After several attempts to install Adobe DPS, I end up with the same problem. I get an error #3115 warning in accordance with the law by opening the Panel of Folio generator. So I can't connect or do something with the Panel. Help, please!

  I tried to re-installed my Adobe's Suite. Install the first version of the Adobe DPS and then install the latest version of Folio (1.9) then Folio Panel producer tools

  Sorry, my phone had this answer...

  Here is a statement of an internal e-mail on the topic:

  -=-=-=-

  On Mac/Users/user name/Library/Preferences/StageManager. Local store .

  Please remove suite cache files/folders:

  * #SharedObjects

  * Dmp File

  -=-=-=-

  Please, followed if this fact/does not solve your problem. Thank you.

• Need help editing a .swf

  Hello

  I'm learning that I'm going to and so far I'm getting better.  Just Adobe flash cs3 and I think it's a very nice program that I hope that I can use for more things in the future.  Here's my first question.

  How to edit a header .swf?  I open it and it happens, but I don't see any options on how to change existing words in it.

  Quote: You really should learn the basics, then come here.  Otherwise, it's like walking in a rocket with a key factory and saying the engineer first you see "ok how to build a rocket to the Moon?

  This is how I've learned to almost everything I know

  Lightning: I mean, try it.  You do not break the program clicking on everything.  I say this because it was one of the first things that I had to find it too.  I assume that you have downloaded a model of somehere?  If so, look in the folder of Photos and see if the image [of the text?] you are trying to change is there.  If this is the case, it's oly a question to replace this picture with the image you want (make sure it's the same size).  Otherwise, again, open your XML file with notepad and see if the text is there.  Finally, keep clicking and clicking on and fast clicking everythiing in fla.

• need help cannot download adobe flash player 10

  cannot create the temporary file. Perhaps the hard drive is full? That's what I have whenever I try to download adobe flash player 10. What should I do?

  According to system requirements for Flash Player 10, the minimum OS is Windows 2000, so it will not install on Windows 98.

  Go to http://get.adobe.com/flashplayer/otherversions/, select Windows 98 / ME and download Flash Player 9.

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0