Need help cause BSOD

Similar Questions

• Diagnosis need help cause BSOD on Windows Server SP2 Standard

  Hello MS community.

  I'm looking for some help determine why my server is suddenly freezing and crashing with increasing frequency.  According to the recommendations on the Blue Screen of Death (BSOD) Wiki, I downloaded a zip file of the .dmp files three more recent crash and MSinfo32 output for information on devices and drivers on the server exposes the problem: http://1drv.ms/1O3KqJ5

  The server is a machine without brand, I had built several years running two processors Intel Xeon processor E5530 2.4 GHz with 20 GB of RAM (previously had 24 GB of RAM, but recently a SIM memory go bad then kidnapped the pair, including the problem without other problems so far).

  Members of the community with diagnostic skills, I would appreciate your help to determine what the cause of the problem, so I can keep from recurring.  The server is a production for my small business machine and I'm a bit over my head on this one.  Thank you!

  Kent

  Auditor will crash the machine when the GIS behave driver is loaded.  Just an info because it's a production machine

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Need help multiple BSOD

  Hey all,.

  I have several BSOD errors.  I reinstalled win 7 after having a BSOD error different loading windows.  I did the format of the hard drive, so it must be cool.

  I have updated all the drivers, including the BIOS.  Any help is appreciated because I'm banging my head on the wall here :)

  OneDrive .dmp and error logs

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, September 17, 2014 21:03:57 this computer crashed
  crash dump file: C:\Windows\Minidump\091714-35646-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 21:03:57 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 7:58:58 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091714-38984-02.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 18 (0xFFFFFA800A2BA2B0, 0 x 0, 4 x 0, 0xFFFFFFFFFFFFFFFF)
  Error: REFERENCE_BY_POINTER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the reference of an object count is illegal for the current state of the object.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:26:14 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-58141-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA8008A24BB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:20:10 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-39780-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002C5622B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:16:05 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-38984-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80081DCBB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 4:10:54 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091714-36114-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF80002D1236E, 0xFFFFF8A003BCB000, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  10:35:38 AM GMT on Wednesday, September 17, 2014 crashed your computer
  crash dump file: C:\Windows\Minidump\091714-42837-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80080FDBB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Not a problem, thanks.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Bugcheck 1E, {ffffffffc0000005, fffff80002cba22b, 0, fffa0000}

  0: kd > fffff80002cba22b ln
  (fffff800'02cba1ec)   nt! RtlImageNtHeaderEx + 0x3f |  (fffff800'02 ca 9108) nt! MiDoReplacement

  The exception is produced in nt! RtlImageNtHeaderEx + 0x3f.

  ---------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 navigate to services.msc and disable the nVidia Streaming Service card and then restart the computer.

  Kind regards

  Patrick

• Need help with BSOD! Appreciate any kind of help.

  Hello experts of Microsoft, recently my computer community knows bsod and it gets really frustrating. It all started April 26, 2014. I've been running this new computer for about 2 months and this problem came on suddenly.

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  043014-37237 - 01.dmp
  SysData. XML
  WERInternalMetadata.xml

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 19
  BCP1: 0000000000000020
  BCP2: FFFFFA80078E5C50
  BCP3: FFFFFA80078E6C00
  BCP4: 000000000CFBFFEF
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  I also downloaded the DMP files on onedrive and here is the link:
  http://1drv.Ms/1kkDTez

  Hello

  We have two audits of bug:

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {21, fffffa800c096000, 1 c 10, 24002200241 33 c}

  3: kd >! poolval fffffa800c096000
  Pool page fffffa800c096000 region is paged

  Validation of the headers of pool the pool page: fffffa800c096000

  Pool page [fffffa800c096000] is _not valid.

  Analyze the linked list...
  [fffffa800c096000]: invalid previous size [0xfb] should be [0x0]
  [fffffa800c096000--> fffffa800c0961f0 (size = 0x1f0 bytes)]: corrupt region

  3: kd > k
  Call child-SP RetAddr site
  fffff880 '0285b4f8 fffff800' 02ffa9b2 nt! KeBugCheckEx
  fffff880 '0285b 500 fffff880' 06a6031c nt! ExDeferredFreePool + 0xfaa
  fffff880'0285b5b0 00000000 ' 00000000 RTKVHD64 + 0x2331c

  RTKVHD64.sys is the driver for Realtek High definition Audio function.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  1: kd > k
  Call child-SP RetAddr site
  fffff880 '07a6e498 fffff800' 02e93169 nt! KeBugCheckEx
  fffff880 '07a6e4a0 fffff800' 02e92abc nt! KiBugCheckDispatch + 0 x 69
  fffff880 '07a6e5e0 fffff800' 02ebe75d nt! KiSystemServiceHandler + 0x7c
  fffff880 '07a6e620 fffff800' 02ebd535 nt! RtlpExecuteHandlerForException + 0xd
  fffff880 '07a6e650 fffff800' 02ece4c1 nt! RtlDispatchException + 0 x 415
  fffff880 '07a6ed30 fffff800' 02e93242 nt! KiDispatchException + 0 x 135
  fffff880 '07a6f3d0 fffff800' 02e91b4a nt! KiExceptionDispatch + 0xc2
  fffff880 '07a6f5b0 fffff880' 04a716cb nt! KiGeneralProtectionFault + 0x10a
  fffff880 '07a6f740 fffff880' of the nvlddmkm + 0x19f6cb 07a6f770
  fffff880 '07a6f748 fffff880' 04a8399c 0xfffff880'07a6f770
  fffff880 '07a6f750 fffffa80' of the nvlddmkm + 0x1b199c 066fe000
  fffff880 '07a6f758 fffffa80' 09f5a000 0xfffffa80'066fe000
  fffff880 '07a6f760 fffffa80' 09f5a000 0xfffffa80'09f5a000
  "fffff880'07a6f768 fffff880 ' 0xfffffa80 00000000 ' 09f5a000
  fffff880 '07a6f770 fffff880' 07a6f7b0 0xfffff880'00000000
  fffff880 '07a6f778 fffff880' 04a83a27 0xfffff880'07a6f7b0
  fffff880'07a6f780 fffffa80'08600000 nvlddmkm + 0x1b1a27
  fffff880'07a6f788 fffff880 '0xfffffa80 00000000' 08600000
  fffff880 '07a6f790 00000000' 0xfffff880'00000000 000000a 0
  fffff880 '07a6f798 00000000' c1d00001 0xa0
  fffff880 '07a6f7a0 fffff880' 04e05c70 0xc1d00001
  fffff880 '07a6f7a8 fffff880' of the nvlddmkm + 0x533c70 07a6fb90
  fffff880 '07a6f7b0 fffff880' 07a6f940 0xfffff880'07a6fb90
  fffff880 '07a6f7b8 fffff880' 04a9d04b 0xfffff880'07a6f940
  fffff880 '07a6f7c0 fffffa80' of the nvlddmkm + 0x1cb04b 07f7e900
  fffff880 '07a6f7c8 00000000'00000042 0xfffffa80' 07f7e900
  fffff880'07a6f7d0 fffff880'00000000 0 x 42
  "fffff880'07a6f7d8 fffff880'04 c 02552 0xfffff880 00000000"
  fffff880 '07a6f7e0 fffff880' of the nvlddmkm + 0 x 330552 07a6f810

  
  fffff880 '07a6f7e8 fffff880' 04a8b4ab 0xfffff880'07a6f810
  fffff880 '07a6f7f0 fffffa80' of the nvlddmkm + 0x1b94ab 066fe490
  fffff880 '07a6f7f8 fffffa80' 07ffc910 0xfffffa80'066fe490
  fffff880 '07a6f800 00000000'00000001 0xfffffa80' 07ffc910
  fffff880 '07a6f808 00000000' 00000140 0x1
  fffff880 '07a6f810 fffff880' 07a6f860 0 x 140
  fffff880 '07a6f818 fffff880' 04add419 0xfffff880'07a6f860
  fffff880 '07a6f820 fffff880' of the nvlddmkm + 0x20b419 07a6f9e0
  fffff880 '07a6f828 fffffa80' 066fe000 0xfffff880'07a6f9e0
  fffff880 '07a6f830 fffffa80' 066fe000 0xfffffa80'066fe000
  fffff880 '07a6f838 fffffa80' 066fe000 0xfffffa80'066fe000
  fffff880 ' 07a6f840 00000000 00000000 of ' 0xfffffa80 ' 066fe000

  nvlddmkm.sys is the video driver nVidia.

  -----------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 remove and replace AVG with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall GPU - z as soon as possible.

  4. RTCore64.sys is listed and which is RivaTuner/EVGA Precision/MSI Afterburner (called BSOD issues w/Win7). Uninstall as soon as possible.

  Kind regards

  Patrick

• Need help please Bsod in Windows 7.

  Sometimes, while I get on my computer restarts randomly. Restarting seems to usually occur when I am browsing internet on Google chrome. Authorities don't usually occur a lot, it happened maybe 4 times so far. I would like to help to solve this problem, because I'm worried about the health of my computer.

  Here's the DMP file. https://SkyDrive.live.com/redir?RESID=7B39B7B031294B93%21107
  Little help would be greatly appreciated.
  More information about the problem:

  BCCode: 124

  BCP1: 0000000000000000

  BCP2: FFFFFA8006A0A038

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Hello

  The attached file of the DMP is the error checking WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the error checking (address of the WER structure), we get the following:

  ===============================================================================
  Section 0: Generic processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8006a0a0b8
  Article @ fffffa8006a0a190
  Shift: 344
  Length: 192
  Flags: 0 x 00000001 primary
  Gravity: Fatal

  Proc. Type: x 86 / x 64
  All Instr. : x 64
  Error type: BUS error
  Operation: generic
  Flags: 0x00
  Level: 3
  CPU version: 0x0000000000100fa0
  Processor ID: 0 x 0000000000000000

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8006a0a148
  Article @ fffffa8006a0a2d0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: BUSLG_GENERIC_ERR_ * _TIMEOUT_ERR (Bank 0 4 Proc)
  Status: 0xfa00000000070f0f

  -BUGCHECK_STR: 0x124_AuthenticAMD

  -FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV

  -BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV

  -----------------------

  There is that for as much you can do with an error like this, checking until it boils down to a processor the motherboard and/or faulty (and probably the first) that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 the only software conflict causing usually * 124 finding bugs is the OS to the BIOS manufacturer as Asus AI Suite utilities. If you have something like this software-wise, remove it as soon as POSSIBLE.

  5 run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  6 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• Need help with BSOD PAGE_FAULT_IN_NONPAGED_AREA win32k.sys

  Hello

  How it started:

  I turned on my com and the screen was obscured for a few minutes, I force shut it down by pressing the start on my laptop and tried to back button - turn on the laptop, and it came on the screen

  Which was posted on the bsod:

  Win32k.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF901C06729B4, 0 X 0000000000000000, 0XFFFF9600006CCA3, 0 X 0000000000000005)

  win32K.sys - address FFFFF9600006CCA3 base at FFFFF96000000000, Datestamp 53c5df64

  It's probably something that I installed, however I have not installed any new devices to my com, what I did was clean by removing unwanted programs (Non-windows) and clean my com through defragmentation and free disk space.

  I can't seem to find a solution on the forum who can solve my problem, I restarted my com and tried to start in safe mode, safe mode with network, safe mode with command prompt all brings back me to the BSOD. Most assistance in the forum would require me to start working on Windows, but I'm unable to access the windows because regardless of the command I run the com will return to the BSOD. Then I tried pressing F8 startup and select "System, restoration" and by running the backup, the computor invites you to me, ' the selected backup could not be found. System Restore is looking for a restore point that is located on your backup. Choose a different restore point. "I tried to run the backup of all and the same mistake has been invited.

  Finally, I did a system recovery Image so I can't use any device to restore the computor to previous state, while it was working fine.

  Any help is appreciated, thanks for reading.

  Hello

  Thanks for the reply.

  For you to get the dump files the computer should start first and then only you can provide us with the dump files.

  I suggest you follow the steps in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7#section_2

  Note: Please ignore the steps under System Restore and reinstall Windows 7.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help to determine what caused several outbound connections domain workstation

  Need help to determine why my workstation area all of a sudden (in the last 4 days) seems to be launching many connections coming out of remote addresses of dllhost.exe.

  So far, I scanned the machine in safe mode with Malwarebytes, Malwarebytes Antirootkit, Superantispyware, Rootkit Remover (McAfee) and various other applications of identification or remove malware without success. The machine seems to be clean of malware.

  I use Sysinternals Process Explorer to view the file in question, but I can't determine how it is running. The file at the bottom of the screenshot below is the file in question. I've suspended in this shot, or there could be dozens of dllhost.exe initialized below the first.

  Using tcpview from Sysinternals shows that the process to connect to several remote IP addresses which, in many cases, are not identifiable via whois (or I do something wrong, which is quite possible).

  Is it possible to determine what triggers the executable which, in turn, seems to be calling outbound connections?

  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Need help reading Windows 7 mini dump.

  Hi all

  Can I ask you brainiacs to help determine what caused BSOD on my laptop (64 bit) to Windows 7. I have download the mini dumps of the past year. Please help, or offer solutions. I really appreciate it!

  8/4 https://1drv.ms/f/s! Aq26U4xCWn8Iaq_jXj68S5e_3TY

  5/27 https://1drv.ms/u/s! Aq26U4xCWn8IbQnFmwRCXqeRAwE

  5/12 https://1drv.ms/u/s! Aq26U4xCWn8IbB9Z_OeFYQGoSlg

  4/21 https://1drv.ms/u/s! Aq26U4xCWn8Iaz9OOri5-sTuPjo

  -Tony

  Hi Anthony,.

  There are a few reasons of BSOD, it can result from hardware and software problems. You can do to solve the problems with BSOD troubleshooting provided by this link: https://support.microsoft.com/en-us/help/17074/windows-7-resolving-stop-blue-screen-errors.

  Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.

  Kind regards

  Gilles Ova

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.