Need help choosing system with PP CS4

Similar Questions

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Need help choosing a new computer to run After Effects

  Hi all

  I waited to buy a desktop computer until I could set up something really good, but running After Effects on my laptop is not just cut it.  It slows down everything and when you try to use the feature plays only 6 frames per second. That being said, I need something that will give me better performance than my laptop but don't break the Bank.  (That way I can still move to a more desirable machine.)  I'm a noob when it comes to shopping for computers that go beyond the disk space and wifi, so I asked around, but honestly I'm more often conflicting opinions . I said the most important GPU, I said GPU is not serious at all.  It goes the same for the CPU.  I was also told that it's okay if I get something with integrated graphics on dedicated, etc.. This is where I hope you guys can help, since you actually understand the program I run.

  I would buy something already built, so I don't have to worry about what anyone screwing.  I've been thinking to get a desktop computer cheap off of ebay (as long as it will work better than my laptop) and then adding on it, but I don't know if it's the wiser decision.  All desktop computers can still be improved or they hit a point where they are worthless?

  Here are the specifications of my laptop:

  Windows 10 home

  Intel core i3 cpu M380 @ 2.53 GHZ

  4 GB of ram (3.80 GB usable)

  64 bit

  1 TB HARD disk drive

  Intel HD (internal) graphics with a total of 1696 MB graphic memory and 64 MB dedicated video memory

  
  

  Is there something out there that would be more fluid than my laptop, but for cheap AE?  Here are a few I've been Watch: Dell Optiplex 960 (3 GHz Quad Core Q9650 / 4 GB RAM / 160GB HDD)

  IBM Thinkcentre M58 PC Windows 7 Pro Desktop Core 2 Duo 3.0 GHz/8 GB / 250 GB HD with intergrated graphics

  A generation custom (with integrated graphics), including: Card mother Z87 - G41 / 8 GB RAM FURY HYPER / Gear solid 400w PSU / LG DVD PLAYER / INTEL PROCESSOR (3.2GHZ) G3258 / 240GB Sandisk Ultra II SSD / MSI cases

  
  

  And this one: AMD 4.2 Ghz Quad Core 8 GB RAM 1 TB Hdd/integre graphic.

  Thank you in advance for your help!

  
  

  
  

  
  

  For AE the only things that really affect performance are the cores, clock speed and memory.

  We must look at least an i7 quad core systems with hyper threading (6 or 8 core is much better, but more expensive) and at least 32 GB of memory. You must also at least two SSD, one for the OS, one media and projects. The video card is completely irrelevant for AE, any card $ 30 is sufficient.

  See Page Tweakers

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• Need help on query with decimal places and trailing 0

  Community of Oracle I need help in the following situations:
  
  I received the following query:
  SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
  FROM sometable;
  
  This returns the following results:
  200
  222,5
  
  I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
  So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.
  
  Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?
  
  I hope I have made my situation and question correctly and I hope a solution.
  
  P. S.
  I need to appear like that since it is an average of the prices of the products
  
  Published by: Jnijman on July 3, 2010 13:06

  You can use CASES and INSTR:

  SQL> with t as ( -- generating sample data:
    2  select 200 col from dual union
    3  select 222.5 from dual
    4  )
    5  --
    6  -- actual query:
    7  --
    8  select col
    9  ,      case
   10           when instr(col, ',') > 0
   11           then to_char(col, '999d00')
   12           else to_char(col, '999' )
   13         end formatted_col
   14  from   t;
  
         COL FORMATT
  ---------- -------
         200  200
       222,5  222,50
  

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

  Hello world

  I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

  I did in the past without problem, but I want to assure you of a few things:

  1. This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
  2. Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
  3. One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.

  One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

  Thanks for any suggestions or comments!

  Sally D.

  Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

  I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

• Need help: invalid system disk error

  I must have left my laptop on the week last with only a small battery backup as victory, that I woke up in the morning, he had absolutely no power.  When I plugged the laptop and I tried to reboot it wasn't going to the normal microsoft vista home page.

  Instead of this turned back or the system bios and on the top of the screen, he said.  Invalid system disk error.  I pressed ESC and immediately thereafter loaded up normally.  Once on the page of windows, he showed he was about 8 windows updates.  (this every way - when I left my computer on automatic update of windows, running and starting to update my computer.  Since I only had a remaining battery minimum computer must have lost all power during the update.  Because update has not been completely loaded my computer now has a problem starting).

  Whenever I turn on computer, need me the black screen with the comment of the system disk error.  While hitting escape when this screen is easy to do and makes windows vista starts normally - I'd rather have a completely normal vista installation program.

  Help, please.

  What should I do?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help on PSP with the JDE ERP integration

  Hello

  We need to implement accounting processes with JDE using FIP Solution accelerator providers.

  It seems that Oracle does not provide this integration, please someone implemented, can provide some details will be highly appreciated.

  You can go forward with the consultation.

  But if you look at the base or FIPSA solution accelerator, these are all business processes that can be built easily internal either using BPMN or BPEL.

  I have provided details taking point of FIPSA for EBS you mentioned that oracle provide for that.

  Leave that all behind, go build your own set of BPEL/BPMN process to expedite the process of AP/expense in your organization.

  Even the adapter for JDE development is very simple as it seems.

  If you decide to go forward in the internal system I can help you in all aspects or ODC/RPO/IPM/UCM/BPMN/BPEL/JDE/EBS/TFTP.

• need help choosing a graphics card

  Hi I have a pavilion A1240N hp

  Specifications of the PC: sound Windows 8

  with a processor dual core AMD Athlon 64 X 2 4200 +, 2000 Mhz, 2 logical processors

  I have upgraded to 4 GB of ram

  motherboard model: A8M2N - LA

  and all I want now is what can I do to go faster when it comes to playing games like minecraft, modern warfare.

  help a graphics card and if so what kind my motherboard supports?

  Hello

  Yes, for the games, a video REHELV is a must. Based on the following information, you can use a PCIe Express x 16 graphic card

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00714578

  You also need a better diet for a more powerful card. The following said nothing, not even of the same characteristics:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=prodinfoCategory&cc=us&DLC=en&LC=en&product=1130587

  Kind regards.

• Need help! Working with SQL databases

  Hi all

  I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

  I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

  With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

  But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

  Here is the code that I currently work for a single selection in the drop-down list.

  

  Any help is appreciated. See you soon.

  tdog says:

  Hi all

  I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

  I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

  With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

  But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

  Here is the code that I currently work for a single selection in the drop-down list.

  Any help is appreciated. See you soon.

  Regarding the table of construction:

  I can see Hat multicolumn listbox you have multiselection enabled and is limited to one or zero element selected at a time. To allow multiselction; Done just right click your multi-column listbox and change your selection to support multiple selected items. The NewVal to the structure of the event should change to a single index number in a 1 d of the numbers indexed table. No coding required. Then just to retrieve all items (since you know the index) and create the quiry. Quiry part, I'm not really (long time no see SQL), but it looks like a loop for to create the chain should do the trick?

• I need help doing things with batch files

  This applies to All THE VERSIONS OF WINDOWS and probably relates more to MSDOS than any other.

  cmd.exe or notepad.exe and comand.com applications

  I'm doing some kind of Setup.

  I have a tool nice lottle I did that works with a batch file. and he has 3-4 text file sthat go with it. I wanted to make a batch file which would act as an installer. make the MainMenu.txt, ReadMe.txt, Credits.txt, DISCLAIMER.txt fill them with the correct values, then make the .bat file that acts as the user interface. and when this launch the batch file under its weight made it has created (and not as a child of cmd window) then delete itself so all that remained was the new files...

  I tried the command IF [NOT] EXIST filename command because it's the only IF the syntax I have any slight understanding of

  EXAMPLE OF

  mkdir EXAMPLE

  EXAMPLE of CD

  IF [NOT] EXIST MainMenu.txt GOTO CMAIN

  : CMAIN

  ECHO the text I want to be in the lead > MainMenu.txt

  pause

  EXAMPLE OF

  but when I run the command 'Betainstall.bat' file, it opens and then closes immediately. What would be nice if it was the CASE of WAT I TOLD it to. it doesent need to be opened, because it only creates a directory then makes em fills with files on and its done... but it doesent do anything. and since it closes too quickly it's a bit hard to read all the messages that appears. (im not fast enough for print scrn) and addition of the pause at the end did not a thing. and / k has ever helped me before

  so someone who knows nothing about MS-DOS or command prompt this is a great opportunity to showcase the prowess of youre

  I just need to find how to get cmd to delete the last entry of Y.

  If I could get the Y equal to NULL it should write the %M % and not okay right?

  For the first part of what I mentioned above, you can simply do:

  SET M =

  The M variable will then to null.

  However, for what is in quotes: No. get M set to null will do what you want.  Use the command I mentioned in my previous post.  Note the signs double% to get the result of %M % in the command of the user file.

  IF the echo % M %! == 1 ! Goto: whatever > USER - X 2. 0.Bat

  Then the USER - X 2. 0.Bat will contain the line:

  IF M %! == 1 ! Goto: whatever

  Now, from your original:

  SET /p M = type OK or CANCEL, and then press ENTER:
  IF %M % IS INSTALL OK GOTO
  IF %M % IS CANCEL LEAVE
  : INSTALL

  You can see that if the M variable contains not exactly the capitals OK or CANCEL capitalized (that you specified), then the second half of each IF statement will not be executed. Your sample of what is getting written to the file USER - X 2. 0.Bat, you typed tiny ok and it works again the part of the installation of your batch file because he simply fell thru to the: part of the INSTALLATION.

  What you want is a batch program that allows to anticipate all possible ways that the user could answer "correctly". When you check if the variable M is equal to OK, it checks that specifically. All other cases the letters will not be the exact match.  That's why I ran three different lines looking for okay, okay, then OK.

  The fall same thru happen here:

  SET /p M = press on, then ENTER:
  IF %M % == y GOTO RUN
  : RUN

  Because the only thing you're looking for is there it will be Goto: EXECUTION of the IF statement , if (and only if) M is exactly there, but if it is equal to anything else it will fall through to the next line which is your: block RUN. As you have, any response is typical for the "SET/p M = press on, then ENTER", it's going to fall through and get to the: RUN block. The only exception is that if the user presses the enter only key, it will then generate the error message that I mentioned and end the batch file. That's why I used the! at the end of the two %M % and on the end of what we test, such as OK! This test if the user pressed the key entry in itself without the batch file, which gives an error.

  So, instead of this:

  IF the ECHO %M % == 1 GOTO RUN > USER - X 2. 0.bat
  IF the ECHO %M % == 2 GOTO README > USER - X 2. 0.bat
  IF the ECHO %M % == 3 CREDITS GOTO > USER - X 2. 0.bat
  IF the ECHO %M % == 4 GOTO WARNING > USER - X 2. 0.bat
  IF the ECHO %M % == 5 GOTO EOF > USER - X 2. 0.bat

  Use this:

  IF THE ECHO % M %! == 1 ! GOTO RUN > USER - X 2. 0.bat
  IF THE ECHO % M %! == 2 ! GOTO README > USER - X 2. 0.bat
  IF THE ECHO % M %! == 3 ! GOTO CREDITS > USER - X 2. 0.bat
  IF THE ECHO % M %! == 4 ! Disclaimer GOTO > USER - X 2. 0.bat
  IF THE ECHO % M %! == 5 ! GOTO EOF > USER - X 2. 0.bat

  Or use which does the same thing, but look more pretty:

  IF the echo % M %! == 1 ! Goto: run > user - X 2. 0.Bat
  IF the echo % M %! == 2 ! Goto: ReadMe > user - X 2. 0.Bat
  IF the echo % M %! == 3 ! Goto: credits > user - X 2. 0.Bat
  IF the echo % M %! == 4 ! Goto: warning > user - X 2. 0.Bat
  IF the echo % M %! == 5 ! Goto: EOF > user - X 2. 0.Bat

  (Upper and lower case for the block names all answer the same, whereas they are not nit-picky as the tests within the statement itself. I put the: before the labels of block in the IF statement so I know it's a label. I left the uppercase EOF because it is an acronym for end of file. And I use IF instead of If since it's a small order and I like it to stand. This bit is just my personal preference.)

  Another thing, you can make is for your first redirection in User - X 2. 0.Bat is to use the single > crush entire previous existence of this file. Then for forwarding the following him, continue the > who is the operator 'Add file '.

  Better yet would be first to check if the file of the user - X 2. Bat is and give the user the possibility to replace, rename, or to have an abortion.

  Clear as mud now? :)

  Edit: I just looked and I see that you are already doing the single > for the first time. Pass over my hikes on this part. Laughing out loud

• New on routers... Need help pls connect with Primus d-link

  Hi all, I'm new here. I am a complete newbie to routers. I just got a Linksys WRT54GL. I managed to plug it in and it works but lost my phone service Primus IE D-link (KVD-1120).  I had going from modem to the Linksys router this router for the d-link has however led to d-link and phone does not work.

  I called Primus and after waiting on my phone cell phone $20 and 1 hour and 20 minutes later, they were no help other then to tell me that the modem must be connected directly to the D-Link and that somehow, I had to find a way to connect the Linksys router for the D-Link (only 1 WAN and 1 Ethernet port on the back (a).

  Someone along the way also told me that I had to reconfigure certain ports or open some more. I don't know how or what is the same.

  If someone is able to help, I would appreciate it so. Please guide me through it, I don't know how to find the ip address is if I need to do. (read that somewhere)

  Thanks in advance for your help and your patience

  If your Modem is already connected to the D-Link router and your phone is also connected to the D-Link router, because your D-Link router has only 1 WAN and 1 LAN Port, then you can connect the ethernet cable between the LAN Port of the D-Link router to the Internet Port on the Linksys router and configure all the settings on your Linksys router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.

  NOTE: The password must be more than 8 characters...

  Once you are done with the settings on your Linksys router, unplug the power to the router Linksys, D-Link router and your modem... Wait 30 seconds and turn on the power to the Modem first, wait until all lights are the lid, then connect the power supply to the router D-Link and after 30 sec connect the power supply to the Linksys router.

  Now, check if you are able to go online from the Linksys router.

• I need help for online with my new laptop mini

  original title: online

  I bought a laptop mini JC Penny, which is supported by micrsoft 5.0, everyone don't know how I can get online?

  Hi LEEHill H,

  What is the manufacturer, brand and full model number and of the notelbook (I want to look it up online to see if there are instructions available)?  If you do not have this information, what is the reference number of JC Penny?  It come with an ISP account or you plan to use your?  How do you intend to connect to the internet (wireless via a router, cable, wireless by satellite link,...)?  If you want to install it anywhere (which means a satellite connection), your current ISP is perhaps not able to manage and you may need a separate account for this.

  The laptop come with instructions - or links to the online instructions?

  If XP is used for network access, then the installer should be easy once we understand how your ISP account is set up and how to access the functions of network configuration (if this is not the full product, but only parts of it).  Answers to the questions above should help us determine how to proceed (I hope).

  Thanks and good luck!

• Need help to hittest with nested clip.

  I am a high school student, make a flash game for a project at school. The project is due tomorrow so I need quick help.

  I'm trying to implement a function for a placement test. I am using action script 2.0

  I am coding all in one layer not in video clips to not give me a code this format unless nececary.

  OK, here's the details.

  I have a clip with the instance name src_resolute and I have another clip that is nested within another clip named endbar.

  What I'm trying to do, it's when src_resolute strike endbar I want to make the next scene gotoandplay.

  The name of the instance of nested clips parent movie clip's background.

  If you need more information let me know, but basically what I want to do is when my character (src_resolute) main fact contact with the nested clip (a clip I've drawn inside another video clip) I want it jumps to the next scene or more precisely the scene 4.

  Thanks for any help!

  If these are instance names, use:

  {if (src_resolute. HitTest (Background.endbar))}

  No matter what

  }