Need help on PSP with the JDE ERP integration

Similar Questions

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• Need help query view with the 'Level' column name

  Hello world
  
  I use Oracle DB 10 g
  
  I have this request

  SELECT  count(per_id) 
  FROM    XXITS_EMP_MSTR_V
  WHERE   per_id = 213214 
  AND     Level='Technical Staff / Officer'

  XXITS_EMP_MSTR_V is a view created by someone else.
  
  I get the error "ORA-01788: CONNECT BY clause in this query block" for the the above statement.
  Is it possible that I can always get the result without changing the view?
  
  Any help is appreciated...
  
  Thank you
  Elmer

  Elmer says:
  Hello world

  I use Oracle DB 10 g

  I have this request

  SELECT  count(per_id)
  FROM    XXITS_EMP_MSTR_V
  WHERE   per_id = 213214
  AND     Level='Technical Staff / Officer'
  

  Place the level with quotes

  AND "Level" = 'Technical Staff / Officer'
  

  Make sure that the case is used correctly when using double quotes.

• Need help: error communicating with the server on boot up

  Anyone an idea what server it could be? I received this alert after starting my Mac Pro (OSX 10.7.5):

  He didn't identify which server, what app or anything like that. I wonder if I should do a virus check. If someone things

  can a good idea, it's been so long I've owned a virus app, anyone recommend some?

  Thank you

  Steven

  

  I don't know a good way to identify which application raised the dialog box, except via the menu bar.   If you have selected the dialog box, see if the name of the associated application is upwards in the menu bar.

  Otherwise...   What elements of openness are present?   System Preferences > users and groups > login items.    Except maybe iTunesHelper, hover over the name of the application to get the path to the application, and then delete the entries you do not use or don't recognize, please disconnect and reconnect and see if the prompt disappears.

  Otherwise, open Console.app from Applications > utilities and see if you can find a server connection error connected there.   There will be a lot of messages he and some will be pretty obscure or maybe even bad omen, and the deluge of text can be quite normal.   You are specifically looking for an error in Server connection with a timestamp at the time dialog box appears.

  If you can not solve this problem from the steps above, then download and run Etrecheckand post the diagnosis report here and maybe someone can spot a package that raises this dialog box.

  OS X 10.7.5 is quite far back that there may be problems to establish a secure connection, but it's a full proposal.  If your Mac allows, consider an upgrade to a newer version of Mac OS X.

  Antivirus and Anti-malware packages have a long and sordid and increasingly questionable history and its effectiveness lately - by the industry itself - was rather less than 50% (and I suppose, fall), and the software has caused more than a few problems with stability and reliability.   Most people with OS X get put into bags by installing malicious software themselves, or through the so-called phishing; try to get the user to install the malware, or open access to the system to allow the attacker to connect and install malicious software.

  Keep all Gatekeeper to allow only to App Store and identified the developers (System Preferences > Security and confidentiality), configure, and maintain Time Machine or another backup running tool and do not install anything you didn't pick.   I would probably also either disable or remove Microsoft Silverlight, Adobe Flash and Java from Oracle, or at least keep them current and get a blocker plugin, because these are some of the most common paths to the Junk onto a system, if it is not directly installed by the user.

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help for problems with the functionality of Capture from Adobe

  Hello

  I recently installed Adobe Capture on my Smartphone (Android device) and the app is very cool.  However, after a few weeks of use, the software stops working.  I uninstalled the software and reinstalled to see if that would help solve the problem.  Unfortunately, it has not solved the problem.  Adobe does not provide an over-the-phone technical support for this product, so I hope someone here can help.

  Recreation of question:

  When you start the application, there are four 4 functions:

  1. Colors
  2. Forms
  3. Brushes
  4. Looks like

  In the lower right corner of the screen, we see a sign '+', which, depending on which function you select, invite the user to 1) select from the cloud or 3) take a new photo 2) select a picture in the camera.  When you select an option, Adobe Capture executes the designated function and the State final changes / outputs on the picture are visible.

  However, when you try to accept or to save changes / outputs, the screen seems to hang up and return to the initial splash screen.

  Can provide you any assistance?

  Thank you!

  Jerry

  Hi Jerry,

  I'm really sorry that capture does not work as it should. This is a known issue in the app and the team is working on a beta version with a fix. I hope that it will be available before the end of the week, but I'm not totally sure of the timeline.

  I know we'll get it on Adobe Android Apps - community - Google +, then join this page and you will be informed as soon as it is available.

  A couple of other things:

  It's an incredible description of the problem you are experiencing. Thank you very much for going into details so. It makes a huge difference when engineers are trying to understand what is happening.

  If please post here or contact us through the app (tap on the draw icon, then give us Feedback) whenever you need help. Sometimes on the weekends, I'm a little slow, but during the week, I'm trying to reach people as quickly as possible.

  I hope this helps.

  Sue.

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Need Windows XP Prof. with the German language

  Dear friends,.
  I have my laptop in Holland bought.
  My Labtop Windows language is English, but I need Windows XP Prof. with the German language.
  How can I install the new Version of Windows in my Labtop?
  Do I have to buy a German version of Win XP Prof?

  Hello

  I suppose that you bought your laptop in the Netherlands.
  Unfortunately, you need a German original version of Win XP.
  After new Win XP installation, you can download ad install all necessary Toshiba drivers from the Toshiba download or the tools & utility cd page.

  Good bye

• Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

  I can't find a certain number of support the customer to solve this problem.

  You can contact the Support from Adobe using link below:

  Contact the customer service

  [Click on always need help button and select the Chat option]

• Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  You can try to download instead of using the drive...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Need to null values with the values of filling the date before weekend/holidays

  I have a table with a Date column, column Type and rate column.
  
  The problem is when the weekends and holidays, column Type and rate column are null.
  
  I need all null values with the values of Type and fill rate before that date is the weekend and public holidays.
  
  Example:
  
  I have:
  
  RATE OF TYPE DATE
  07/01/2010 4510 PM 3.71
  07/01/2010 CETE28 4.59
  07/01/2010 TIIE28 4.95
  07/02/2010 4510 PM 3.82
  07/02/2010 CETE28 4.63
  07/02/2010 TIIE28 5.11
  * NULL NULL 07/03/2010 *.
  * NULL NULL 07/04/2010 *.
  07/05/2010 4510 PM 3.91
  07/05/2010 CETE28 4.74
  07/05/2010 TIIE28 5.25
  
  Will be:
  
  RATE OF TYPE DATE
  07/01/2010 4510 PM 3.71
  07/01/2010 CETE28 4.59
  07/01/2010 TIIE28 4.95
  07/02/2010 4510 PM 3.82
  07/02/2010 CETE28 4.63
  07/02/2010 TIIE28 5.11
  * 07/03/2010 4510 PM 3.82*
  * 07/03/2010 CETE28 4.63*
  * 07/03/2010 TIIE28 5.11*
  * 07/04/2010 4510 PM 3.82*
  * 07/04/2010 CETE28 4.63*
  * 07/04/2010 TIIE28 5.11*
  07/05/2010 4510 PM 3.91
  07/05/2010 CETE28 4.74
  07/05/2010 TIIE28 5.25
  
  What could I do?

  Hello

  You can use the analytic LAST_VALUE function to get the last day of work before each date into your table. It will be the same as the current day for every day of work.
  Do it a self-join to combine each current line (c) with the last day of work (l):

  WITH     got_last_work_day     AS
  (
       SELECT     dt, type, rate
       ,     LAST_VALUE ( CASE
                      WHEN  type  IS NOT NULL
                      THEN  dt
                     END
                     IGNORE NULLS
                    ) OVER (ORDER BY dt)     AS last_work_day
       FROM     table_x
  )
  SELECT       c.dt, l.type, l.rate
  FROM       got_last_work_day     c
  JOIN       got_last_work_day     l  ON       (    c.dt          = l.dt
                           AND  c.type          = l.type
                           )
                         OR     (    c.last_work_day     = l.dt
                           AND  c.type          IS NULL
                           )
  ORDER BY  c.dt
  ,       l.type
  ;
  

  Among other things, I guess that the type is NULL if (and only if) the line represents a holiday or weekend, and that the combination (dt, type) is uniuqe.

• Maybe need help a guru of the BC with catalog images

  Ran into a problem that I can't solve. In a Word...

  I downloaded a series of images to a Web site for use in the form of images of catalog. I did not check to see if they have the right size (and Yes, I've learned my lesson). Realizing the error, I have the group removed the larger images of their file via FTP and replace them with smaller images with the same name.

  On the next web page, I hope you see what I see.

  http://rocorescue01.2121customcontact.com/rescue-equipment/hardware

  All the images are the same proportions and dpi (90x90px at 72 dpi). The HTML and CSS are the same, and all are reading from catalog display Module.

  Yet, some of them seem to be reading from the larger images that I already deleted. There are others who did the same yesterday, but they seem to have corrected themselves. I left my browser, emptied the cache, but no luck. I use Firefox, but Google Chrome displays the same thing.

  My only thought is that perhaps the British Colombia uses a cache image which should have been deleted somehow? This is why I plead for an employee (or guru) thoughts.

  Here's a hat from small screen to illustrate my point.

  

  -Chuck

  Thanks for the heads up Chuck.

  This could be a problem with caching on the side BC.  I activated the option to clear the cache of varnish for the site so this should hopefully solve your problem.

  I would like to know if it is still problematic.

  See you soon!

  -Sidney