Need help: invalid system disk error

Similar Questions

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Portege 660CDT "non system disk error"!

  I just bought a used 660CDT and placed a new hard drive in it. Now, I can't load an OS due to this "Invalid System Disk" error. I tried to Boot on my XP Cd, but all the same. I tried to boot from a Disk Norton and nothing more... I have no idea what is wrong...
  I made sure the Bios is set to start first with the drive and not the HARD drive.
  I would use this system someday, but right now I don't see what is happening.
  If anyone can help I would like to thank very you much.

  Thank you
  Robert
  Houston, Texas

  Hi Robert

  AFAIK This oldie can treat only 1.3 GB HARD drive. How much capacity has a new HARD drive?
  Unfortunately, it is not easy to say what is the problem, because who knows what you do exactly and what operating system you want to use. Just for info. This old Portege comes with Windows 95 and you should try to use the same operating system.

  "Invalid system disk error means that Windows Setup could not copy the system files on the hard drive.

  Also, check the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU and under archive, you will find some useful stuff for this old book.

  Good luck!

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• Get the message of invalid system disk

  When I turn on my computer I get a black screen which includes the message 'no system disk. Replace the drive. "A press any". I had this p7-1020 since August without problem. This is to say that today.

  Thanks for any help.

  Hello:

  You have a CD in your CD drive or a floppy disk in the floppy drive?

  If this is not the case, go into your BIOS by pressing F10 at HP welcome screen.  If there is a hard drive diagnostic menu, run to check your hard drive.

  Hard drive or damage failure may be a cause of this message.

  The PC is looking for a drive (or the boot device) boot from and can not find a.

  Paul

• Malicious software removal tool and system disk errors

  I ran a full Scan with the MRT tool last night and noticed that there are a bunch of disk errors in the observer of events during the same time period. Is there a reason that this may be the result of the analysis? Running the disk errors and tool MRT in Event Viewer.

  Disk errors can be supported if it is a simple configuration problem,

  But if its due to "bad sectors" on the hard drive, then the hd is a failure. Or the other

  for example, to chk on the hd & fix, go to run, type: cmd cmd, type:

  CHKDSK C: /F agree to restart, type: EXIT restart pc... The disk check

  work on restarting the pc, once he finishes, look at the data "bad sectors", if its zero, then

  you are in ok shape...

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Need help: invalid BS_jmpBoot in the boot block: 9a6c34

  Hello dear forum.

  I had Bootcamp for over a year now works completely well...

  But suddenly, it just doesn't work today gives me the invalid BS_jmpBoot error in the starting block: 9a6c34 when I tried to repair this volume.

  When I try to start on Windows, it just says not: no device bootbale - etc... Even when you press the options so that startup is happening does not appear the logo Windows press.

  I have absolutely no idea what to do now.

  I am currently running OSX 10.10.1 and 10 Windows (if it worked)

  Please help me!

  Thank you very much

  What year is your iMac? The upgrade of the El Capitan caused the problem?

• Need help with replacement disk on port 0 in Raid1 desktop machine

  I have a HPE 380 t. I have has a RAID1 (mirror) with 2-500 GB Western Digital. When I boot it says the raid has deteriorated and an error has occurred on the player connected to port 0, port 1 player shows ok. It's in the Manager of the Intel Matrix Storage Manager, (Ctrl + I on startup). The machine starts again, but I want to replace the drive on Port 0 with another disk of 500 GB.

  How can I go on that so I don't toast all data on the drive Port1?

  I searched links and other places for help on this but nothing helps! Is there a tutorial or step by step instructions somewhere that I can go?

  Thanks in advance

  Hi Mike,.

  Lucky for you that you are using non-RAID 0 and RAID 1 or your table would probably unusable.

  You can determine the status of your RAID configuration using the Intel Rapid Storage Technology (IRST) software.  If you do not have this software on your PC, then you can Download IRST from the Intel web site.  I recommend that you use the latest version available from Intel.  General information can be obtained from the TSRI User Guide.  When you launch TSRI, help topics are an excellent source of information.  You can access TSRI by going to the control panel and select Intel Rapid Storage Technology. You can also access TSRI from low location of the taskbar.  TSRI should resemble a hard disk icon and it normally has a green check mark.  By default, TSRI is defined as delayed start, so don't expect to see active immediately.

  1. Launch the IRST while under Windows
  2. Click Help
  3. Click on troubleshooting
  4. Click on gradient volumes and follow the recommendations. Scroll to RAID 1.

• I try to remove the system disk error memory dump files clean up, usually around 350 MB but not cleaning cleaning!

  How can I get rid of these files? What do I do? seems to be a waste of space if I don't empty them.

  Hi russellinspain,

  Run the disk cleanup utility should delete these files. You can remove the files if you want to save space on the hard disk.

  Try to delete the files as an administrator. To do this, try the following steps.
  a. Click Start, type disk cleanup, click with the right button on disk cleanup and click Run as administrator.
  b. place a checkmark on "System error memory dump files"
  c. click ok and check if the files are deleted successfully.

  See Delete files using disk cleanup

  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help not enough disk space

  my computer tells me I have insufficient disk space and that I need to uninstall unused programs, those who I unstall and I can that we

  I suggest that you first:

  1. clean temporary files to any Web browser that you use (IE, Chrome, etc.).
  2. run Disk Cleanup, including the removal of all the old backup to restore the system files.

• Need help choosing system with PP CS4

  I am looking to upgrade my system... and like most, I have limits on what I have available. My current system simply takes long and cannot handle HD playback. It would be great if someone could help me to choose, tell me if you work or just give up and deal with what I got up to a total redesign is possible.

  My software is PP cs4 and the projects that I will be working on will include capturing SD and HD, but mostly HD. I'll edit and export to tape SD DV and DVD a few projects will require export in HD. Why I will not go in, I'm going to need to go with a DELL system and can only scrape up to about $1,500.

  With that... So here's what I'm looking at:

  PROCESSORS

  Intel® Core™ i7 - 920 processor (8 MB L3 Cache, 2.66 GHz)

  Operating system

  Genuine Windows® 7 Home Premium, 64 bit, English

  MEMORY

  9 GB DDR3 SDRAM memory to 1 066 MHz - 6 DIMMs

  HARD DRIVE

  750 GB SATA 7200 RPM hard drive

  or opt for the 1 TB RAID 0 performance (2-500GB SATA)

  I also have a couple externa 1 GB hard drives

  VIDEO CARD

  ATI Radeon HD 5450 1 GB DDR3

  or go for ATi Radeon HD 5770 1 GB GDDR5

  or ATI Radeon HD 5870 1GB GDDR5
  or nVidia GeForce GTS 240 1024Mo

  Well that's what I look at you and it comes in the budget... it will get the job done or loss of time and $? or am I missing something?

  I appreciate any input... I can usually make things look, but have little knowledge of the gear.

  Thank you

  John

  John, you can get drives of 1 to less than $100 from Newegg. Dell robs you blind on these things. That of why I specifically mentioned Newegg or similar. It will save a lot of money to take somewhere else and install it yourself.

• I need help, how to fix error engine.exe - application

  Engine.exe - Application Error

  The exception unknown software exception (0xc0000417) occurred in
  the application at location 0x094ff9a7c.
  Click OK to terminate the program

  Hi Soeslam,

  1. what program are you trying to install?

  2. when exactly do you get this error message?

  You can choose a different location to install the program. You can install in C: drive itself rather install in C:\Program files and check if that helps.

• I need help to fix the error - 2147024891 please

  Hello

  I got the error code: 0 x 80246008 after trying to update windows, but when I tried to look online for the answer, and has started to correct the error by activating the background intelligence transfer service, I got the error code:-2147024891 and I cannot find an answer to the it, so please help me

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/811851f8-f0a5-4e04-9517-2db30b4d6f07

  A position would have sufficed, Robert. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft