Need help! fast!

Similar Questions

• NEED HELP FAST - façade freezes when I run my program. I have all the events to the interaction of the façade. I don't have a chance to launch an event that I can't even click on anything whatsoever on the front panel?

  All,

  I'm pragmatic disabling most of the façade with a particular event. This freeze happened when I launched this event and then stopped the program in the middle of the event. While the program has been frozen at all times no matter how many times I turned on my computer and turned off and restarted labview. I tried with pragmatism, allowing some of these objects on the front façade of the loop of events without result. What else could it be? When I select the program stops at the structure of the event and is waiting for him. When I have a finite number of thread for the time terminal timeout the timeout event runs and then waits for the structure of the event and I'm still not allowed to do anything.

  Aaron

  Yenkip,

  OK, the moral of the story when programmatically disabling an object to front panel make sure you have the code that allows very early in the program, changing constantly in the middle of the program changes its active status. I tried enabling some of these objects, but not all. When I tried allowing each of them, I realized that everything in the deactivation of the tab control tab control disables not only the ability to change the tab control. IT WASN'T THE STRUCTURE OF THE EVENT. The guys help OR on the phone told me that the structure of the event was obviously the question. I'm fine now.

  Thank you

  Aaron

• MAYBE I NEED HELP FAST!

  Hey guys,.

  Okay, so about 3 weeks I decided to switch to creative cloud and at the beginning it was perfect, I installed the products I needed and they ran perfectly... Until I have shut them down. Whenever I close an app and try and restart that he, A Creative cloud error message appears saying that the software may not operate due to creative cloud... corrupted files so I did a little research to find out what the problem is and if it's a popular mistake and I found that to rename the OOBE OOBE.old and reinstall creative cloud worked!

  But... it did work until I have shut down the program... and then returns the error and I have to close all adobe programs and rename the OOBE and reinstall all AGAIN, it causes a lot of problems that I use adobe programs editing of videos that go up on youtube and also I'm a graphic designer. If there is just no solution there please let me know, I have the impression that my computer will have to clean and start from scratch.

  Thank you

  Hello

  It can happen because of the issue of file/folder permission.  Please try following steps to assign permissions, and then reinstall cloud creative app.

  for MAC

  (1) close adobe every process in activity monitor (creative cloud, sync Core, CC library, services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate please open finder and click on going in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok...

  4) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (5) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 6 open application).

  (7) open utility library of the application itself and delete Adobe application manager and creative cloud

  (8) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (9) launch cc app and it should work properly

  For Windows

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

• Problems of button open a URL... Need help FAST!

  I'm in a panic and could use help immediately if possible. I think that the problem is probably a simple, but I'm pulling my hair out.  I've published my files in a directory on my hard drive, called «CO training Beta» The main homescreen (CDMTS_Welcome.htm and swf) located in the main directory. See Cape of screen attached to the directory structure.

  I have a button on the Welcome screen that is supposed to open a subfolder (Modules) that contains the main menu (Module_Menu.htm) and individual module files. This button seems to work and launch the link open specified URL when I run the course of my hard drive, but no matter when I move to a different location or a CD, the continue button will not open the url. I don't know if I have the correct relative path... could someone please help me... I have to get out of the CD to our customer today or tomorrow. Thank you!

  Kristi

  Kristi:

  Did you actually ask your viewers to change the security settings?  I'm having the same problem, and I can't believe that there is no alternative.  The last thing I want to do is to ask all users to change the security settings before you start.

  Please let me know.

  Thank you

  JO

• example of video-conferencing need help, fast!

  Hi fans of flash... .im working with the example of video-conference and it is not possible for me to get a connecten on my local server. What is the problem? the server displays an incoming connection. thx for the help!

  Hi fans of flash... .im working with the example of video-conference and it is not possible for me to get a connecten on my local server. What is the problem? the server displays an incoming connection. thx for the help!

• Need help FAST. ! Big problem with Oracle on Windows.

  I have Oracle 9.2.0.6 on Windows 2003 Enterprise Edition SP2. My oracle SID in XRTY01PD. OracleServiceXRTY01PD Startup Type is automatic.
  
  The Service starts, but the database does not open. When I go to a command prompt and you connect to SQLPlus and connect using "/ as sysdba" I am connected to an idle instance. I said at the start, and it starts up and opens smoothly. No errors in the log to alter or event viewer.
  
  I found a note: 1022458,6 dated 2007, Oracle on NT must have a 4 character SID. I can't believe it's this day and age, that I only have 4 characters in the SID? What is the case with Windows 2003? Does anyone know a work around for this?

  Hi Chris,

  Take a look at this link:

  -http://www.dba-oracle.com/oracle9iAS_tips_windows_service.htm

  See you soon,.

  Francisco Munoz Alvarez
  http://www.oraclenz.com

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• Hey, I need help☹️ my battery dies so fast and what suite 26% it's just farm off☹️

  Hey, I need help

  my battery dies so fast and when on 26% it's just... If turned off on me I need help

  Please read this article for suggestions, including turn off background App update.

  http://www.Apple.com/batteries/maximizing-performance/

  Also try to download the app battery life which is available for free on the App Store. Check the battery with it and if defective, schedule an appointment in an Apple Store for eventual replacement.

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Need help with the installation of the drivers on the Satellite A100 - 215 PSAA9E

  Hey all

  I just reinstalled XP home on the satellite A100-215 (PSAA9E-02F00VPT) and I meet some real difficulties get the LAN, VGA and wireless drivers installed.
  Everything else works, but for some reason, these drivers are not what they are supposed to and I find myself in a bit of a tile?

  Someone at - he heard of these drivers being wrong before, if yes is there a solution out there?

  Really need help now as have been on it for a good few hours now and no not get anywhere fast?

  Thanks in advance

  Matt

  Can you give an exact describtion of the problem with drivers?
  So first of all, you can try to download the drivers again from the download page of Toshiba here:

  http://EU.computers.Toshiba-Europe.com

  And make sure that all windows updates are installed. SP2 is important to be installed for some devices.

• Need help with updates!

  I will start with my features of laptops.
  
  -System-
  Manufacturer: HP
  Model: HP G62 Notebook PC
  Rating: 4.0
  Processor: AMD Athlon II P320 Dual-Core Processor 2.10 GHz
  RAM: 8.00 GB
  System type: 64-bit Operating System
  
  So the problem I have is that when I am games I am roughly pushing my computer to its limit and I want to accelerate as efficiently as possible. I recently upgraded my 4.0 GB 8.0 GB RAM, but that's all I've done so far. Keeping in mind the laptop is a bit outdated (I bought in 2010 or 2009). I don't know exactly what the best upgrades are, so why I post here for assistance. I am open to suggestions and advice help my computer!
  
  I know I should just buy a new computer, but I grew attached to it and I can't really have a desktop computer because I am a student and I need to be moving quite often.
  
  I would say that my budget is 200 to 400 $ CAD.
  
  My questions are...
  
  How can I find out what kind of processor would be best for my computer (if you know it please leave a link or something to show me what would work well)
  
  The upgrade of the motherboard would also help? (I also don't know what would be useful or compatible)
  
  TL; DR: I need help to upgrade my laptop and suggestions on what it takes to update and with what would be great!

  Unfortunately there isn't much you can do to make this portable game better. What you need is more powerful graphics and there is no way to get it. There is no better motherboard that you put in it. Ago slightly faster processors, you could install, but the cost would be very important and he would not really game better. Sell your laptop and add it to the CAD $ 400 you have budgeted for upgrades. There are some bargains out there right now on the computers of all kinds, including laptops.

  If you need any help post more come back.

• I have adware on my mac and I need help to fix it!

  I have adware on my mac and I need help to fix it!

  Try Malwarebytes for Mac:

  https://www.Malwarebytes.org/Mac-download/

  Is fast, effective and safe.

  Do not be mislead by one who can say that it is an anti-malware application.  It would be a false increased.

  Ciao.

• Need help, something took control of my system!

  Something took control of my system, what I download, it reconfigures it to his advantage, I reinstalled the operating system 3 times. I pulled a temp file "summary, it says software strategy limited, enable, concealment and attempt to activate all privelages disable them before calling VSSWMSI install on the server."  The system is also reinstall all the downloads that I downloaded every day, why? What I just deleted half of the information I have given you. So I have to retype it again. Everything I downloaded, gets reinstalled every day. I can't uninstall ASP.NET, which I never installed everything first, I can't uninstall certain updates to include SP3. Every software that I installed it, to correct the problems, his reconfigured so fast, when I run the scanners, it does not detect anything. When I read this VSSWMSI in summary, I fell its Microsoft that is the cause, if his microsoft "tell me." If it's not you, "I apologize." A person is keeping an eye on me, when I go to ebay, I make changes on ebay, one that is followed, is not my changes, until it takes a snapghot. I don't know what to do, everything I try, the system RECONFIGURE it. His rewrite of the register, its taken control of networking. I can tell you, that local systems has something to do with my problem. The last time I reinstalled the OS, it reconfigured the firewall. Need help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the scan on the computer online and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it.

  Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it. I have Mcafee and windows Defender, but the two do not detect.  It keeps poping up of fake messages and prompts you to buy some fake antispyware.

  Hello

  Windows Defender system is a fake antivirus, a scam to force you to pay for it, while it has no advantage at all.

  Remove Windows System Defender (uninstall Guide)
  http://www.bleepingcomputer.com/virus-removal/remove-Windows-system-Defender

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
  --------------------------------------------
  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Need help with upgrade of processor - HP Pavilion DV6729ca options

  Hi, I need help to find compatible processors (CPU) upgrade for my HP Pavilion DV6729ca laptop.

  I flashed the Bios Version: l58 (the latest version)

  I know that this laptop already added support for the Intel Core 2 Duo Mobile Processors T8100, T8300, T9300 and T9500 in the version of the Bios F.45.

  I would like to know if there are all the most advanced processors that are compatible as any Intel Quad Core or Intel Core Extreme processor, thank you.

  More information: Mobile Intel 965 Express Chipset Family.

  T7700 or T7800 T9500 is the best, is best bang for buck in used cpu market.

  mixture of the above with SSD (for example, V300) & second storage conducted if needed in a caddy optical bay more max ram for your OS version would create a fast machine.

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.