HP Pavilion p6510t won't start, need help!

Similar Questions

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• HP Pavilion DV9888eo won't start with My Book Mirror 2 t connected

  Same problem here: http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&thread.id=4367

  Installation program:

  HP Pavilion DV9888eo, AMD Turion TL-60 x 2, 3 GB of RAM

  Western Digital My Book Mirror 1 t connected USB 2.0

  Windows 7 Edition Home Premium 64 bit (clean install)

  Problem:

  -Won't start if the external hard drive is connected to a USB port

  -Boot freezes, the BIOS detects the drive, shows USB 2.0: WD My Book, fan gets stronger

  Tried solution:

  -Different USB ports

  -Varied, boot order first set internal hd

  -Disconnect and start continues

  -Mouse USB wireless at the same time / plug, unplug, almost worked

  Works okey if hooked up later when Windows has loaded (also works just after when it is plugged in after successful BIOS).

  The closest match: http://www.experts-exchange.com/Storage/Hard_Drives/Q_23769717.html

  Any advice how to solve?

  Message edited by lukevader on 10/11/2009 16:02
  Message edited by lukevader on 11/11/2009 01:37
  Message edited by lukevader on 11/11/2009 01:48

  My conclusion: HP BIOS/USB controller isn't working okey with WD My Book when you start the computer. If you wait about 3-4 minutes, to return to the boot. If you re-create the partition in Windows 7, you might be able to speed up the process. I have converted the MBR to GPT (Google more) and reformatted it NTFS. Reducing a starter and holds a GPT formatted, cannot be a boot disk. Now, there are about 1 min delay. If there is a switch to turn off USB Legacy support, that could help. There is not, thanks to the crappy BIOS HP. You can also seek support from Western Digital and discover interesting things.

  Then, finally, it'll pass the boot.

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• HP Pavilion windows won't start

  Hello.. my computer hp Pavilion dv5 laptop starts and immediately after he says from windows will blackscreen with white cursor and hangs. When the computer starts the screen says dhcp... and in turn the line then nofilename or badfilename and when I did the test said some wild-card I think that the hobertkey all other tests, I ran seem to spend of the sections and the system restore won't let me... someone could help me please. Thank you for allowing me to post this... Robert... ps... my laptop is a hp Pavilion entertainment pc... SD.MS/Pro.MMC.xD...and windows 7 ultimate running sound

  Thanks Patnert... I installed windows 8, so I solved the problem... but certainly will use your suggestion in the future must be... I appreciate your time and your suggestion

• Pavilion G6 WON'T START

  Can someone advise me. My HP Pavilion G6 1371 ea mobile gave me corrupt BIOS message (501) and the next reboot it froze at the close to the bottom of page for so long, I had to cut the power of it. Now ive tried to feed it upwards and I get nothing from it except a white light at the point of connection power as his charge only. I have removed the battery and connection and held down the power button / stop rhe and still get nothing. Not a fan of all start, nothing, except for the white light. I can't believe after being in this forum just how many people have encountered this same problem... seems to able to get an another im, im stuck with just this cannot so anyone please help so I can have it up and running again, please, but I have countless questions since getting this laptop...

  We wish you good luck and... Sorry I didn't be able to help.

• HP Pavilion dv2000 won't start correctly in Vista

  My laptop does not start right. All lights come on and the hard drive makes noises, but the screen is not on (not at all). Options screen, errors or recovery of any manufacturer. This happens whenever I have turn off my computer, or the battery dies. Sometimes it will start and I get chkdsk and recovery options, but it takes several tries.

  Thanks for any help you can provide.

  KappaFox

  My OS is Windows Vista Premium

  My laptop is HP Pavilion dv2000

  The PC was purchased in 2007, so it might be giving up.

  Hi Kappafox,

  As well as what Michael posted, please use the link below to the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01087277&LC=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion Elite HPE-170 t: need help with the result of a command prompt to Power Options

  I have recently upgraded to Windows 10 in Windows 7.  Like so many thousands of people, I problelms of sleep mode.  Mine will not be auto-sleep.  It has been suggested that I saw to run command prompt: powercfg-applications

  It supposedly will list the items running on your computer which can now be auto-sleep to work.  I tried several times and up to now, I get the same item displayed each time.  This is what is displayed: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) is followed by this message: a file delete operation is underway

  My first thought is that if there is an operation to remove file in progress all the time, it's maybe the reason why my computer is not auto-sleep.  If there is someone out there who can shed some light on this situation, I would appreciate the help.

  EUREKA * SOLVED
  

  I found the answer to my problem!  After using the control system: powercfg-query and get the answer: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) delete file operation is in progress

  I started looking for whatever it is associated with the answer above.  In the Manager of tasks in respect of the services, I found the name of the file hpqddsvc, with a description of HP CUE DeviceDiscovery Service was running.  When I stopped the task and re-tried in opt power standby mode, it worked correctly.  In the Configuration of the system (by typing msconfig at the run prompt) on the Services tab, I unchecked the box for HP CUE DeviceDiscovery Service and rebooted the computer.  The service is no longer running.

  I'm sure that this Service has been added to my computer when I downloaded the hp.com/support product detection tool .  The tool scans your computer to detect and identify HP products.

  This can be useful to others who have the problem of the auto-sleep I've had.

• Pavilion m7100y won't start up

  I have a m7100y to 2005, which gets power but will not start. When I opened it it was very, very dusty inside. I cleaned it thoughly and got the same result. What is the PV of light solid blue power run fans and then a constant, a beep occurs but the computer never comes to the top, nothing on the monitor. I disconnected all devices and unplugged all cards from the motherboard. same result. Any ideas?   Thank you.

  Here is a guide to help you test the power supply.  You can perform a search of video guides on making the test.  Let me know what you find.

• "Pavilion dv6000 won't start after inserting the password

  I have a dv6000 Pavilion laptop with Windows 7 Operting System.  After a few recent updates at the beginning of my use of the computer (instead of at the end of my computer use), when I turn on the laptop, it brings up my user name and a password field, which, once I insert the password, it should redirect me to the window of the Application.  But after having inserted the password, the word "Welcome" with a circle of rotation appears on the display screen. This ' circle' rotates to progress to subject one minute and then display will Dim and never produced the home screen of the Application.  I greeted the dark screen to stay on the computer for more than 5 minutes and the House request never appears.  The only way to shut down Windows is to press Ctrl-Alt-Del, which produces a window with the following options: 1) lock this computer 2). Change user 3.)  Close the session 4) Change a password 5). Start the Manager of tasks with a button CANCEL in the center of the display and of the farm to the bottom of the icon in the lower right with the following options: 1) 2 restart.) (Sleep 3). Hibernate 4). Stop.   I used the option of doen stop to turn off the laptop.  What can I do to solve my problem and use the computer that I use for?

  Hello

  You are welcome

  I suggest you download AdwCleaner this link to delete the associated files - Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  Best regards

  DP - K

• MS Update hangs whenever he starts; need help to reset/repair (XP - SP3)

  Since a hard stop MS Update due to the loss of power, it has been send me adjustments: the process crashes when starting, either manually * or automatically, and - svchost CPU use goes through the roof.  MSE is also affected, unable to update virus defs *.

  I find that what I thought was the page MS FixIt appropriate here, but the utility stops with error code 80072F8F.  Before proceeding to the long list of fixes for the manual reset option can be found on this page, I wanted to check if (1) I'm following the correct instructions so I do not worsen things, and (2) the question whether anyone knew how to get the automatic utility to function (which, to effect a fix, would be preferable to the manual procedure).

  I'll note that I tried to bugs 'simple' as [Auto Update & BITS] reset, but nothing helped.  My guess is that there is a lock file somewhere (or similar signaling technique) confuses the utility to know where in the process it is / was stopped, but I don't know enough about how it works in order to reset it.

  Thank you all.  It has been stressing out me for the last week.

  * - For manual execution, MS Update ahead never past the research stage.
  * - For manual execution of update MSE virus def, it too would be hooking up with the message 'Search'... "appears and the bar color in about a third.

  The Windows updates November 2013 included KB2888505 cumulative update for Internet Explorer.

  http://support.Microsoft.com/kb/2888505/en-GB

  There is a known issue with this update, it can cause Windows Update work 100% of the CPU, sometimes for hours before he solves the list of updates. Some suggest downloading the update and running it manually.  Personally, I left the Windows Update process and it finally ended.

  Of course, it may not match your situation.

• HP Pavilion dv6000 won't start

  My laptop does not start. just replaced the battery thinking that might be the solution but it was'nt. When I press the button come from blue light on but nothing on the screen then the laptop turns off on its own or the lights will Flash several times then turns off? I hope that someone has encountered this problem before and has some type of solution. Thanks in advance for your help.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Check with a real computer store (one that makes its own service internal and not of leeks)
  and displays a Best Buy or other stores) or system manufacturer support. Also
  Ask known problems in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion Desktop PC p7-1210 - need help a little upgrading of CPU.

  I've got office than Quad-Core 64-bit Hp Pavilion p7-1210 the cpu is not what I wanted to, but for 542 dollars, that might say something good?  Well, seeing it will be cheaper then build a pc, but OEM or regardless of the PC are really hard to find good CPU, I know that taking and all but they are all work which have the same plug that I have no idea at all.

  Well I did a little research and found this site that tells me what I "should know" the pc, and well it wasn't really all the information I wanted, that I really need to know a little more.

  Here's the site if: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...

  I found the best cpu that speaks of the motherboard support a link but...

  I really want to 3.0 GHz not 2.9 GHz... But I guess it wouldn't matter, I do not know these games mean you have 3.0 GHz...

  I found a new PSU and video card that are probably very good already installed and they work great, had touble abit because the slot is locked in BIOS, but it was very easy to activate.

  in any case, I'll show you the link that I found the CPU, I might buy if (I can not get a 3.0 GHz cpu)

  It's here: http://www.newegg.com/Product/Product.aspx?Item=N82E16819103942

  The source site, indicated above link that this processor will be supported by the motherboard in the desktop HP pavilion p7-1210 pc.

  The site gave me for the upgrades of the processor: processor upgrade information

  I doubt the processor AMD A8 - 3870 AD3870WNGXBOXCPU K work in your system. It doesn't seem to be a BIOS update which adds support for this processor. Stick with the A8-3850 and you should have no problem.

  Frank

• Pavilion dv6 won't start - black screen

  
  

  Hello

  It is always interesting to try first following a Hard Reset.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now) and see if the laptop boots.

  If the above doesn't help, can you post back with the complete model number and your notebook dv6 series Nr - see here for a guide to the location of such information.

  Kind regards

  DP - K