Need help finding project manager

Hey,.

Publishing has just completed a project and you want to send it to someone without all the excess. I understand that you go to the Project menu, and then select Project Manager. Only problem is that I do not have a menu. Help, please.

Hi Mike,.

Check the menu file. Does it work?

Thank you
Kevin

Tags: Premiere

Similar Questions

  • I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

    I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?

    Thank you

    Hello

    You are welcome

    If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

    Kind regards

    DP - K

  • Need help finding my code of the original key.  Have the update level but need the original.  Can you help me?

    Need help finding my code of the original key.  Have the update level but need the original.

    How did you come to lose?

  • need to find the Manager device in my laptop,

    I need to find a driver through the Device Manager, but dm nowhere is dor: to install a driver in my phone Android mobile phone.

    Make a right click my computer, and then click Properties.  Then click on Device Manager.

    I hope this helps.  Good luck.

  • Need help with Device Manager, etc.

    I accidentally uninstalled some components of windows while trying to get rid of the Explorer and ran into a huge problem. I got rid of the accessories and services public and now need to find a way to at least get the Device Manager, preferably without having to re - install XP. Someone at - it suggestions?

    Hi kcole1,

    How to restore Windows XP, see the following article:

    http://support.Microsoft.com/kb/306084

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Need help finding drivers for W7 for HP Pavilion a6220n

    I plan to upgrade my HP Pavilion a6220n Vista 32 bit to Windows 7 Home Premium 64 bit.

    I need help to find the drivers for W7. When I go to HP driver download page and select the OS W7 since the menu drop-down it does list all the drivers, could someone provide me a link where I can find all the drivers W7 please?

    I heard that we can use Vista to W7 drivers, is it possible?

    Any help would be greatly appreciated.

    Hello:

    Yes, you can use the drivers Vista for your PC, and it should work fine.

    After have connected you to the internet, windows update will download all drivers windows 7 that may be more current than the vista ones.

    DO NOT under any circumstances to Flash BIOS after installing Windows 7, or you may damage your PC most likely permanently (as in kill him).

    If you find that you need to update the BIOS, do so now with Vista installed.

    Paul

  • need help finding text that should be in my clip board

    I need help to find the text that should have been copied or pasted into my Clipboard

    give all the information that you did in your other thread here, which also had an answer for you

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/need-help-in-finding-text-that-was-cut-from-Word/2e0f3bd3-B572-462B-b8ea-4406c389925f

  • Need help finding parts for upgrading pc?

    Hi I want to upgrade my pc and I know this is old, but I need help to find parts I want to improve everyting.

    Here is my pc (hp media center m7260.se desktop pc units). Please I need help.

    Yes, this processor will work with the material. "But the opinion States: currently, item can be shipped only within the United States.

    Did you read the links (information and motherboard) that lasvegaswireman posted for you?

    Micro-ATX: 24.4 cm X 24.4 cm

    Buy a new motherboard will automatically end the use of the current operating system (ie the XP OS).

  • With the help of project manager

    I use Robohelp 10 on Win 7 OS

    After renaming some files and folders in the project manager, I closed RoboHelp and when I tried to open the project again, it has been altered. Received the message "Robohelp stopped working" and couldn't open the project.

    I wonder if I broke some rules for the use of project manager. Here's what I did:

    1. right click on a folder and choose 'Rename' to rename the folder. Did that for a few records.
    2. right click on a topic and choose 'properties '. The tab 'general', renamed 'title of topic' and 'file name' (thought I used the correct HR file naming conventions to do so). Been to a few topics. Also the text index and keyword.
    3. Drag and drop a few themes in different folders.
    4. Dragged a subjects from top to bottom in a folder to change the order of the list
    5. After you move everything out folder, right click on an empty folder and choose 'delete '. done this for a few records

    One of these actions breach the rules of the help of the project manager?

    It may be useful to note also that I have not yet created a table of contents for this project

    A note more: luckily I had a backup of the project. I opened the project and after that I made the following changes, the project has been altered:

    1. In the project manager, created a new folder
    2. for a topic in a different folder, right click on the heading and choose Properties. Renamed 'title of the topic '. A revised the text 'keyword '. Add an index entry.
    3. Moved the topic to the new folder
    4. Out of Robohelp

    Which option is not permitted?

    They are all allowed. If your project is always damaged, try to remove the file from .cpd and reopen the project.

  • Need help finding the number of occurrences of a model.

    Hi all

    I need help to find the number of occurrences of a model in the column of the table data.

    Consider the examples of data - column of a row in a table:

    'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C '.

    My requirement is:

    I should get the County of S that are immediately preceded by or P.

    for the above data, I should get are counted as 3 + 2 + 1 = 6 (S-S-S-A, S-S-P, S - A)

    The configuration data is stored as type VARCHAR2.

    Thanks in advance,
    Girish G

    Published by: Girish G on July 21, 2011 23:22

    I don't know that there is a better way, then this one:

    SQL> with dt as
  2  (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
  3  SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
  4                                     Regexp_count(str, '(S\-?)+(A|P)+') - (
  5                                                  LEVEL - 1 )), 'S')) len
  6  FROM   dt
  7  CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
  8  /

       LEN
----------
         6

  • I need help finding a power supply

    I need to find a power supply that is compatible with my Compaq Presario SR5816F

    It must have a minimum flow of 12v @ 18 amps and measured 350 wattts...

    Thank you.

    See my response to your thread later:

    http://h30434.www3.HP.com/T5/desktop-hardware/will-this-power-supply-work-with-my-PC/m-p/4292292#M85120

  • Need help with NetImageTracker/Manager

    Hi all

    I need help to understand how NetImageTracker works. What I want to achieve is to download the images into listview, but I'm trying to use it directly from C++. What I have right now is declaring a new ImageTracker Net and then I use the function imageSource, but for some reason I can't pass my url in there.

    So I have

    NetImageTracker* nit = new NetImageTracker();

nit->setImageSource(QUrl(feed.value("url")));

    but I don't think that the way it was suppose to work. the feed.value ("url") is a json file I upload to the web

    Thank you for the help

    You will need create a NetImageManager instance which will use all the NetImageTrackers:

    To all:

    NetImageManager * manager_;

    In the constructor:

    manager_ = new NetImageManager (this);

    When to create ImageTrackers also put their parents so they will be automatically destroyed as well as parent:

    NetImageTracker * nit = new NetImageTracker (this);
    or
    NetImageTracker * nit = new NetImageTracker (manager_); If you want to define manager_ as parent

    Configure ImageTrackers with instance of NetImageManager:

    nit-> setManager (manager_);

    Set the URL of the image to load: (use setSource, not setImageSource because it contains the result)

    nit-> setSource (QUrl (urlString));

    Connect to the imageSourceChanged signal and when it starts to get the URL of the uploaded image.

    In the signal handler:

    NetImageTracker * Tracker = (NetImageTracker *) sender();

    QString urlStr = Tracker-> getImageSource();

    QUrl url = QUrl (urlStr);

    This url can be used in ImageView

    Tracker-> deleteLater(); possibly destroy NewImageTracker because it is no longer necessary

  • Need help finding the model number

    Hello

    I have a dell monitor, but what is on the tag is:
    CN0RW1957287282M0HMS
    Rev a01
    I need help so I can get a replacement for it power button Board.

    Thank you

    CN0RW1957287282M0HMS

    Dell RW195 part number = E198WFPF

    Search spare parts on eBay or these 3rd party repair sites and see if they sell components to monitor and have the internal documents of troubleshooting:
    http://www.lcdrepair.com/

    http://www.shopjimmy.com/Dell

  • I need help my project is due Friday and im totally stuck

    I need help im stuck I get this error message.

    ArgumentError: Error #2025: the supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    to MethodInfo-(150)

    I will attach my swf and the bearings of the code and links work just roll on video clips won't go away, I would be very grateful to any idea that I might get thank you for your help.

    my code
    import caurina.transitions.Tweener;
    import flash.display.MovieClip;
    import flash.events.MouseEvent;

    var contact2:MovieClip = new con1();
    var contact2link:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");

    var demo:MovieClip = new demoreel();
    var demolink:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");

    var bio1:MovieClip = new bio();
    var bio1link:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");

    var web:MovieClip = new webdesign();
    var weblink:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");

    var logo:MovieClip = new logowork();
    var logolink:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");

    var photo:MovieClip = new stuff();
    var photolink:URLRequest = new URLRequest("http://www.diamondgorilla.com/contact.html");


    this.b1.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b1, {scaleX:1, scaleY:1, rotation:0, time:1});
        removeChild(contact2);
       });
    this.b1.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b1, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
       addChild(contact2);
       contact2.x=217.6;
       contact2.y=353.5;
       });

    this.b1.addEventListener(MouseEvent.CLICK, onClick_b1); function onClick_b1(event:MouseEvent):void {
       navigateToURL(contactlink);
       }





    this.b2.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b2, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
        removeChild(Demo);
       });

    this.b2.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b2, {scaleX:1, scaleY:1, rotation:0, time:1});
        addChild(demo);
       demo.x=279;
       demo.y=354;
       });

    this.b2.addEventListener(MouseEvent.CLICK, onClick_b2); function onClick_b2(event:MouseEvent):void {
       navigateToURL(demolink);
       }

      
      

    this.b3.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b3, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
        removeChild(bio1)
       });

    this.b3.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b3, {scaleX:1, scaleY:1, rotation:0, time:1});
        addChild(bio1);
       bio1.x=355;
       bio1.y=355;
       });

    this.b3.addEventListener(MouseEvent.CLICK, onClick_b3); function onClick_b3(event:MouseEvent):void {
       navigateToURL(bio1link);
       }

      
      
      
    this.b4.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b4, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
       removeChild(web)
       });

    this.b4.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b4, {scaleX:1, scaleY:1, rotation:0, time:1});
        addChild(web);
       web.x=445;
       web.y=352;
       });

    this.b4.addEventListener(MouseEvent.CLICK, onClick_b4); function onClick_b4(event:MouseEvent):void {
       navigateToURL(weblink);
       }

      
      
      
    this.b5.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b5, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
        removeChild(logo)
       });

    this.b5.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b5, {scaleX:1, scaleY:1, rotation:0, time:1});
         addChild(logo);
       logo.x=526;
       logo.y=352;
       });

    this.b5.addEventListener(MouseEvent.CLICK, onClick_b5); function onClick_b5(event:MouseEvent):void {
       navigateToURL(logolink);
       }
      
      
      
      

    this.b6.addEventListener ('mouseOver', function(logo_up) {
       Tweener.addTween(b6, {scaleX:1.2, scaleY:1.2, rotation:5, time:1});
        removeChild(photo)
       });

    this.b6.addEventListener ('mouseOut', function(logo_up) {
       Tweener.addTween(b6, {scaleX:1, scaleY:1, rotation:0, time:1});
         addChild(photo);
       photo.x=577;
       photo.y=351;
       });


    this.b6.addEventListener(MouseEvent.CLICK, onClick_b6); function onClick_b6(event:MouseEvent):void {
       navigateToURL(photolink);
       }

    most of your mouse passage is remove a child, and most of the corresponding mouseout/mouseouthandler() is adding a child.  and that is probably the reverse of what you want and will cause an error, even if that's what you want.

  • need help finding a fan replacemant.

    Hello

    so I recently discovered that my fan has just about broken and causing its overheating, my computer so I was wondering if someone could help me out here. looking for a spare part. Hoping to buy the share of HP, but if it cannot be avoided so well.

    Thanks in advance.

    the model is - HP ENVY dv6z-7200 CTO Notebook PC

    Thanks again!

    Here are the two possible parts:

    To be used on the computer equipped with an AMD processor and a graphics card models
    discrete memory subsystem
    682179 001
    To be used on the computer equipped with an AMD processor and a graphics card models
    UMA memory subsystem
    682178 001

    You need depends on the video system you have. The part number you gave is a generic part number aka a laptop custom order and he could have either discrete or UMA video memory. You happen to know that? Go into Device Manager and look for graphics cards and see what he says. Chances are you have the discrete and this is the part of HP for an arm and a leg:

    http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=58AE2F5F1D0C463F98F08E025819508D&SearchIn=PartNumber&SearchPN=682179-001

    If it turns out that you have the video UMA you can just put this part number in the search function of Partsurfer.

    Here is the UMA part on ebay for a much more reasonable price:

    http://www.eBay.com/ITM/HP-envy-DV6-DV6-7000-laptop-fan-plus-heatsink-682178-001-/291142839858?PT=US_CPU_Fans_Heatsinks&hash=item43c9772e32

    The discrete version, I couldn't find it on ebay, but here it's a little cheaper:

    http://www.aliexpress.com/item/682179-001-original-cooling-CPU-heatsink-with-fan-for-HP-DV6-7000-dv7-7000-AMD-CPU/1428512454.html

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Need access to a larger number

    As an avid user of Firefox, I like the ability to use Add-ons, that is until you started pushing v4 and v5 now. Most of the Add-ons that I use is NOT yet available, and it's a shame. I love the feel of v3.6.17, and less than the Add-ons that I have c

  • Since the upgrade to 4.01, bookmarks manager is missing. Anyone know what happened?

    Under 'File', I can import bookmarks, no option here for export.Under 'Bookmarks' there is no bookmark manager anywhere to be found.

  • NETGEAR CM600 speed

    What is the speed of the processor (SoC) in the Netgear CM600 Modem cable 24 x 8? I know that the Netgear CM500 16 x 4 and Arris SB6183 16 x 4 modems use Broadcom chips that have the processing power of the double thread of 600 MHz. The Arris SB6190

  • Sequence of fields to display in the order

    How can I add the "Requirements" field to display in my window in the sequence editor teststand next to each other as step Description, Action Post, Setings...?

  • HP Pavilion 15 n208-tx restarts repeatedly after updated recent windows 8

    My laptop automatically installed the recent update of windows 8 at shutdown. After that, it is not start properly. It restarts several times only. A whole summer facing the similar problem. Please suggest.