With the help of project manager

Similar Questions

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of v22.0 cannot apply update - will not even after several reboots - advice?

  bold text

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of time interleaved sampling (TIS) to get the highest sampling rate of data acquisition card

  I tried enabling to TIS using nodes of property for the appropriate channel and by disabling the TIS for strings, I don't want to use. When I do that, I get the following error:

  niScope read Cluster.vi:1internal software error has occurred in the extended software. Please contact the support of National Instruments.

  Name of the component: nihsdru
  File name: p:\Measurements\highSpeedDigitizers\hsd\driver\trunk\1.10\source\redirection\tHardware.cpp
  Line number: 1038

  State code:-223425

  Any ideas what to do?

  Thank you, but I managed to fix it with the help of a few colleagues.

• I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image.

  Original title: HELP! Problem 'open with '.

  I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?

  Hi Patti Gunderlock,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

   

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

   

  Method 2: If the method above is not enough, then you can follow the steps described in the article and check.

   

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Let us know if that helps.

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• With the help of several types of video files into one film will prevent the publication?

  I am using Movie Maker on Vista.  I have mpeg, avi and wmv files.  The Movie Maker plays very well in project mode, but will not be published.  Multiple file extensions would be the source of trouble?

  If so, is there a quick fix?

  Hi d1bon,
   
  1. what exactly happens when you try to publish a project?
  2. do you get an error message?
   
  With the help of several file extensions should not be a concern.

  Disable video filters and check the result.
  1. click on tools and then click Options.
  2. click on the Compatibility tab.
  3. to turn off a filter, clear the check box next to the name of the video filter.

  You also uninstall the Codecs and check the result: Uninstall

  Please provide us with more details on the issue, so that we can better help you.
   
  Check publish a movie in Windows Movie Maker
  Check, solving problems with publishing a movie to your computer 
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• With the help of JavaScript condition in the dynamic action of JQuery selector

  Hi guys,.

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Any advice would be appreciated.

  Chris

  Cashy wrote:

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Simple solution is to hide the region containing the element of text by default, using the style = "" view: no ' in the property of the attributes of the area in the region. " It will be always hidden when the page initially, but its visibility will be controlled by the DA subsequently.

• With the help of Acrobat with MS Access VBA

  With the help of Acrobat 9.5. I'm trying to analyze a problem, so I have this test code:

  CODE

  Void testObjects()
  Dim i As Boolean
  Dim objapp As acrobat. AcroApp
  Set objapp = New acrobat. AcroApp
  objApp. Show
  I have = objapp. CloseAllDocs
  Debug.Print I have
  I have = objapp. Output
  Debug.Print I have
  Set objapp = Nothing
  End Sub

  After Objapp.closealldocs I I = true (successful) but after I get i = objapp.exit I = false (no), and of course Acrobat is still active. How can I get Acrobat to close? It is a bit of test code. In the real application Task Manager indicates acrobat using memory more and more as the application moves through the records.

  I suspect I'm missing something obvious here, but what? My experience with Acrobat automation and access is limited, so be gentle with me!

  If this is the wrong forum, please tell me where I should go.

  I thought people might be interested to know that I found a work around for the problem of memory leak. I inserted a break every so many documents and that seems to be enough to let the Acrobat to free the memory.

  On the development of PC a break of 10 seconds every 50 records (or probably more) are sufficient enough. but I'll have to do some settings on the computer target to find the optimal number. This means that the process is extended, but it is once a year of operation, so I don't think that will be a problem. I'm estimating that the final time will be approximately 15 minutes.

  Of course, I thought of the solution until after that I had worked to generate Word documents instead, but it now means that we can offer the form in PDF or Word format.

  Thank you all for all the help and suggestions.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.

• With the help of several conditional tags with multiple outputs of WebHelp

  I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

  I added each help topic associated with the help topics that I created.

  Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

  My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

  Example: National accounts TOC

  What is generated:

  I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

  None of your screenshots came through - the icon of camera in the web interface allows you to attach images

• With the help of a correct sign in iD and password but nothing happens.

  With the help of a correct sign in iD and password but nothing happens - it just keeps watch as this is something but 'Hourglass' never really stops cycling!  Can I open a session / connection to Adobe on my iPad so I know that's all is OK but not on my MacPro!  Any ideas welcome... never had this before and I need to download my purchased upgrade Lightroom 4 as soon as possible! Thank you

  Hi, thanks for the suggestions - certainly connected to the internet!

  In the end, I went through the process of "update" in Mackeeper and even if there is nothing relevant that I could see - somehow I managed to connect!

  -It was strange that I never had errors on the sign in at all... but if I went through the process of the struggle to sign as a reminder of the password request, it looks like my email address / iD has not been recognized - weird because it has all the same info/details usedto sign in on my ipad and used to buy all my software recently and in the past!