Need help here please

OK, I have a HP Pavilion a6010n PC. Windows Vista Home Premium 32 bit. Now when I download something. I click on the .exe file and it won't let me install it. I made a new clean install of windows using the Recovery DVD Kit from HP. And sometimes I can get to install certain programs. And sometimes, he won't let me. Any ideas on how to solve this problem? I hate to have to go back because of Linux of this problem.

Hello

After the reinstallation, you did it ensure that Service Packs are installed, and Windows is up-to-date?

Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

It will also tell you which SP you have installed.

Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

http://support.Microsoft.com/kb/947366

See you soon.

Tags: Windows

Similar Questions

  • After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

    After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

    FAQ: Why am I getting yellow and red lines running through my images on pause?

    Update of El Capitan.

  • Ink cartridges stuck, need help ASAP please

    Hello I'm writint this because I need help! I get an error message my Macbook Pro on my Photsmart 6520 is blocked and it says to check if all obstructions are bloacking it. Hoever, it's like the 20th time I check inside the printer over and over again. Make sure that everything is in order, however when I turn the printer back on, he will say the same thing and I keep trying to make it work, but it won't! I just got the printer yesterday and I caanot establish it, please help it is urgent.

    In the paper here troubleshooting steps may help resolve the carriage jam message on your printer Photosmart 6520.  If the steps it do not solve the problem, I suggest you contact HP support.  If you are in the United States or Canada call 1-800-HPINVENt, also see details here.

  • BlackBerry smartphones think I've seriously damaged my BB curve9320! need help ASAP please:)

    Could you possibly help me please?

    I had a blackberry 9320

    My encryption settings and firewall settings are locked and have tried everything to unlock

    And also my application management won't let me not reset my fire wall guests Ant guard saying reset

    By default the permissions without what do? I havnt had my discs either...

    Hello and welcome to the community!

    I can't tell you how you got in this situation, but what you describe resembles a restriction of the COMPUTING policy... Please check here:

    • KB30076 How to check for an it on a BlackBerry smartphone policy

    If there is a COMPUTING strategy and you are on corporate/BES, then you have to go talk to your BES admins... they are in control.

    If you have a COMPUTER policy but are not in BES, then you will need to make fairly drastic measures to clean it... and you don't need your original discs... just a PC and access internet.

    First, download and install the PC Desktop software:

    Now, the behavior of your BB to your PC a backup:

    Now perform a ResetToFactory

    • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Now run a restore of your BB of the backup that you have brought to your PC... but don't forget and NOT do a restore roughly. Don't restore these databases you need and more precisely to avoid those that relate to the COMPUTER policy:

    • KB10339 How to use BlackBerry Desktop Software to restore data from a BlackBerry smartphone from a backup file
    • KB03974 List of database for the blackBerry smartphone

    Now you should be in control on all these parameters.

    Good luck!

  • Early flight, need help! Please, I beg you!

    I've updated my iphone 5 c for the latest softwear and now have forgotten my password. I am able to connect to my icloud to select Reset my phone but could not complete the reset bc, I can't my phone to connect to the wifi bc its coastline. I don't have a model to coonect it. Need help please, I have an early flight and need my phone to work!

    What follows has instructions for all methods: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • Canon printing service app works now printing of phone and im upset I need help people please

    Canon has me awhile back that they do not use cloudprint to download canon printing services and printed phone for quite a while... He kept adding more numbers to connect, and now on the third issue, he leaves his all blackened... canon stop messing around entourage! ... I need help from someone who is nice enough to help a belle of the South to do it please

    Hello!

    Welcome to the Canon Forums and thank you for your post!

    To have a better understanding of your problem, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using and if you are connected via USB or WI - FI. In this way, the community will be able to help you with suggestions that are appropriate for your product.

    If it is a time sensitive question, our team of technical assistance to the United States is standing, ready to help you 24/7 by Email http://bitly.com/CanonEmail or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

    Thank you!

  • Autoruns.exe serious problem, need help urgent please

    Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

    Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

  • Icon blackBerry Smartphones BBM missing after the update. need help ASAP please

    Hi I'm using a bb bold 9780 and my bbm is 5.0.1.45 and when I tried to update, it hangs whenever he finishes the installation. And when I got tired of a battery pull, my bbm icon is missing. No idea how to solve this problem? Could really use some help here cos its pretty impt. Thanks in advance

    Hi aaron1212,

    If running above doesn't solve the problem then try this link for installing BBM:http://mobileapps.blackberry.com/devicesoftware/entry.do?code=bbm6

  • Extended attributes are incompatible - need help urgent please!

    Hello Microsoft Forum,

    I want to keep this short, as I now have serious problems.
    I have Windows 8 Pro, with each update installed.
    I was looking through the net by chance, then the messaging with a friend.
    My friend has design a logo, which he sent via Skype in a .png format.
    When I double click on the logo, the problems started. Everything has become very slow.
    The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
    The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
    Image viewer of course could not open the music file.
    So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
    This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
    In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
    I'm the admin user and UAC is set to the last row (no notification).
    In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
    I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
    I have, however, never changed anything with my theme, the sound was enabled by default.
    Setting the sound theme "None" did nothing, just like the definition of the theme options.
    Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
    Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
    With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
    This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
    The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
    I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
    I wish I had of emergency aid, as this is my main work computer
    . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
    Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
    Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
    I really want to reinstall everything, I hope that a solution to this.
    Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
    Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
    Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
    Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
    Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
    I hope that my question is understandable
    . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
    Kind regards
    Richard

    Hi Richard,

    Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

    I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • I need help! Please delete my account

    I need help to cancel my account!  I've tried everything!

    Yes... like appearing on Adobe help pages... 3 second google search.

    Contact the customer service

    Neil

  • Help is wanted and needed! Here, please give a second to read what I have to say!

    Hey can someone help me! Well I bought your desktop hp in 2009 and my customer service/warranty has expired and I had a bad virus my computer cleaned witch I did the recovery on another computer discs and I get the point to install windows 7 but its saying I need the disc or this than ever other way to install it but I did not clean the virus wiped my drivers and my computer is not even detect them more if I could call HP and pay money on a disc with my serial number or what I have to pay another REAL question HP can do for me with the serial number with the disc or I do not know can they just give me the disk as a copy that works for my computer! Someone please HELP...

    Call hp and provide your serial number and they will be able to send you mail (usps) to about 15.03 + taxes, these discs have other methods of delivery available for about 6 or 12 dollars more.  These recovery disks will have everything that you need to recover your computer to factory settings, including drivers.  Make sure that when you are recovering, you have only the monitor/keyboard/mouse cord and power is connected.

  • Need help if please connect a recorder player VCR DVD Toshiba DVR620 to my Vizio TV and also have Comcast Cable

    I need some help hang my the Toshiba DVR620 DVD/VCR Recorder to my Vizio TV and we have Comcast cable

    my email address is * address email is removed from the privacy *.

    Want step by step instructions please. As I can't understand those in the manual.

    Thank you

    I need some help hang my the Toshiba DVR620 DVD/VCR Recorder to my Vizio TV and we have Comcast cable

    my email address is * address email is removed from the privacy *.

    Want step by step instructions please. As I can't understand those in the manual.

    Thank you

    ========================================
    I used to have this exact recorder and it was awesome...
    We used it to transfer all our family VHS tapes to DVD.

    Not much help... I realize, but I remember well just hung
    like a regular VCR.

    The following Toshiba Support link may be worth a visit:

    Supported DVD recorders DVR620
    http://support.Toshiba.com/support/modelHome?FREETEXT=2805106
    (see the knowledge base article: "connection and configuration)
    (' upward your DVR / DVD Recorder ")

    And... the following video tutorial may be worth a visit:

    Connect your DVD/VCR player Combo
    http://www.YouTube.com/watch?v=jqxHZilQneI

  • Vista Start everywhere and I have no disks = what to do now? a NON-techie person needs help here

    Vista won't start mode without failure or Normal startup - going "bars" on the screen process and hangs there.  Safe mode, hangs at crcdisk.sys when loading the drivers.  We are talking to remove and rename FILES; WHAT are the files?  Also, I have NO disks that Vista has been loaded on PC.  No solution but the new computer, or? and this USV for device SATA - what do I do?  Create a network with another PC, so you can 'see' your a w / problem.  For a person no - IT, it's all VERY, VERY hard and very disturbing to try to correct.  As the mechanics of the car if you do not drive yet.  Help!

    Bonnie, you are on an online forum, this isn't a team of engineers from Microsoft technical support! It is a voluntary group of people who help others. You only posted your question a few hours ago, you need to chill out and wait for someone to notice your message on the thousand questions here.
    Now, if you want the answer to your question, you will need to provide more information, tell everyone about your pc.

    Who is the manufacturer of your computer? and what version of Vista are you using?

    Your computer may have a recovery partition that can be used to restore your computer to its factory settings. Find out how to get here: http://www.computerhope.com/jargon/h/hiddpart.htm
    If your computer does not have a recovery partition, you WILL need a Windows Vista disk you need to somehow download online or get a disk from someone else. Sometimes, you can reorder a replacement from the manufacturer's recovery disc. You will need to check with them.
    If successful to download an ISO of Vista, see: How to create a disk for Vista startup repair
    Once you have the disk, you can perform the repair
    P.S. Your problem is a common one, there are thousands of guides out there that show exactly how do. Just Google it or go to YouTube.
    If you are unable to do, bring it to a repair shop, they will have to the disks and can do it in a few hours or less.
  • HP probook 4545 s: I need help now please help me!

    OK so I have just updated to windows 7 Ultimate edition 32 bit and for some reason that I have no ethernet drivers or drivers wifi so I can't connect to internet on my pc somehow! Help me!

    You are the very welcome.

    Here is the driver for the wireless card you need...

    FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59828.exe

  • Not able to manage the value 'Table Type' in my procedure, humble need help here

    Hi all

    I am facing a problem with below pl/sql block. The time I run it it works fine, but when I run the procedure only from the exact values (hardcoded), it throws error as below.

    [Error] Execution (38: 1): ORA-06550: line 2, column 1:

    PLS-00306: wrong number or types of arguments in the call to 'CREATE_ABNORMAL_BY_TRADER '.

    ORA-06550: line 2, column 1:

    PL/SQL: Statement ignored

    What I understand problem is, I use a Type of table herewhich works very well with my Pl/Sql block, but do not work when I run the same procedure of the value hard-coded.

    Please guide me how to handle this situation.

    Pl/Sql block [works absolutely well]:

    Declare

    lv_eff_from_dt DATE;
    lv_eff_to_date DATE;
    v_severity_codes_wl param_tbl: = param_tbl();
    lv_algo_id_wl sagedbo.alerts.algo_id%TYPE;

    Begin

    lv_eff_from_dt: = sage_utility.get_transaction_date('EFF_FROM_DATE');  -' 05-Aug-2013. '
    lv_eff_to_date: = sage_utility.get_transaction_date('EFF_TO_DATE');       -' 04-sep-2013. '

    lv_algo_id_wl: = sage_utility.get_code_values('ALERT_MODELS','GRAY_LIST');  -GLABNORMAL

    v_severity_codes_wl: = sage_utility.get_multi_parameter_value(1,'SEVERITY_CODE_WL'); -4.5

    SONARDBO.sage_generate_alert.create_abnormal_by_trader (lv_algo_id_wl, v_severity_codes_wl, lv_eff_from_dt, lv_eff_to_date, 'US');

    End;

    Pl/Sql block [does not] (by the way the same values but hard)

    Begin

    SONARDBO.sage_generate_alert.create_abnormal_by_trader ('GLABNORMAL', '4', 5, 5 August 2013 ', ' 04-Sep-2013', 'US');

    End;

    Error PLS-00306: wrong number or types of arguments in the call to 'CREATE_ABNORMAL_BY_TRADER '.

    I'm sorry that my question is not so generic, you cannot run on your computer. How should just guide me with the concept, I treat the values in table hardcodedly? (For testing of use)

    Thank you very much

    If your passage of type table, then you will need to run as below

    Begin

    SONARDBO.sage_generate_alert.create_abnormal_by_trader ("GLABNORMAL", param_tbl (' 4 ', ' 5'), August 5, 2013 ', ' 04-Sep-2013', 'US');

    End

    Means that you must call with the table type ("' hard coded values"). Here is the simple test. Take a look at this

    SQL > CREATE or REPLACE the TYPE nt_tab IS TABLE OF VARCHAR2 (50);

    2.

    Type of creation.

    SQL > CREATE OR REPLACE PROCEDURE test_proc (p_nttab nt_tab)

    2 AS

    3 v_nttab nt_tab: = p_nttab;

    4 BEGIN

    5 FOR me in 1.v_nttab. COUNTY

    6 LOOP

    7 DBMS_OUTPUT. Put_line (v_nttab (i));

    8 END OF LOOP;

    9 END;

    10.

    Created procedure.

    -Perform the procedure with only one value of type table

    SQL > EXEC test_proc (nt_tab ('KING'));

    KING

    PL/SQL procedure successfully completed.

    -Run procedure with the multi-value table type

    SQL > EXEC test_proc (nt_tab ('KING', 'AAAA', 'BBBB'));

    KING

    ABDELKADER

    BENAMER

    PL/SQL procedure successfully completed.

    Post edited by: 000000

    Post edited by: 000000

Maybe you are looking for