Need help how to make "Foglight and Performance analysis CLI - Windows Installation of" because my FMS_HOME is in Oracle. Please notify.

Similar Questions

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• Need help: how to remove a partial black framing of end of video? 1/8 end frame is black

  Need help: how to remove a partial black framing of end of video? 1/8 end frame is black. I inserted the last clip on the timeline and it ends with this last scene with vertical black bar of 1/8th. I just need to know how extend this image to get rid of black then the image is there without messing up the audio file. I'm still learning, so please have mercy. I looked for answers online and friends, but have not yet been answered. I'm almost ready to download so hopefully get response as soon as possible. Thank you. JR

  What is the problem you are having?

  http://forums.Adobe.com/message/5814212#5814212

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• How to make a dvd of clips using windows dvd creation

  How to make a dvd of clips using windows dvd create?

  Depends on what format they're in. If theyre not in a creation of dvd format can load, you will first need to convert them with something

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• need help on history, recycle bin and cookies: how will I know what someone has done on my laptop?

  I would like to learn more about history on my computer vista laptop microsoft and more on maybe the trash and or cookies. For example, someone else used my laptop last night and delete everything that he was looking at or for then how can I know what it was?

  Assuming that it has not been removed, you can view the history of visited web sites by clicking on the Favorites button, click the history tab.

  The only things in the trash are files or folders that have been removed from the system (no evidence they have been read or something like that).

  Cookies will not tell you anything either because they are terms in the code and you can not tell what web site they belong - no good for tracking not web history (and they apply only to the history of the web).

  You can view the Start / recent items to display some of the files which were recently seen (assuming that the list has not been removed).  That may help some.  You can also go to C:\Users\\Recent for a longer list of recently accessed files (as long as you know the user name).

  There is actually very little that you can do with hindsight to see what anyone seen or done on your computer.

  If you want to implement such a procedure, use the Parental http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls control and activity reports control Parentalhttp://windows.microsoft.com/en-us/windows-vista/Set-up-Parental-Controls-activity-reports.  Do this for each account you want to track.  Then you can check what you wish now that you could check.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't read my product key on the back of my laptop and I lost my drive there. My computer also, told me I need to validate to make sure it's a genuine Windows.

  which should I do when I can't read the tag product key on the back of the laptop?

  I can't read my tag of product key on the back of the laptop and I lost my drive there, and my computer tells me I need to validate to make sure that it's a genuine windows and I know that it is. Whenever I have validate, it stays on the screen never validation and doesn't change at all, even for half an hour or an hour, that it remains the same. someone will please understand this and help me...

  Hello

  As you have lost the product key of the Tower, you will need to contact the manufacturer of your computer.

  Ask them to send you a set of recovery disc for your model computer reinstall the operating system to how it was when new.

  The relocation method preceding normally does not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• Need help to reallocate the space and get rid of the double partitions?

  Can someone help me to reassign my data partition? I was trying to dual boot my computer with windows 8 and linux, but I failed miserably a year ago. After a month of research, I managed to get into my windows installation; However, all the data is irrelevant. I'm pretty sure that I moved my EFI boot files... something like that is called... I moved it in this space of 22 GB which is WAYYYYYYYYYY to much space for these files, which require that... ? 1000 mb or more? Anyway. I need help this hot mess of fixing. Thanks for any help. I really appreciate it. I know virtually nothing about it. Perhaps someone can guide me on how to fix everything by using linux? If there is there any program that can solve this too, that would be great. A free solution would be appreciated. Thank you all.

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you want to delete the partitions created on your PC under Windows 8 double. I will certainly help you to question.

  I suggest you refer to the suggestion made by Yann replied on 9 April 2015 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/how-do-i-rectify-this-confusion-in-disk-management/afc2a41e-ef1c-4880-b4eb-05b960a6d8c3

  Hope this information helps

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Need help how to do a job of puzzle game

  Hey guys,.

  In case anyone is interested... I need help to get the last elements of my memory game of brainstorming on (flip two cards to see if they match) to work properly. I have it all set up so that when the two cards are turned over, it can be checked for accuracy and user can continue on with the game. I'm working on two other things that I don't know how I could do.

  (A) I need to make sure only two cards can be returned at the same time. At first I tried to do this by assigning a value to the expression (say 1, for each round) and whenever you click on a map, it checks for what the current value is. If the value was two, showing two cards had already been selected, all cards would be disabled. This eventually led to either never be able to re - activate, or only the first game and then not work again. Any ideas on how to prevent a user from flipping over 2 cards at the same time, then after checking the accuracy once again flipping of cards with a limit of two-card again?

  (B) related to the last question is the need to be able to have a card back (let me clarify by back flip, I hear a "card cover" or button essentially custom, I made that looks like a playing card.. ish would be re-shown having been hidden when selected), if after checking for a match, it is not really a game , or others if it is a mistake. Any ideas on how to do this?  Thank you very much in advance.

  I'll be sure to the credit of those in the project for your help.

  -Evan

  Did you look at the games that I have on my blog?

  http://lilybiri.posterous.com/concentration-game-created-exclusively-with-c

  http://lilybiri.posterous.com/gaming-in-Las-Vegas-DevLearn-2011

  Having a version for COP6 as well, unpublished, but talk about the changes in this film:

  http://www.YouTube.com/watch?v=Sy09xPoP69A

  The deactivation is possible as well...

  Lilybiri

• Quick help: how to make grey, white, gray lines in listbox?

  Hello

  As in the subject. How to make gray, white, gray lines in listbox?

  See you soon

  

  Apparently, Jim and I feel the same (and I need a new CTC for 2013)

  Best

  

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Adobe error 1635 installs on vista laptop I tried Defender pro 15 need help im not that computer and adobe installs always ewrror 1635 need help

  any solution easy errror 1635 vista will not download adobe

  Hello
  
  I found this error on the adobe Web site, so I suggest to try the steps in the link below and check if it helps.
  
  http://kb2.Adobe.com/CPS/400/kb400924.html
  
  I also see that there are some registry settings, you must run on the computer.
  
  Registry warning:
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  How to back up and restore the registry in Windows:
  
  http://support.Microsoft.com/kb/322756