Need help in recovery mode.

Similar Questions

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• Satellite C660D - 18 c - need help with recovery

  Hello

  I need help for my computer. My calculation is not started and shows "bootmrg is missing. I'm putting in recovery CD (i downloaded from Internet) when the CD starts, I get choose it to select the operating system, but it isn't here, what should I do?

  You can't expect that we comment on a few non-originales recovery image download from the internet.

  Recovery image is on a language only if you can't choose another language. Recovery images vary between countries, so if you have a recovery for UK image you must install the default language (English).

  What language is this recovery image?

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Windows XP-need help Urgent recovery

  I'm new to Toshiba. I HAV a hard drive 60 GB partition and windows XP home installed. I want to partition the hard drive now. Now after formatting the hard drive that I lose Windows XP it completely or there at - it of the chance to recover and reinstall it. Need urgent help.

  Hello

  You can reinstall your laptop using the recovery CD. It is easier and more rapid way to reinstall the operating system, all drivers and tools. Put the recovery in DVD-ROM CD, start the laptop and press the C button. At first, there is the choice between two types of installation (Standard mode and expert mode).

  If you choose first a whole HARD drive will be formatted and used for installing the OS. With the second (expert mode), it is possible to install the OS on the first partition. It is also possible to define what the partition size should be.

  Try it. It's very simple to do.

  Good luck

• Satellite P200-RT2 - need help with recovery

  I made a Boo-Boo and need advice/help to get things fixed.

  My husband has a Satellite P200-RT2 running Win XP 32 bit (included with Vista, but had been upgraded). The battery needs to be replaced, does not load and he made the mistake to disconnect while it was closing, but had not closed completely. Laptop computer would not start even in Safe Mode.

  So, I thought to try to insert a disc Win XP Pro thought, he would work to restart the computer and start again. No, he took over and completely restructured the laptop. If great, now have Win XP Pro on it, but can not load all Toshiba drivers that I downloaded from the Toshiba site.

  I was not in a position to know if there is a specific order to load the drivers... have been reading and wonder if the BIOS should be the first?

  Needless to say that the Toshiba recovery software went on the P200-RT2, I can't find a separate drive that supposedly it contains, there are only two listed drives, drive C and D (for DVDs).

  Toshiba tells me that Microsoft sells the recovery software, MS told me that Toshiba sells. There are sites online that have the recovery disc for Vista I could buy or download, but I'm not sure on those that are reliable/safe.

  Have to mention that I have a Toshiba laptop latest (L675 - 40 X, Win 7) and have the recovery disc for it.

  Is it possible to use these recovery disks for Toshiba software loaded on the old P200-RT2?

  Any help is greatly appreciated!

  If I could get the XPPro to work, which would leave as OS... but I don't know where to find the drivers.

  Satellite P200 - RT2 PSPB0C is a Canadian model.
  But the same model was released in Europe under the model number:E PSPB0

  You will find all of the Win XP drivers on the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

  Choose:

  • Archives
  • Satellite
  • Satellite P series
  • Satellite P200 PSPB0
  • PSPB0E
  • Win XP

• Satellite U940 - 11b - need help with recovery files

  Madam/Sir,

  I have a question about a failure U940 - 11 c.

  The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

  Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

  1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

  2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

  3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

  4. the disk is allocated:

  Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

  Hello

  I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
  If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

  Tom BR

• Compaq Presario v2000 need help for recovery

  Hello

  I recently got a virus on my laptop, and I am not able to get off at the stop. I just want to remove my computer laptop everything and restore the operating system. The Virus has disabled the start menu, and I have no recovery discs. Help would be amazing!

  I don't know if I've got some records or not, I will check! If this isn't the case, I will call HP, thanks!

• Satellite A80 - need help for recovery

  Hello

  I have a laptop Toshiba A80 and I'm trying to re - install the default operating system. I inserted the recovery disk and I click on continue to start the process, yes ok to wipe and then I get an error message. Error 1851 "file entered does not exist. Enter a different file name. I tried to format the hard disk without success.

  Any ideas would be a great help. Thanks in advance.

  Hello

  Do you use a recovery media for the first time?
  Can you please describe step by step how recovery facility and what is happening exactly?

• Need help for recovery software

  I want to get a recovery tools software for my Dell Dell Vostro 15 3558 Windows running on it. Saw a post here, please is the useful software?

  http://9jaspot.com/197/how-to-recover-deleted-files-folders-from-hard-drive

  You need a backup solution to ensure that you can recover your system or files on your system. EaseUS Backup is one. Macrium Reflect is another. They all have two free versions. You would need to check the characteristics of each to determine which one is best for you. I use Macrium Reflect and I love it. It allows to generate a startup failure of your hard drive version.

  JohnD

• HP Mini... Need help for recovery

  Hello

  I have a mini HP laptop. It runs incredibly slow and I want to wipe it clean to the factory settings. I have no system restore point.  The woman accidentally deleted after that the constant 'low space tools disk E:' kept popping up. So I went to recovery advanced and tried to do, but it asks me for the windows disk. Two issues here... I have no disc and HP Mini has no disk drive. What can I do?

  Hello

  If you can still boot into Windows, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click on management of the disks in the left pane and when loaded partitions, make a right click of the recovery Partition and mark it as 'active '.  Close all open windows and restart - if it worked, the laptop boot from the recovery Partition during the restart.

  If the above fails, you should be able to order a Kit USB recovery using the link below.

  Support of order recovery HP.

  If you have a problem with this link, order them directly at HP - once again, make sure they know you want the recovery Kit USB when ordering.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Re: I NB200-12R, I really need help on recovery!

  I bought my Nb200 - 12R For UK and right now I live in Egypt while everything was fine until I installed Partition magic 8.0 I got and error and I thought that its not important so I pressed OK, then my phone restarted I lost the D Partition, then restarted again all of a sudden I can't logging of windows there is something saying Boot-eating is missing or something like that so I decided to install cool new windows 7 and I did and I got back my scores.

  But here's the thing that I lost the recovery thing when I used to press F8 and now its not working like the old days...: /, some drivers does not work well.
  And I found there is that a folder called HDD Recovery sound 4.48 GB so my question is how can I use these files to my laptop...

  Hello

  > installed Partition magic 8.0 I got and error and I thought that its not important so I pressed OK, then my phone restarted I lost the Partition D

  The same thing happened to me when I resized the partition to install Win Xp to do a dual boot 7/Xp. I couldn't recover option f8 as it was before. Here in the forum, I read a thread where the user can restore:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57856&TSTART=0

  Personally, I have not checked, try it and tell us if it works, then

• Need help with Auto mode program HX30v

  Can someone (anyone!) Please explain the difference between mode Auto and auto mode program simply because of Sony?

  It seems to me that the automatic program sets the exposure and shutter speed and the user has nothing to say about it. For me, this is called the Auto mode. But then, what I know about it?

  I am trying to find a way to set the shutter speed (1/50) and opening (f3.2) and let the camera set the ISO. If someone can explain to me, I'd love to learn how.

  Don

  And to add on, regular self does everything automatically for you, Flash, metering, address points (at least I think they have to double check), but in General, everything is determined by the camera for what he thinks is best, ISO, opening and shutter.

  Automatic program allows you to set almost all except the aperture and speed.

  P / A / S modes work in unison with each other. Modes allow you to edit your flash, metering, etc. The only difference comes down to the 3 parameters fundamental, ISO, opening and shutter.

  P allows you to control ISO and automatically sets opening and speed.
  You can control opening and automatically ISO games and shutter.
  S allows you to control shutter and automatically ISO games and the opening.

  But I could be wrong. Very probably, and S allow you to define also the ISO, but the other setting of 3 will be automatic.

  Only series A and S of the program automatically

• Need help for recovery from msn and Xbox Live, think have been hacked

  I'm having a terrible time trying to recover my password, my game with Xbox Live, the period of my account, I asked for help on the phone several times Urgghhh! . I have a gold Xbox Live subscription and have not been able to PLAY!. 3 week or two, I created a new account so that I could try to change the information, so far failed to get anywhere, I think that my account has been hacked and my information stolen, please help!  Here are the two
  1 tries to recover - * address email is removed from the privacy... * A new created * address email is removed from private life * thanks for your help...

  You can try to consult the following link:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  And he steps.

• Need help for recovery

  I did a clean install of win7 ultimate (and it was a big mistake), the problem is that I don't have a product key for ultimate, I want to use my recovery image for restore (Home premium), I got in the patrtition of recovery and it is still there, but I can not initialize it to restore, is there any solution for this If I can install hp Recovery Manager to recover? My pc is touchsmart 600-1220

  Hello

  If you have already tried to make the Partition active recovery and it did not work, I think that you are the only option now is to order a set of replacement recovery disks by using the links in my previous post - using your recovery disks to reinstall the operating system will also reinstall the original software that came with the PC but also to recreate the recovery Partition.

  Kind regards

  DP - K