need help on car videography transitions

Similar Questions

• My car game needs help (swf in the post)

  Hello
  I have a car that I control with the arrow keys and I want the car to pull to the side when you press space.
  I have a picture of the hunters flash to png format that appears in the same place of the car even when I move the car to the right or left etc.

  The scene is seen from above.

  And for some reason the first flash of hunters is always slow when you hold the space key.

  It's here
  Caliber400.webs.com/car_game.swf

  Please do not move the car while testing the push function at the same time.

  This is the script that I need help.

  Sorry for my English.

  (will post if necessary fla).

  Have the muzzle flash as part of the drive to movieclip so that it moves with the car. Instead of moving out of sight in box 1, just do not have in frame 1.  Alternatively, instead of having two chassis as a movieclip, you could control its _visible property and avoid using a mount command to change the mounts.  Sometimes a change of framework can get delayed if there are a lot of things that could be happening when you say that it's slow.

• Mode of payment has been denied! Need help!

  I get notification of payment refused when I try to buy something, I tried to use 2 debit cards, and I had the same problem. This certainly isn't my problem of banks I have used my card all that time and one of them is a new card. Before I could easily buy things, but now I have this notification. I need help!

  Hey Pria06. Its bad to hear that you cannot use credit cards to buy things on iTunes. You may need to call Apple Care to support. Perhaps is there a problem with the system.

  They will help you

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help to install Vista Ultimate x 64 SP1 - error 0x800F081F - standard corrections do not work

  I have trouble getting Service Pack 1 installed on Windows Vista x 64 final.

  Current issue: SP1 does not appear as an update, and I have not yet installed.  Windows Update tells me that I'm completely up to date.

  History (memory, may be some errors):

  • Performed the new installation, including Vista Ultimate x 64 disk erasure (MSDN)
  • Updated to current with windows update
  • Installed Office 2007 Ultimate (MSDN) (don't know where update what happened)
  • Active Windows (could be a problem doing this after you install updates?)
  • Installed CPU usage, network, gadgets sidebar discs counter meter
  • Installed Live Family Safety
  • Installed Chrome
  • Installed Google Apps
  • Google Pack antivirus installed
  • Installed Google Earth
  • Attempted a manual installation of SP1 - fails with the error 0x800F081F
  At the present time, I can't get a manual of installation of SP1 to work, and Windows Update tells me that I am up to date.  -> System control panel tells me I'm running Windows Vista Ultimate, but does not list all service packs.  He also confirmed that the x 64 edition is installed.
  Steps for debugging:
  • Installed the drivers for the sound card motherboard
  • A ran complete chkdsk on drive to repair bad sectors
  • Ran the system file checker - find corrupted files, but can't fix
  • Journal CBS does contain no [SF] cannot repair the entries
  • Installed continues to update the system tool - tool does eventually make a update facility - who settle whenever I run

  System Information Link: http://www.filedropper.com/systeminfo

  [1] this is a new installation, so nothing has been pre-installed.

  [2] the only antivirus that was installed is the one that is included in the google pack.  I took it...

  [3] SP1 does not appear as an update

  [4] I'm strongly considering just clean wiping and [do a clean install]

  A1. If Vista was preinstalled on the computer when you bought it and you use the OEM disks (or hidden restore partition) to reinstall Windows, any antivirus free trial which initially is preinstalled on the computer will be reinstalled, but not valid.

  A2. You have therefore no anti-virus application installed. I see.

  A3. There are several prerequisite updates that must be installed before SP1 will be offered. See...

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  A4. Since you do not have an antivirus application installed, it would be your best bet. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need help burning a cd from Director of windows. When it burns, it leaves aside the last few photos on the cd.

  All the music Burns fine on the cd, but for some reason, simply of turns black towards the end of the program, leaving aside the last pictures of the film.  I need help!

  You may add too many files on the CD.
  And a project too complex can cause problems...
  too many transitions, effects, splitting, etc...

  And... It may be useful if you are going to... Tools / Options /.
  ... Compatibility tab and left click to restore all
  Default button.

  One or more files also may have compatibility
  questions:

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  Try to save the project in the. WMV video format
  in a folder on your hard drive and then burn the
  . File WMV to CD using other software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  See the following article:

  Movie Maker - video recording on a CD - R, CD - RW.
  http://www.windowsmoviemakers.NET/tutorials/HowToSaveCDRom.aspx

  The free software CDBurnerXP allows you to burn your video
  file on a data CD.

  CDBurnerXP
  http://CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata

  And... If you decide to create a video DVD... the
  following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.Digital-Digest.com/software/download.php?sid=1246&SSID=0&did=2
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Support stand not provided my replacement WRT-ngn350 - need help with Cisco contact

  Hello!

  I'm starting to feel like Michael Douglas in the movie Falling Down and need help.

  History:
  Finally, I sent to my bad WRT-ngn350 router and when I got the replacement of all but the plastic leg support has been included. I want to have my router stand up to save desktop space, but now I have no foot.

  "OK, should not be difficult to get Linksys to send me the missing foot stand" was my thought. Now, I called the online RMA and also emailed them and I get a similar response as Michael Douglas took with a smile

  I hear that I can't get the part because it is not on the list the content of the product. As this is * my * problem. I want the part and do not care if it's on a list or not. It is the part on the router in the image. I even asked the representative of Linksys to Google a little bit WRT-ngn350 and there are foot stands on almost all of the images and it is certainly included in the box. I was told that I could go nowhere elsewhere to help with that. I really some doubt but fail to find a channel of Linksys, which may be able to help.

  

  If some representative of Linksys sees this please help me!

  Thanks, Niklas

  RMA XXXXX - lack of router support/foot

  (Mod Note: under the guidance of the compliance of the directive.) E-mail deleted conversation.)

  SOLVED!

  The representative of Linksys has managed to dig a booth for me to a warehouse. It is mentioned that it is a unique thing because some parts should be sent. Don't forget to remove the stand and send only: router, power and eventually cable NW.

  Thanks to Linksys representative.

• NEED HELP - use in Animate gif files

  NEED HELP

  Reduce the Flash to animated GiF file file - reduce 65 KB without any loss of quality? How can I reduce a flash file for this standard of the industry?

  If you make an animated gif which must be less than 65 k, you need to use Photoshop, not animate and keep it under 5 total frames.  It won't be a complex animation with transitions and tweens; It would be fair to turn several different images/pictures.  Take a look at this tutorial I posted above to get an idea of the kind of thing you could do in a few images.

  For HTML5 Canvas in CC host, the source file is still a Fla, but published files will be HTML, Javascript, and images.  Do not build a HTML5 banner unless the plan of the record/media for what you work on him to permit.

  If HTML5 is allowed, you should know how ads are served (through Sizmek, DCM, Adwords, Flashtalking, etc.).  Each adserving company has slightly different requirements in terms of how files should be put in place and how clickTags should be implemented, so I can not give you any other advice, unless you know how your ads are served.

• HOW CAN I TALK TO A LIVE HUMAN BEING? I need help with what I bought.

  I just bought something that is supposed to allow me to convert a PDF file online to a word document and I don't know enough about computers to understand what you need to get. Help, please.

  Thank you

  Paul

  Hi Paul,.

  I'd love to help you here. Please visit to get started with ExportPDF | Adobe Community information on the conversion of PDF files to Word format.

  And, if you prefer, you can Contact Customer Care. Simply click on the blue button, still need help at the bottom of the page to find the phone and chat options.

  Best,

  Sara

• Need help for shopping online for students!

  Hello world!

  I am new to this forum, I try to search for my problem, but so far there is no clear answer

  Currently, I am a student in Poland, I would like to buy Creative Suite 6 Design and Web Premium.

  However, in Poland, there is no discount for students and the normal purchase price is high ridicule. (See image below)

  

  Fortunately, I have a friend who is studying nursing in an American college. I can ask him to purchase the student version. However, I get some confused. If someone could answer?

  (1) what step I have to do when you buy student version?

  (2) can I pay the product by MasterCard issued in Europe (in my case: Poland)?

  (3) after the purchase, can I register it in my name and not on behalf of my friend?

  I appreciate all help.

  Hello

  Here ends my knowledge, because I am a user like you and not an employee of Adobe.

  The best would be, whether you Contact Customer Care = http://helpx.adobe.com/contact.html > see all products... > select a product or service... > Creative Suite 6 Design or Web Premium aso. > Select a topic... > purchase... > I still need help... > cat (if it is 'open' Please use the cat. I had the best experiences. I quote Preran: the chat button is enabled as soon as there is an available to help agent.)

  Hans-Günter

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

• Need help with a few JS Bumpbox 2.0 installation

  I am trying to add a lightbox effect to PDF on my site, I found a Javascript plugin to http://www.Artviper.NET/Bumpbox-demo/index.html that looks like it should do the trick, but I can't make it work.

  To narrow the problem that I created a test.html file I pasted to the root of the folder I downloaded on their site (so I'm working locally on my desk at this time)

  My code is as follows... I feel I'm missing something super obvious, everyone see? (I have to define the .bump class in the css file?)

  Thank you in advance for him very needed help!

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  " < a href =" http://www.Artviper.NET/test.PDF "class =" bump"rel =" "800-350 > PDF file & raquo; < /a > < br / >

  < script type = "text/javascript" src = "js/mootools.js" > < / script >

  "< script type =" text/javascript"src="js/bumpbox-2.0.1.js "> < / script >

  < script type = "text/javascript" > doBump (".bump", 750, 500, ' 111 ', ' 900', ' 0.8 ', 5, 1, '333', 15, '000', 4)

  Fx.Transitions.Bounce.EaseOut,

  Fx.Transitions.Bounce.EaseOut,

  "images/demo_bg_bumpbox.png,"

  "top-left",

  "repeat-x"); < /script >

  < / body >

  < / html >

  These paths do not work because they point to the files on your local hard drive.

  Work within a well-defined local site?

  You save these javascript files in the js folder in the root of your local site?

  Correct path to the scripts for this test page should look like this:

  PS. do not add spaces in file or folder names.  It can create problems for the web files.

  Nancy O.

• Need help with the lettering complex

  

  Well, I try not to ask questions on this forum without trying things myself. I understand the time of other people very important. In any case, I took a class at a technical college and have a home classroom course that I'm doing right now. Unfortunately, at this time I need assistance. This logo needs to be recreated for vector art because it will be printed on a very large substrate. The customer has no access to vector art.

  I need help... I'm very proficient with the basic tools, the pen tool including. However, create complex lettering like that, I don't have a lot of experience with.

  The lettering is so my * right now. Also, I can imitate the gradient for bars decently, but get with the little rounded in angle gradient effect.

  I do not beg for help, but I might help! ?? I'm not looking for someone to do the work, rather to provide advice, so I can go my way through this. The customer contacted my boss today and he needs Monday for a meeting, so I'll have a project to do over the weekend.

  To print the black spot. Any advice/suggestions will be greatly appreciated. After work tonight, I'll go in my classroom in a book to pick up useful tips.

  Thank you all,

  Andrew

  There are many stylistic variations of this sort of thing. Your screenshot is too low to discern the exact treatment used for sure. Who says:

  This takes about 5 minutes and translates into a clean and economic construction with a minimum of access roads.

  That color is black spot.

  Two shades: Spot black and 20% tint of black spot.

  All paths shift (the inner paths of all the characters) are a single compound path and receive a fill of three-stop linear grad at 0 degrees.

  All original paths (paths outside of all the characters) remain separated and a three-stop linear grad to 120 degrees fill is applied (so each external character has its own grad which can be set individually).

  

  Small individual adjustment of the grads on each external character can match very closely the layout of tones of bevel of the original that you are trying to imitate. Keep things simple. Consider shading Emboss edges carefully and try to see them as linear graduates extending on the entire character and not as a pile small tedious individual details of packaging around the character. Then do shading with grad stops as little as possible. Understand how to "shake" or "refine" travel between the grad stops moving the gamma pointers that lie between each pair of grad adjacent stop biased towards a stop or another. More transitions - particularly on bevel veneers - the most 'sparkle '.

  JET

• I need help to uninstall FP, so I install FP or some hemlock

  I can't get flash player to install, uninstall so that I can install, as all the instructions tell us to do.  That crazy crazy pop up that tells you to install FP, you can only say no to so that it will go away makes me want to eat a bullet.  I can't take it much longer.  I don't know what to do.  And, the thing is that I do something a few weeks who has done everything stop and then some so he has started again. Sux to fix something, but know what you were doing, so that break you it again.  Anywho, I have tried everything to do a manual install with the Downloader, tried to download an old vs, but I couldn't find one that is compatible with Vista, which is my operating system (32-bit).  I went on the hyperlink provided on an another delimna people and the site says that I have the most up to date the PC vs.  But he does not appear in my list of programs is in my files on my C drive, nor a trace of the files in common.  It is not in regedit in local machine/software/adobe.  I can't find the stored programs to uninstall or install only what he saved to the desktop.  Wait, I rechecked all my programs and features, and it sees Flash Player 10 Active X and shockwave player 11.5, which are not found anywhere else in my computer.  I am so tired of all this.  I just need help.  Please, please please, it's horrible because you must have PS to run certain programs, but it will not run and I don't know if it's a question of Adobe, Windows question or problem of Vaio.

  Well, I sort of Thoth who would take care of her. One set of wings tho is thin. You won't know what to do without all these popups, LOL

  eidnolb