Need help on TCP/IP port multi Client-Server
Hi all, I'm trying to develop a client-server application to disseminate data on a few numbers of random ports (defined by myself) to the data on the server TCP stream (IE another computer) in LabVIEW. So far, I created my app using the examples OR for 'Simple Client + Server data' and it works fine. I also understand that VI 'TCP Listen' could not listen to the TCP 1 connection only and a way around this is to use the idea of queues to receive & process the incoming data. The disadvantage of the idea is that the 'port' basic (IE original port) must be the same (on each client TCP) with the TCP server and it is not suitable for the use I have planned.
Basically on the side of TCP server, I need to graph/control data on different port numbers that are currently broadcast in real time to client TCP one computer. Is this possible in LabVIEW?
Anyone (gurus OR incl.) advise and point me in the right direction?
* lost *.
Hello
http://zone.NI.com/DevZone/CDA/EPD/p/ID/2739 Here you can download this component. But you can also use the TCP icons which is available in the data communications > Protocals > TCp for communication and to read and write data using flattened string Variant. I have attached a small example where I'll copy a constant string to the PC to check the connection between the client and the host server. Hope this helps you.
Tags: NI Software
Similar Questions
-
Need help on transfer of files from one server to another server.
Hi all
I need help on transfer of files from one server to another server (Unix box to another Unix machine) using jdeveloper and BPEL process.
I'm new to these technologies, can you please help me on this. If you encounter documents please share it with me.
We use BPEL and Jdeveloper 10.1.3.3.0 version
Thanks in advance!
Concerning
Vincent
Published by: user10263255 on 15 Sep, 2008 12:25Vincent,
One of the options I can think of is creating mount points on the boxes of unix and then using the File adapter.
-
Need help with configuration on cisco vpn client settings 1941
Hey all,.
I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...
If anyone can help with orders?
I need the installation:
user names, authentication group etc.
Thank you!
Take a peek inside has the below examples of config - everything you need: -.
http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html
HTH >
Andrew.
-
need help to reactivate the windows 2008 R2 server?
reinstalled the computer has not been reactivated, said: license limit is higher.
call customer service, began just after 30 minutes of waiting and issue describing, then call completed. twice already.
need helpHello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
Need help to reset/compensation port security on a PowerConnect 35XX
I implement port security on our network, and I've never worked with these before switches. I'm used to the Cisco CLI, who was the command exec "int sticky clear dry port", but it doesn't seem to be anything of the sort on the CLI of Dell.
Here is the config, I have in place on the switchport in question.
dot1x multiple-host
safe standing of port security mode
port security throw
For the moment, that the port has done what is supposed to to, but remove the configuration of the interface completely that I am unable to find how the CLI reference or online at how 'quickly' to reset the port.
Any help would be appreciated.
Do not take into account. I found buried in the CLI reference command.
There are actually two commands necessary to reactivate the interface
"dot1x to re-authenticate ethernet [port]".
'set interface active ethernet [port] ".
Thank you
-
Need help to add serial port to a virtual with "Output to the file" computer in PowerCLI
I have a requirement where I have to add a serial port to a virtual computer that is an Ubuntu operating system and the port type must be 'output to the file"with a file name specified in a data store on the same ESX host.
Can anyone provide me with a script of powerCLI for this please?
Thank you very much
Suparna
I advise you to upgrade to 4.1 PowerCLI.
If this is not possible use the attached script that works for versions pre-version 4.1 PowerCLI.
____________
Blog: LucD notes
Twitter: lucd22
-
Need help in the migration of windows 2003 server Oracle database server 2012
Hello
My environment is oracle database 9i in windows server 2003, we want to move to Windows 2012 since the end of support for windows 2003.
Please give me a plan, what no need to make the first database upgrade or upgrade of windows, what are the things will have to be considered at the level of Oracle database?
Any help would be appreciated.
Thank you
Lherault
Hello
Given the version of your database is 9.2.0.8 and you want to upgrade to 11.2.0.4 and 9i database is running with log mode archive
I have plan.
(1) your database 9i working with the log mode archive Server 2003
(2) you can take backup of Database 9i with RMAN
(3) you can restore the backup to the base in 2008 (by using 11.2.0.4 software)
(4) when the recovery is complete, you can open the database with resetlogs option upgrade.
change the upgrade of open database resetlog.
(5) once the database is open, you can run 'Upgrade PROCESS'
(6) it should complete your upgrade in 2008
If you think, restoration and recovery will take time, so you can install physics Eve with 11.2.0.4 version in 2008 for the Database 9i.
During failover, you can recreate the controlfile and open the database ' change the upgrade of database open resetlog. "
you will need to check the compatibility with the help from under documents
Reference list Oracle database upgrade (Doc ID 730365.1)
Note 551141.1 : Server Upgrade/Downgrade Compatibility matrix data base
-
I need help to find my incoming and outgoing server address are
I am trying to set up my email and asked what my incoming and outgoing servers are how will I know
E-mail account:
http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/
Link above has an easy to follow Guide to set up Windows Mail.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Contact your ISP (Internet Service Provider).
They offer your broad band/Dial-up connection.
Ask them to:
username
password for your service account to wide band/Dial-Up with themServer of incoming POP3 mail
outgoing mail SMTP serverThe above information is required to set up Windows Mail.
ISPS are usually happy to help you set up your email account.
See you soon.
Mick Murphy - Microsoft partner
-
Need help to write to Oracle and SQL Server in the Oracle triggering
We have a third which feeds data for us. Their client application feeds directly to some source tables in our Oracle database 10g. We have triggers on those tables that sort and treat lines as they come.
We have a new operation and try to write some of these incoming data now to a SQL Server database through heterogeneous services - essentially the same exact data in two databases. I have a related database that works very well for the selection, but I've never tried to write Oracle PL/SQL to write in a DB SQL Server 2008. My first attempt was met with the following error: "ORA-02047: impossible to join the current distributed transaction.
I found another thread where they say that the only way to do it is by using a stand-alone transaction, but they do not give an example. Here is the section of relaxation that I use:
Can someone point me to a way to accomplish this simple insertion?select to_char(new_date,'MM-DD-YYYY') into sql_txt from dual; insert into mancamp_location@sqlweb ("UnitID", "ManCampID", "Lat", "Long", "UpdateDT", "VehSpeed", "VehDirection", "Landmark") values (v_truck, f_unit, f_lat, f_long, sql_txt, f_spd, f_dir, f_ldmk);
An example of a standalone trigger is:
Suppose you have a table in Oracle:
CREATE TABLE emp_sal
(
EMPNO NUMBER 4,
SAL NUMBER (7.2));and a similar table in a SQL server:
SQL Server:CREATE TABLE emp_sal
(
EMPNO NUMERIC (4).
SAL NUMERIC (7.2));Then, you can create an insert trigger that replicates the data:
CREATE OR REPLACE TRIGGER dg4odbc_repl AFTER INSERT ON emp_sal
FOR EACH LINE
DECLARE
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
INSERT INTO 'emp_sal"@MSODBCSQLSERVER_DG4ODBC_EMGTW_1123_DB '.
VALUES (: new.empno,: new.sal);
COMMIT;
END;
/-Note the validation, otherwise risk of ORA-6519
When you now insert a record into the Oracle database:
insert into emp_sal values (1234, '1200,89');
the trigger is activated and inserts the record in SQL Server:
Select * from 'emp_sal"@MSODBCSQLSERVER_DG4ODBC_EMGTW_1123_DB;
EMPNO, SAL
----- -------
1234 1200.89It works fine when you post data insert, but as soon as restore you the insert only data Oracle will be cancelled - data will remain as long as the independent transaction dedicated to its SQL Server insert:
insert into emp_sal values (1384, '1200,89');
Rollback;
Select * from emp_sal;
EMPNO, SAL
----- -------
1234 1200.89Select * from 'emp_sal"@MSODBCSQLSERVER_DG4ODBC_EMGTW_1123_DB;
EMPNO, SAL
----- -------
1234 1200.89
1384 1200.89So I strongly recommend to use the DG4MSQL gateway which is able to participate in distributed transactions and allows validation/restore transactions.
DG4ODBC lie on OTN (http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html-online check out the "See all" link for your favorite platform), cloud of delivery of software Oracle (https://edelivery.oracle.com/) or "My Oracle Support". My Oracle support welcomes the latest version 11.2.0.3. In My Oracle Support goto patches and updates, then search for 11.2.0.3 data set Patch 10404530patch: 11.2.0.3.0 PATCH SET for ORACLE database SERVER, choose your preferred platform and see the Readme which CD contains the gateway software.
Published by: kgronau on April 24, 2012 08:44
-
Need help to change the files on my server
I just created my first web page. I am self-taught on CS3 and I can't figure out how to make my site updated with the changes that I made for my GAZILLIONS of errors.
I downloaded officially my Web page yesterday. When I checked my mistakes on the web I fixed them in cs3, linked to my site remote and dragged/used 'put' function on all .html files, I changed. My browser cache of dumping and reloaded on my site to see the same thing, I put on there the first time. I tried to re-loading of the entire site (I think it's what I do, but it does not take nearly as long as the first time I put it on the web) using 'put' for my complete local record, never repeated the whole process and still see no change.
Anyone want to help a frustrated beginner? the site is www.smartgirlguide.com and I thank you in advance.Create a new file with a unique name and upload it to the remote site. Do
you see it in the www folder when you look at the remote files in DW
After downloading it? You can browse to this file using
http://www.example.com/yourfile.html?If you don't see the file on the remote site, there is something wrong
with your FTP. If you can see here, but you can't browse, then
you have selected the wrong host directory (you will then use the)
in the host directory public_html folder).--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================="ClaireLille" wrote in message
News:fpl7ne$OKJ$1@forums. Macromedia.com...
> Ok. I did and synchronized my sites the and remote. I'm still not
> getting the actual changes on the live site.
>
> I have to do something with my hosting company
> (bluehost.com)? -
Need help in the startup for the IntergratedWLS server problem.
Hi all
IAM using JDeveloper 11.1.1.3.0 and when my server integrated WLS 10.3 iam getting the following error running.
< 2 August 2011 11:59:25 IST > < opinion > < Log Management > < BEA-170019 > < C:\Documents and Settings\krishnss\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
< 2 August 2011 11:59:27 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 2 August 2011 11:59:27 IST > < critical > < security > < BEA-090404 > < user weblogic is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of policy server. >
< 2 August 2011 11:59:27 IST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. check the log file full stacktrace
>
< 2 August 2011 11:59:27 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
< 2 August 2011 11:59:27 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
< 2 August 2011 11:59:27 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
Process is complete.
Please let me know what root the cause of the problem and how to solve it.
Kind regards
Suresh CamilleSuresh,
Remove the DefaultDomain directory and JDev will recreate the domain for you.
John
-
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
-
Need help with the port forwarding for a XBox remote Streaming
I have a router R6200v2 and need help with port forwarding.
I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere
http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/
I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.
Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?
Hi @varxtis,
You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.
1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)
2. Select the type of service (TCP, UDP or both)
3 entry 5050 times a start external Port and external endpoints.
4. Select the IP address of your XBOX.
5. Select apply.
6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.
Kind regards
Dexter
The community team
-
What are TCP/UDP ports must be open for version 4.8 of the VPN Client?
What are TCP/UDP ports must be open for Cisco VPN Client version 4.8 working?
Thank you
Normally, you need the following ports and Protocol:
UDP 500
UDP 4500
ESP
In this case, you are using IPSec over TCP, you must open the port TCP 10000 or any other port that you want to use for (its configurable) IPSec connections.
-Kanishka
-
Need help configuration IOS IPsec to enable communication between the VPN client
Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".
The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.
Thanks in advance...
Hello
Try this: -.
local pool IP 192.168.1.1 ippool 192.168.1.5
access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">
access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">
access-list 1 permit 10.10.10.0 0.0.0.255
< lan="" behind="" the="">
ISAKMP crypto client configuration group vpnclient
key cisco123
ACL 1< binding="" the="" acl="">
!
--------Done-------------
If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had
Assuming that the NAT of your router is
overload of IP nat inside source list 111 interface FastEthernet1/0
!
! - The access list is used to specify which traffic
! - must be translated to the outside Internet.
access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255
Above two statements are exempt from nat traffic.
access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">,>
I would like to know if it worked for you.
Concerning
M
Maybe you are looking for
-
I designed a Web site that shows in all browsers except firefox why?
I created a site for my husband, who opened in firefox before sent to the host, but now it is downloaded, all other browsers will open it but not firefox and I don't know why. It comes up with the error message.
-
Windows Search works only not XP
Search for Windows - windows search button does not work, research and execute check boxes have disappeared from my Start menu options - how can I get them back
-
A backup can be infected by viruses/malwares?
Original title: Windows backup. A virus/malware free at the back of the folder windows hard disk even can be infected by viruses and malware. Or this type of backup is immune to the virus. ? Thank you.
-
Network with wireless bridge and Repeater cable
Hello I'm about to set up a network composed of 3 routers. The first router R1 is in the basement of my house, the second router R2 is on the first floor and the third router R3 is on the second floor. My goal is to have a single network in the House
-
Original title: domain Active Directory unavailable Services I have an HP laptop, works with Vista Business SP2, all MS etc updates Now, I get a message "Active Directory Domain Services" unavailable when I try and find the printer and cannot print t