need help on the database connection

Similar Questions

• Need help fixing MySQL Database connection with Dreamweaver CS5

  I need to find a way to fix this error:

  "Your PHP server does not have the MySQL module loaded or you cannot use the mysql_ connect functions (p)."

  The site that I am doing this is usuing wchosting services gabessdsp.wchosting.co.cc. I can't connect to the databases that I do and I auadrouple all my verified information. How can I know how to fix this? Everywhere wherever I look it tells me to change something in the php.ini file, but I'm not running even the server. They say that they do not allow remote connections to phpmyadmin and this could be the cause of my problem?

  According to the headers on the url you gave the server runs MySQL PHP 5.2 libraries were not included.
  It would be necessary to contact the administrator of the host, to see if the libraries can be installed or PHP upgraded to 5.3.
  HTH

  -Rb

• need help for the VPN connection

  Hi guys

  can you help with that?

  I installed a VPN connection, but the tunnel shows that status: upward and the protocol description: down.

  debugging is turned on and displays following-

  ITS has applications pending (xx.xx.xx.xx local port 500, xx.xx.xx.xx remote port 500)

  DEC 20 02:39:26.762: ISAKMP: (2142): sitting IDLE. From QM immediately (QM_IDLE)

  02:39:26.762 20 Dec: ISAKMP: (2142): start Quick Mode Exchange, M - ID 3357871564

  02:39:26.762 20 Dec: ISAKMP: (2142): initiator QM gets spi

  DEC 20 02:39:26.762: ISAKMP: (2142): Pack xx.xx.xx.xx my_port 500 peer_port 500 (I) sending QM_IDLE

  02:39:26.762 20 Dec: ISAKMP: (2142): sending a packet IPv4 IKE.

  02:39:26.762 20 Dec: ISAKMP: (2142): entrance, node 3357871564 = IKE_MESG_INTERNAL, IKE_INIT_QM

  02:39:26.762 20 Dec: ISAKMP: (2142): former State = new State IKE_QM_READY = IKE_QM_I_QM1

  02:39:26.794 20 Dec: ISAKMP (2142): packet received from xx.xx.xx.xx dport 500 sport Global 500 (I) QM_IDLE

  02:39:26.794 20 Dec: ISAKMP: node set-419503660 to QM_IDLE

  DEC 20 02:39:26.794: ISAKMP: (2142): HASH payload processing. Message ID = 3875463636

  DEC 20 02:39:26.794: ISAKMP: (2142): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3

  SPI 2561284360, message ID = 3875463636, a = 0x87D0CFC8

  DEC 20 02:39:26.794: ISAKMP: (2142): removal of spi 2561284360 message ID = 3357871564

  02:39:26.794 20 Dec: ISAKMP: (2142): node-937095732 error suppression REAL reason "remove larval.

  02:39:26.794 20 Dec: ISAKMP: (2142): node-419503660 error suppression FALSE reason 'informational (en) State 1.

  02:39:26.794 20 Dec: ISAKMP: (2142): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

  02:39:26.794 20 Dec: ISAKMP: (2142): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-1177810765

  02:39:46.798 20 Dec: ISAKMP: (2142): purge the node-138734109

  02:39:56.763 20 Dec: % s-6-IPACCESSLOGRL: the rate limited or missed 2 sachets of access list record

  DEC 20 02:39:56.763: IPSEC (key_engine): request timer shot: count = 2,.

  local (identity) = xx.xx.xx.xx:0, distance = xx.xx.xx.xx:0,

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4)

  the config is following.

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key xxxxxx address xx.xx.xx.xx

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac vpnset

  transport mode

  !

  Crypto ipsec tech profile

  Set transform-set vpnset

  !

  !

  my-map 20 ipsec-isakmp crypto map

  defined peer xx.xx.xx.xx

  Set transform-set vpnset

  match address 155

  Hello

  As for your question, you can have more than 1 card crypto on the interface.

  However, you can use the same card encryption for several strategies. You can change the ma-card to vpnmap.
  In this way the two are enabled on the same interface, with one having a higher priority than the other.

  So if a package came from inside, the first crypto ACL interface is checked and then the next and so on. The first match found is chosen for the IPsec negotioation.

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I need to Martineau manage database connection?

  I have problems with a stored procedure that returns data to see PS take 20 seconds to return the data (big sp) for CF but the database connection is left idle after the sp finshes and the data are passed to CF, as we can see from MS SQL studio management.

  I need to manually manage the database connection? I thought that the data source CF to manage all this?

  Yes. I think it's an option check box under each data source. Something like "Maintain connections..."

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock.  Photos will read the iPhoto library and create a new library of pictures of him.

  Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system.  If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• need help with the backup of the copy of the OS

  Hi team,

  I bought the new Presario CQ40 and I need help regarding the opertaing and activation office 2007 system backup, please respond as soon as POSSIBLE.

  Thank you and best regards,

  Nancy (Julien).

  Are you needing information to create the recovery disk set? HERE

  As for activation Office 2007-if you paid for a license extend the 60-day trial version, simply enter your key when asked to activate. If you have not purchased a full license, you should be the link for the purchase of Ms. You can also buy Office 2007 locally(probably cheaper) and just use him license key to activate your preinstalled version.