Need help recreate my logo

Similar Questions

• Need help, recreate an effect.

  Hello

  Our Film/TV club hired an artist to create a logo for our program, and we are trying to change a little. Here's the original photo

  Imgur: the most impressive pictures on the Internet
  

  And we try to rotate the text "buena" and "film/tv" autour. Our only problem is that we have trouble finding how to recreate the same tthat performed the "buena" has with the black border around and below.

  Thank you so much in advance!

  

  

• Need help with my logo

  Hello!

  I've been at this for hours now, but can't seem to get the same effect as the picture I have attached. How to make a logo text having the same effect? I don't think it's as easy as I thought. In this case I would really appreciate if someone could show me how or point me in the right direction. Maybe in conversation, Skype etc.

  Best regards

  Philippe

  

  I would like to make your shapes in illustrator in particular glass of Cognac. Illustrator is limited on an inner glow, so that you can reasonably get without having to spend a lot of time.

  

  In Photoshop with some layer styles, you get closer.

  

  But no doubt you must rasterize the layer and dodge tool allows to get more blobbing effect of the white inner glow. This will give a warmer feeling as the light golden.

  

• Need help with logo infinity

  I'm trying to draw a sign simple inifinty in Illustrator on a MacBook Air. I drew a rough one myself with the pencil tool and I turned all the way fidelity upward to smooth. But I don't have the logo, own, that I was going to. So I erased the sign of infinity and has attracted half of the infinite sign with the pencil tool and fidelity intensify all the way to smooth, copied and he has fallen on the other side to complete the logo of infinity. But it was not yet even, as the central point was not really at the center of the logo. Basically, I need help making the perfect infinity sign.

  I'm new to Illustrator, and still trying to understand allows so all information. Thank you.

  the free plugin smart SubScribe has a tool of tangents sloppy

  http://www.astutegraphics.com/software/subscribe/

• Need help with logo twitter avatar

  Hello

  In Illustrator has done a logo for a Web site and the need to reduce the logo for 75pix x 75pix for a twitter avatar.

  The original logo is 1167,5 x 1023,94 pix pix. When I scale down to the 75 pix x 75 pix Dimensions (with the transformation Panel) and expand the Illustrator logo with the zoom tool looks all OK, but when I go to save for Web and devices and check the pix pix 75 75 x and save and look at the result I see only a few pictures strange pixels.

  Do I did wrong?

  A help is very appreciated!

  When you zoom in on this little graphic in Illustrator, it is on screen (converted to pixels) at the point where you look at it.

  When you convert to pixels, 72 pixels are what he is. No re-rendering, only enlarge pixels when you zoom in. The result show you here is pretty much what you will be able to get out.

  This logo is not suitable for smaller sizes. It will not be suitable for printing on small things (like roller pens and gifts) either. I even doubt that it works on a business card.

• Need help with the lettering complex

  

  Well, I try not to ask questions on this forum without trying things myself. I understand the time of other people very important. In any case, I took a class at a technical college and have a home classroom course that I'm doing right now. Unfortunately, at this time I need assistance. This logo needs to be recreated for vector art because it will be printed on a very large substrate. The customer has no access to vector art.

  I need help... I'm very proficient with the basic tools, the pen tool including. However, create complex lettering like that, I don't have a lot of experience with.

  The lettering is so my * right now. Also, I can imitate the gradient for bars decently, but get with the little rounded in angle gradient effect.

  I do not beg for help, but I might help! ?? I'm not looking for someone to do the work, rather to provide advice, so I can go my way through this. The customer contacted my boss today and he needs Monday for a meeting, so I'll have a project to do over the weekend.

  To print the black spot. Any advice/suggestions will be greatly appreciated. After work tonight, I'll go in my classroom in a book to pick up useful tips.

  Thank you all,

  Andrew

  There are many stylistic variations of this sort of thing. Your screenshot is too low to discern the exact treatment used for sure. Who says:

  This takes about 5 minutes and translates into a clean and economic construction with a minimum of access roads.

  That color is black spot.

  Two shades: Spot black and 20% tint of black spot.

  All paths shift (the inner paths of all the characters) are a single compound path and receive a fill of three-stop linear grad at 0 degrees.

  All original paths (paths outside of all the characters) remain separated and a three-stop linear grad to 120 degrees fill is applied (so each external character has its own grad which can be set individually).

  

  Small individual adjustment of the grads on each external character can match very closely the layout of tones of bevel of the original that you are trying to imitate. Keep things simple. Consider shading Emboss edges carefully and try to see them as linear graduates extending on the entire character and not as a pile small tedious individual details of packaging around the character. Then do shading with grad stops as little as possible. Understand how to "shake" or "refine" travel between the grad stops moving the gamma pointers that lie between each pair of grad adjacent stop biased towards a stop or another. More transitions - particularly on bevel veneers - the most 'sparkle '.

  JET

• My Apple Watch doesn't work despite the charge. Need help!

  MY Apple Watch feeds not on despite the load? Need help!

  Have you tried to force the reboot of the Apple Watch?

  Forcing Apple Watch to restart: press and hold the side button and the digital Crown at the same time for at least ten seconds, until the Apple logo appears.

• Computer laptop touch screen 15: need help - restore Partitions, OS system, start-up and drivers!

  [Need help]

  Device name: laptop touch screen, Energy Star, 15.

  Model number: 15 - f023wm

  Device status:
  [Grandma] "I broke the internet.
  [Me] "No, I have demolished just any chance I had as a computer programmer.
  I'll never do it to heaven now... »

  You want to come: difficulty this laptop!

  -Packing plant (Reset/retrieve)

  -Retrieve/Re-restore boot loader

  Retrieve/recreate/Re-restore all original scores.
  -Retrieve / Re - restore all the Original system & hardware drivers.

  -Retrieve/Re-restore Windows 8.1.

  -Possibly find computer Tech/Geek fellow/Pal.

  -Learn something new! (Not including the common sense).

  Explanation:
  -J' was too high as he tried to become the next Bill Gates and create a calculation method in which the processor completely laws of physics bi-passes.

  Topical issues:

  (1) I have little experience, I'm sure compared to most of the users on this forum; However, in the College computer Programmning.

  ---> Very adept in acquireing newly introduced information & request a great sense of understanding of puzzled, abstract and largely serious concepts. (It will be just a little easier than most to explain a simple fix).

  (2) I deleted all partitions, including the system files, System opperating, some methods of starting, all the drivers, and to add to the mess, the existing partitions are not yet check the size or formatting - I'm sure.

  ---> (Drive C is 400 GB;) Drive D is the main partition with only 20 GB)

  (3) any chance of installation/download are only feasible when my boyfriend does everything it does and 'fixed' the laptop.

  ---> Cell phone MAY start, can use internet and MAY be able to download 5 pictures before the system shuts down and the other requires a few hours to wipe the minimum amount of space on the hard disk before you reinstall Windows.

  (4) Windows 7 is the only OS (so far) that we are able to install; We have no other disks, but Windows 8.1, I think, was the original Opperating system and look forward to this return.

  (5) I don't know yet how I will receive notification here on these forums. I'm drunk at 05:59, so I'll find out tomorrow.

  ---> Assuming that I remember I wrote it.
  
  And I think that's all that I need a little help with if you want messages me or live chat to help solve this problem, I think that Skype is aloud; and in all the uncertainties, it is listed on my profile.

  Thank you, & your best.
  Caleb D. Parker
  @CiDiParks25

  CiDiParks25

  What will work restores your computer to its original factory state using HP recovery media.  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  The link is on the software page and download drivers for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7137590/model/7484025

  Once there, scroll to the bottom of the page and you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• need help! brike S6000

  Hi every1 I have flashed my device and bad recovery image collapsed I tried to restart it I had meta and recovery mode, but the recovery screen shows these three operations: recovery, quick mode, normal mode by pressing any botton it hangs for minutes then don't reboot loop, no logo no sound screen led just empty my q is cannot I he unbrick bootable sd will do the job How? I have the stock firmware great need help please thank you

  Use this tool to install drivers for your tab. See here: -.
  http://Forum.xda-developers.com/showthread.php?t=1983470

  Using that you can install the drivers for any device. Now, I think you would be knowing how flash ROM flash SP tool. If this isn't the case, then after return.

• Need help with research

  I used to be able to type a file name in the search bar in my Start menu, and he would bring all records with this word.  Then I could right click and it show me the location of the file, or I could just open it.  I did something to my settings, and can not find a way to get this functionality back.  Can someone help me?

  Hello

  You may need to recreate the search Index.

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  See you soon.

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• Extended attributes are incompatible - need help urgent please!

  Hello Microsoft Forum,

  I want to keep this short, as I now have serious problems.
  I have Windows 8 Pro, with each update installed.
  I was looking through the net by chance, then the messaging with a friend.
  My friend has design a logo, which he sent via Skype in a .png format.
  When I double click on the logo, the problems started. Everything has become very slow.
  The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
  The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
  Image viewer of course could not open the music file.
  So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
  This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
  In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
  I'm the admin user and UAC is set to the last row (no notification).
  In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
  I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
  I have, however, never changed anything with my theme, the sound was enabled by default.
  Setting the sound theme "None" did nothing, just like the definition of the theme options.
  Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
  Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
  With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
  This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
  The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
  I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
  I wish I had of emergency aid, as this is my main work computer
  . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
  Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
  Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
  I really want to reinstall everything, I hope that a solution to this.
  Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
  Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
  Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
  Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
  Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
  I hope that my question is understandable
  . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
  Kind regards
  Richard

  Hi Richard,

  Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

  I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Need help with mobile layout

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match these mobile Office layouts

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

  Thanks in advance!

  TheOriginal150mph wrote:

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match thesemobile Officelayouts     

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

  .main-nav a {}

  display: block;

  text-decoration: none;

  / * padding-bottom: 15px;   */

  Padding: 12px 0;

  }

  Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

  .product-image {}

  float: none;

  Width: 50%;

  margin: 0 auto 20px auto;

  }

  As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.