need help running at 100%

Similar Questions

• Need help running and installation of cloud/creative applications

  Hello, I am a student trying to creative cloud and several adobe applications, work at home so I can't do a 5 hour trip return to school and facing a lot of problems to just running programs.

  first set up: I'm using windows 7-64 bit with a small 100g SSD main (C :) and a terabyte of secondary drive for most of my data (d :))

  first of all, I downloaded CC some time ago and it crashed when opening simply tried several times and did not work, so I was forced to use auxiliary programs to simulate the demands made in the classroom for a modest success.

  now, after a few updates and a new installation of windows 7, I thought I would try again. I downloaded CC and started installing some applications that I need (flash, first, photoshop, illustrator, and consequences). However I don't have enough room on my SSD, so I removed the programs and reinstalled in a file on my D: drive. Flash and the Prime Minister has worked for a few minutes before CC informed me that I would not be able to use other programs because there was not enough space available to update.

  I have 10 GB of space on my SSD, I understand there are some information that must be stored on the C: drive, but why it takes up to 10 GB of space?
  to use 1-2 applications without having update problems, I uninstalled Photoshop and Illustrator, as I will now need them later in the half and CC as a whole simply refuses to work. All loading the CC program causes an error. I tried to reinstall and restart the computer. Nothing helps. so I uninstalled all the programs adobe and CC, but CC was still send me errors in the uninstall.

  I tried more than 10 times to redownload/install CC and more I could do is get the CC itself at startup program, but it immediately gives me "DOWNLOAD ERROR" (without error number) and simply contact customer.

  I'm currently stuck at this step with no idea what to do, any help would be appreciated, because I have homework that needs to be done at home and can not do without these programs

  You can work around the cc desktop app and install directly from prodesigntools.com

  If you follow the 7 steps you can directly download a free trial here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Need help running push Widget Widget SDK sample

  Hello

  The Widget SDK is my first foray into developing for BlackBerry.

  I downloaded the installer that bundles of the Eclipse IDE (because I had problems with the update of the eclipse) since http://na.blackberry.com/eng/developers/browserdev/eclipse.jsp Simulator that runs when I launch a widget indicates that it is the Smartphone BlackBerry 2.13.0.56 Simulator

  I tried to run the example (found on http://docs.blackberry.com/en/developers/subcategories/?userType=21&category=BlackBerry+Widgets&subC...). I have the widget running in the Simulator and the Swing app that runs server-side code works as well, but the messages do not get pushed to the device.

  Here are a few questions & information:

  1. documentation of this example seems to assume a MDS standalone and not as a plug-in - IDE he talks port 8080, but I found that my instance of MDS is tuned to 28080

  2 access localhost 28080 shows me the status of SDM which is

  Build number: 93
  Build version: 5.0.0.93
  Construction date: 2009/08/12

  3. the example instructions say:

  Open the rimpublic.property file, located in the subdirectory MDS\config of the BlackBerry Email installation directory and Services MDS simulators.   Make sure that the line 'push.application.reliable.ports = 100' is NOT commented.

  I did find this line (I found the MDS file with the file with this name under \plugins\net.rim.browser.tools.wcpc_1.0.0.200910291414-35\wcpc\mds\config) so I added it myself.

  4. I am running Win 7 Ultimate and tried this after letting a MDS access by adding an exception and more completely by disabling the firewall.

  5. for the RIM option in server code to push, I get the following exception in the console:

  Sending to http://localhost:28080/push?DESTINATION=2100000A&PORT=100&REQUESTURI=localhostjava.io.IOException: Server returned HTTP response code: 400 for URL: http://localhost:28080/push?DESTINATION=2100000A&PORT=100&REQUESTURI=localhost
  

  6. for PAP, I see:

  [B@186d4c1[B@186d4c1 sending PAP request to http://localhost:28080/pap; pushId = pushID:64424432--asdlfkjiurwghasfContent-Type: application/xml; charset=UTF-8
  
  http://www.wapforum.org/DTD/pap_2.0.dtd"   []>
  
  --asdlfkjiurwghasfContent-Type: text/plain
  
  pap--asdlfkjiurwghasf--
  
  [B@f9f9d8[B@f9f9d8[B@15b7986[B@15b7986
  

  7. on the console for the DMS, I see:

  <2009-11-28 03:49:48.683 EST>:[115]:::
  <2009-11-28 03:49:48.694 EST>:[116]:::
  <2009-11-28 03:49:48.697 EST>:[117]:::
  <2009-11-28 03:49:48.697 EST>:[117]:::
  <2009-11-28 03:49:48.698 EST>:[118]:::
  <2009-11-28 03:49:48.702 EST>:[119]:::
  <2009-11-28 03:49:48.704 EST>:[120]:::
  <2009-11-28 03:52:49.193 EST>:[121]:::
  

  8. After awhile, when you use PAP, the Eclipse console displays "connection of Notification period. Restart of... "and this message keeps repeating.

  So, if someone could point me in the right direction to get it to work or give me an idea of what I'm doing wrong, that would be great! I really don't know too much about the development of BlackBerry or SDM or push so I do not know where to start.

  Thank you!

  Hello

  It turns out that there is a known issue in the connection services MDS where environmental push imitate them you have to take a few steps.

  Once you have the open Simulator, you must have the device Simulator to connect through the SDM a couple of times so that he knows that this is actually.

  What we have seen that the work, should open the browser and go to a link like http://www.google.com a couple of times and then try and push.

  some of our developers have seen that sometimes it can take a few tests so that the MDS detect the Simulator.  We have a bug connected with the MDS team on this topic.

  Tim

• Need help, run the stored procedure in ASP.

  I have a web page in which I would use a query like http://ereply.us/q/l.asp?id=383966476 string

  It directs the user to a page that contains the following code:

  <!-queue = "database_connection.asp #include" - > "
  < %
  If not isempty (request.querystring ("id")) then
  SQL = "exec dbo.fp_qr_code @sequence (request.querystring ("id")) =" "
  
  If rs.state = 1 then rs.close
  RS. Open sql, conn, 3, 2
  
  If rs.recordcount <>0 then
  session("Name") = rs ("name")
  session("JobID") = rs ("jobid")
  session("SEQ") = rs ("seq")
  
  If rs ("id") <>"" then the answer. " Redirect ("index.asp")
  end if
  end if
  % >

  It queries a SQL database to return the value of 'name '. In turn, according to the code of the user should be directed to 'Index.asp' that contains:

  Welcome < % response.write (session("name")) % >

  And the page you should see the page with"Welcome".  Instead, I get a server 500 error.  The stored procedure runs as a stand-alone query in SQL Management Studio.

  Any ideas would be greatly appreciated.

  I solved this.  This is the query that worked:

  < %="">< br="">SQL = "" exec fp_qr_code ' "& request.querystring ("id") &" ' " < br=""> set rs = Conn.Execute (sql) < br=""> if rs.eof then response.write ("no registration") < br=""> while not rs.eof" ""
  response.write (("name") rs)

  response.write (("imgname") rs)

  response.write (rs ('url'))

  RS.MoveNext
  Wend < br=""> %>

• Need help to install iTunes64Setup on Windows 8 PC; error: "this application can run on your PC.

  Original title: program programs application Applications compatibility

  Please, I need help to install iTunes64Setup on my PC Windows 8, but I'm having trouble.

  Get the error message: "this application can run on your PC.
  E-mail address is removed from the privacy *.

  Your configuration file may be an older version that is no longer supported

  Get the latest version: http://www.apple.com/itunes/download/

• Need help with deleting/closing 63 process running on the computer always?

  MY COMPUTER COSISTANTLY HAS ABOUT 60 PROCESSES RUNNING ALL THE TIME. I HAVE READ ALL THE INFORMATION ON WHAT THEY ARE AND WHAT THEY MEAN, BUT I STILL DON'T KNOW WHAT PROCESS I MUST CLOSE AND FEAR THAT I WILL END UP SHUTTING DOWN THE ONE WHO SHOULD RUN. IM NOT VERY SAVVY COMPUTER SO I DO NOT REALLY UNDERSTAND WHAT WANTS ALL SAY, BUT I DID RESEARCH ALMOST ALL PROCESSES TO SEE IF IT WOULD HELP ME DISTINGUISH WHICH THOSE DI NO NEED TO RUN WELL, IT HAS NOT HELPED. PLEASE IF ANYONE CAN HELP ME CLOSE / REMOVE PROCESSES THAT MUST RUN AND HELP ME FIND A PERMEANT WAY TO PROGRAMS/PROCESSES IN ORDER TO CLOSE WHEN NOT IN USE. THANKS FOR ANY HELP IT IS GREATLY APPRECIATED!

  Hello jacquelinek1104,

  Below, I've added a link with another similar to your question.  Hope this helps you.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-many-processes-should-be-running/e82e627d-89b0-432c-9E6F-f689686398d4

  Thank you

  James

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• I Iconia Tab A500, running 3.0, need help for upgrade by using a microsd card, got Acer download update

  I Iconia Tab A500 running 3.0, need help update, I downloaded the entire updaes list in the supprt of acer, all versions, 3.0, 3.1, 3.2 and 4., I read on the acer support somewhere I can use a microSD card to update my device, as acer provides automatically, when I try it says 'poor network connection '. moving instead of anthoer. ", I have to update all the updates that are listed, or can I only update, using the 4. 0? to get the last known update. I also downloaded, 'Documents, applications, drivers, patches and O.S... How do I intsaller all these updates, I think that running the lowest version available, please help me... Thank you in advance.

  There are some instructions step by step on the site, but basically you check out the file "update.zip" download, copy to the root of a FAT32 formatted microSD card, then start in recovery mode (press one of the volume buttons [which it depends if you are landscape or portrait mode] and hold, then the power press and hold). From there, you can choose to update in the zip file it finds on the map.

  It is important before you have the correct version of the update, it's different for different regions of the world, and you will not be able to upgrade the (for example) Brazil version from the US site.

• improve slow system performance... I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  . I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  Each computer has different startup programs - if you if you stop that you need you can turn it back on. See step 5 to turn them off.

  Windows 7 is slow

  (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.

  (2) if the computer has only 1 GB or 2 GB of RAM, try adding more RAM.
  (3) make sure that your drivers are up-to-date.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  (4) defragment your Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  (5) reduce the start up programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  (B) on the general tab, click Selective startup.
  (C) then change the tabs by clicking on the start tab
  (D) uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
  (E) click OK, and then restart the computer.

  (6) disable some visual effects in Windows 7
  There are a lot of Visual effects that can be disabled safely to speed up Windows 7.
  A. Click Start, right click on "Computer" and select "Properties".
  B. click on "Advanced system settings" in the left pane to open the"System Properties".»
  C. Select the "Advanced" tab from him. Then, under 'Performance', click on 'settings '.
  D. now uncheck all the options that you do not want to use (some options disables Aero).
  E. restart the computer.

  (7) open the resolution of Performance problems
  A. open the Troubleshoot utility of performance by clicking on the button start.
  (B) in the search box, type "convenience store" and then click Troubleshooting.
  C. under system and security, click on search performance issues.

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...

• Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Vanle

  Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Paris looks Jokum

  Bay3Bob - you are great! Thanxxx :-)

• Question: I need help to install CS4 on a pc running Windows 10.

  Question: I need help to install CS4 on a pc running Windows 10.

  Hello

  Please Download CS4 products

  Kind regards

  Sheena

• I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise.  I tried two routes in vain.  I have the installation CD, there no AutoPlay.  I run Autoplay.exe in the root directory, I'm greeted, I ch

  I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise. I have in vain two routes. I have the installation CD, it does not autoplay. I run Autoplay.exe in the root directory, I'm greeted, I choose English, I accept the EULA, I get the choice window Install / explores, with the install button already selected, click the button in Photoshop, CD towers, and nothing happens. In the 2^nd attempt I run Setup.exe in the directory of Photoshop and nothing happens at all the. I'm never even offered the opportunity to enter my product code. What should I do?

  There is probably a problem of compatibility between the old software and the more recent operating system.

• NEED HELP URGENT! 5.2 Lightroom runs slow on my new PC

  Hi all!

  Thank you for the time you spend reading this! I am very grateful!

  A few months ago, I decided to connect my laptop to a Full HD monitor so that I can hopefully get a better resolution when editing photos. I bought the monitor but BAM! It was all lagy and I realized that my laptop is not good enough to run things smoothly (although it may do so at its native resolution perfectly 720 p) so, as a student, I started to work and to invest the money to buy a computer case and use it with the monitor that I had already bought for no reason!

  So, I built my new PC recently and I put the (relatively) decent material about it but I still have the same problem

  Here are the specs of my PC:

  Windows 7 SP1 64 bit

  RAM: 8 GB DDR3 1600

  Processor: AMD FX-8320 8-core 3.5 Ghz

  MB: ASUSTeK COMPUTER INC. M5A97 R2.0 (Socket 942)

  Graphics card: 1024MB ATI AMD Radeon HD 7700 Series (GB)

  Hard drive: 500 GB Western Digital SATA 3

  Here's the video of my delay in the computer:

  http://www.YouTube.com/watch?v=xtaKV1wH9pY

  (the video is from 4.4 lightroom but 5.2 is the same)

  I know that some of you will say that's not SSD, so it's slow, but I don't think that my hard drive is causing a problem. Laptop from my friend who has specifications lower than mine (a 2.5 HDD), lower map low graphics + CPU (but Intel i7) performs much better and is much smoother (is almost perfect) in the culture and the change of exposure.

  What do you think is the problem? It's shit AMD processor that is the cause, or is - this lightroom which is not compatible with my processor? What parts should I change as appropriate, or do I return everything and work with lower resolution on my laptop

  I really need help with this, because if I can't solve this problem, I have to return the PC and get refund because there will be no use for me.

  Very well! So, what's up on my new processor and motherboard! I will also avoid AMD for the rest of my life (as long as I use Lightroom!)

• Run multiple chooses due to several input values (need help in SQL)

  Hello
  
  I would need to run multiple SQL select statements I get input of several results of the subquery. In my test case, I get three 3 results of the subquery
  
  Select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = "IHS" AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED
  The complete query is:
  
  SELECT SDE_ID, SERVER_ID, REGISTRATION_ID, TABLE_NAME, CONNECTOR, START_TIME, NODENAME OF THE
  
  * (select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = 'IHS' AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED)) *.
  
  Can someone help me to get the appropriate SQL code?
  
  Thank you
  Dejan

  Right. I should have put a comment explaining that. I used the name A_TBL_PROCESS because the WHERE clause has
  'AND table_name like '% _TBL_PROCESS' ' then yes that should be a table name that will be selected.