Need help to change the menu outer

Similar Questions

• Need help to change the properties of the menu widget bindings Muse

  I have a widget menu that links to the pages of Muse.  The customer wants the links to open new tabs.  Currently, the links open in the same window.  I'm trying to change this property.  Can you walk me through it please?  Here is a picture of the menu if that helps.

  

  You can do it with the help of the menu manual. A little extra work, but it will give you desired results.

  1. go in the options panel of the menu by clicking on the blue circle on the edge of the menu.

  2. Select the type of Menu as "manual." This will leave you with only a menu item.

  3. Select the Menu item and click + button to create several menu items for your menu.

  

  4. Once your menu is ready, then you must then link with the pages. To link them select each item in a menu and the link with the pages by using the drop-down list hyperlink.

  

  5. While linking, you must select the option 'Open link in a new window or tab in' in the hyperlink menu.

  

  Kind regards

  Vivek

• Need help to change the background and more

  Hey everybody! This is my first post on this forum so excuse me if its not very good.

  Now, at school, we experience a realization project and I and my group want to impress the teacher really a lot of movies. We decided that our film will be defined on a boat on the way to the sink, and before it sinks you get to know the different families/people on the boat and how all this turns out to these families when the boat begins to sink. But the problem is that we don't have a boat. But I have after effects, and a normal size sheet that is completely blue, which can be used as a blue screen!

  I know how to chroma key easily, but some scenes are in need of a big blue screen we have
  So I spent a few hours now looking for a tutorial on how maybe change the background without anything like a blue screen , but I can't seem to find a good tutorial that helps me with what I want help with.

  E.g. one of our scenes are cars climbing on the boat and the blue screen is not big enough to cover the entire car and the Earth under our car is gravel, and I can't have that. So is there anyone here who knows a few videos on the internet that could help me, or a kind soul who could write me a text tutorial on how to do this?
  / Friendly, Axel.
  (btw I'm Swedish so excuse for bad spelling/grammar)

  There are many times when a green screen is not wide enough to cover all the material. You end up using a combination of green screen and Rotoscoping. In your car drive you to the boat example would position the blue screen before the blue screen was behind the windows of the car because that would be the most difficult parts of the car for Rotoscoping in hand. It would be easy enough to rotoscope the wheels and underside of the car.

  Take a look at this video from Lynda.com - a really great source after effects training. It will show you how the various masks are used to clean up a green screen when it does cover the whole.

  There was a lot of publicity for Singapore Airlines called Across the World who had an actress works continuously with a shot that she moved seamlessly from San Francisco to Paris to Venice and across transitions, she walked in front of a green screen that was just big enough to cover here head and shoulders because it is very difficult to rotoscoping hair and hands when they move. I took a quick glance for the behind the scenes video that was produced when they initially released the commercial but couldn't find the exact. If you look closely in this video, you will see people moving green screens around as she walks.

  This technique is still used on hit movies. Note here the green screen that does not hide the bottom of everything, just the parts that would be very difficult if not impossible to Rotoscoping.

  

• Need help to change the new "new tab".

  My new custom tab, google, is no longer opens. New tab in Firefox is shit, how can I change this back?

  I used the topic: method of config to change it for a while, but now the chain is simply ignored.

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your home page on the new tab - if Google is already your homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• Need help to apply the menu option

  Hello

  you will need to apply the menu option by clicking on 'V' image and close the menu option by clicking on the image itself. I did everything but not able to do this menu option can you please help... I have attached my code

  I have

  Have you tried the code that I wrote for you?

• Need help to change the default output page WebHelp

  Hi all

  I use RoboHelp 10 and try to generate a WebHelp output. I'm unable to change the default value, the destination page. I checked all the relevant discussions in this forum, but I still have the issue.

  I want my default destination as 'introduction' page in the webhelp output. So I point the "introduction.htm' in WebHelp settings by virtue of the"output folder and Start Page"as shown in the below figure and"record and produce ".

  

  The generated output is always taking me to another topic as shown in the illustration below.

  

  The URL in the address displayed correctly, but the subject does not change. I need someone to help me solve this problem.

  Thank you!

  Hello

  The name you specify is the start of production, not the topic file that is responsible: the file used to launch help.

  Go to content categories, choose the category and select the 'default'.

  Take a bow

  Willam

• Need HELP to change the NAT type to open on Linksys E2000.

  I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?

  Follow the below mentioned settings, then check.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box.

• Need help to change the admin settings

  I bought a used dell optiplex 755 from a local community college and need to change the admin settings so I can download the programs and files because it deletes every time on restart.

  Do you a big favor and restore the computer to its factory settings.

  See: http://www.dell.com/support/Article/us/en/19/SLN291879/EN

  If for any reason that does not work (for example, the school removed Dell 'restoration' software), go to the Community College of the it Department and ask them nicely to restore the computer to a functional State.

  NB: If after restoring to factory State, you have any software "free trial" - any software particularly virus - be sure to uninstall.  The free trial period will have expired for a long time and the presence of antivirus software, even if idle, can cause a lot of problems.  Most of the antivirus software requires special removal tools provided for free by the Publisher of the antivirus software.  For example:

  https://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

• I need help to change the administrative password

  How can I change the administrative password when the computer was a gift and I do not know the password. I need the password to set anything in the computer, including the time?

  Can you log on under an admin account - any admin account? If this isn't the case, then you must ask the former owner for the password.

• script need help to change the VMinfo Get to include no RDM

  Hello world

  Could someone help me with the script which retrieves information for VMGuests. I would like to modify this script to include NO RDM, if possible.

  Thanks for your help

  # The Get-VMInformation function gets information of VM
  Function Get-VMInformation {}
  {in process
  Get - VM | Sort-Object-property name. `
  Select-Object Name,@{N="UsedSpaceMB; E = {[math]: tour ($_.)} (UsedSpaceGB * 1 Ko, 0)}}, NumCpu, MemoryMB,.
  @{N = "SnapshotSizeMB"; E = {[math]: round (($_ |))} Get-Snapshot | Measure-Object-SizeMB property-sum). Sum, 0)}}
  }
  {end}
  "" | Select-Object @{N = "Name"; {E = {"{0:yyyy - MM - DD} ' f (Get-Date)"}}, UsedSpaceMB, NumCpu, MemoryMB, SnapshotSizeMB
  }
  }

  # Get all information from the virtual machine and export it to the output file
  Get-VMInformation |
  Export-Csv-path $OutPutFile - NoTypeInformation - UseCulture

  Try this

  # The Get-VMInformation function gets all the VM information function Get-VMInformation {
      process {
          Get-VM | Sort-Object -Property Name | `        Select-Object Name,
          @{N="UsedSpaceMB";E={[math]::Round((Get-HardDisk -VM $_ | where {"RawPhysical","RawVirtual" -notcontains $_.Disktype} | Measure-Object -Sum -Property CapacityKB).Sum/1KB)}},
          NumCpu,MemoryMB,
          @{N="SnapshotSizeMB";E={[math]::Round(($_ | Get-Snapshot | Measure-Object -Property SizeMB -Sum).Sum,0)}}
      }
      end {
          "" | Select-Object @{N="Name";E={"{0:yyyy-MM-dd}" -f (Get-Date)}},UsedSpaceMB,NumCpu,MemoryMB,SnapshotSizeMB
      }
  }
  
  # Get all the VM information and export it to the output file Get-VMInformation | Export-Csv -Path $OutPutFile -NoTypeInformation -UseCulture
  

• Hello. I need help to change the text in the browser tab.

  Greetings,

  I downloaded a model and have successfully transferred. However, the text in the tabs of the browser continues to say "Temple free blah blah."

  I would like to say the title of my Web site.

  Could someone please walk me through this task elementry?

  Best,

  CHADRICK

  A link would be useful, but I think you are referring to the title of the page. Right-click on your pages in plan view and access the properties of the page and change the name to what you want.

• Need help to change the default fonts

  Most of the time, standard models for subjects, maps, books, etc. are very good for us. However, we want to change the default values of Minion Pro and Myriad Pro to our company by default fonts. I tried various paragraph tags in the files of the editing model. However, when I click on update, I get a warning message that makes a global change in a structured document could cause unexpected results. So I cancelled the change. What is the right way to do this? If not, is there an easy way to change the default fonts?

  Thank you.
  Jerome

  Marc,

  If you have a structured model created using a definition of the element (EDD) document, the police can be defined in ESD. If you use different fonts for different items (chapter, title, document, para, for example), each element can be defined accordingly. Here is an example of one of the JED I use and the font settings for the item Para ESD. So when I import this ESD in my document or template, the paragraphs will have an Arial font size 12 points.

  

  Hope that makes sense.

  Janice

• Need help to change the setting of the function key in Windows 8, help?

  Hey, I bought a HP laptop yesterday (which I am very satisfied) and decided to play Guild Wars 2 and all of my favorite PC games. In the game, I discovered that all of the F buttons work without pressing FN, which is annoying. So although I am tyring to combat various things I'll always turn down the brightness and turn off the wireless so if I could know how to swap it around, so when I press FN I can turn down brightness etc that would mean I could now use the F buttons normally any help would be nice thank YOU!

  Hello

  You should be able to change this setting in your Bios menu - see the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Need help to change the billing address country. not by phone

  Hi, I am currently a student in London, but my country on behalf of Adobe is set to the United States I would change for the ok, but the only way I can do is call Adobe? My phone provider has blocked international call so I can't call and livechat seems to be declining. Who can help with this? Perhaps miss something, because I do not understand why changing country needs to be this difficult. It's quite urgent because I would buy tonight. I'd appreciate any help I can get.

  Thank you

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

• Need help to change the files on my server

  I just created my first web page. I am self-taught on CS3 and I can't figure out how to make my site updated with the changes that I made for my GAZILLIONS of errors.
  
  I downloaded officially my Web page yesterday. When I checked my mistakes on the web I fixed them in cs3, linked to my site remote and dragged/used 'put' function on all .html files, I changed. My browser cache of dumping and reloaded on my site to see the same thing, I put on there the first time. I tried to re-loading of the entire site (I think it's what I do, but it does not take nearly as long as the first time I put it on the web) using 'put' for my complete local record, never repeated the whole process and still see no change.
  
  Anyone want to help a frustrated beginner? the site is www.smartgirlguide.com and I thank you in advance.

  Create a new file with a unique name and upload it to the remote site. Do
  you see it in the www folder when you look at the remote files in DW
  After downloading it? You can browse to this file using
  http://www.example.com/yourfile.html?

  If you don't see the file on the remote site, there is something wrong
  with your FTP. If you can see here, but you can't browse, then
  you have selected the wrong host directory (you will then use the)
  in the host directory public_html folder).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "ClaireLille" wrote in message
  News:fpl7ne$OKJ$1@forums. Macromedia.com...
  > Ok. I did and synchronized my sites the and remote. I'm still not
  > getting the actual changes on the live site.
  >
  > I have to do something with my hosting company
  > (bluehost.com)?