Need help to detect/set up my card wireless in Fedora 14

Similar Questions

• I need help my Webcam setting and put in place.

  I NEED HELP MY WEBCAM SETTING AND IMPLEMENTATION. I BOUGHT IT USED

  I need help my Webcam setting and put in place.

  Thinking about ask you for help using Bing, Google or any search engine you want to use.  Try entering "set up the webcam" in your search parameters.

  Or ask for help on the Web site of the manufacturer of the webcam that you have purchased.

• Need help to see if the graphics card is compatible / finding new food please

  Hi, I use currently a HP ENVY Office 700-214 I bought a few months ago and recently decided to update the graphics card so I can continue to play with the higher settings.

  I found a 'Nvidia geforce 760' graphics card which I think should be an upgrade of what I use now, but alas, I have to improve my diet in order to use it because it requires a minimum of 500W. So I was wondering if someone could help me with a few questions.

  1: the Nvidia geforce 760 map is compatible with my computer?

  2: could I possibly get links to a few feeds compatible with my computer? (If posible may 1 with a bit more 'W', then I need minimum.) So if I update in the future more I'm already covered?

  Thanks for the help, I appreciate it

  Hello

  Boot in the BIOS (F10) and verify the information in system information. What is the level of BIOS version? If your PC is using version 8 or 80 and above all the NVIDIA 760 should work unless the version of the video in the video card bios expects something different.  In this case, check with the manufacturer of the video card for repair.

  The CX600 Corsair or CX600M will give you enough power head room.

• Need help with performance & setting in an environment of memory data storage/warehousing

  Dear all,

  Nice day.

  We had successfully migrated from a 4 node rack Exadata V2 to a quarter of 2 node rack X 4 - 2 Exadata. However, we are facing some problems with performance for a few charges while others were indeed marked a good improvement.

  1. the total memory on the BONE is 250 GB for each node (two of compute nodes for a quarter of rack).

  2. you would be grateful if someone could help me with the best equation to calculate the SGA and PGA (as well as in the distribution of the shared_pool, large_pool etc.) or automatic memory management is recommended?

  3. we run the exachk report which proposes to set up huge pages.

  4. when we tried to increase the SGA to more than 30 GB system does not do. We set however of the PGA to 85 GB.

  5. in addition, we noted that some of the queries with joins and indexes take more time.

  Any advice would be greatly appreciated.

  Best regards,

  Vikram.

  Hi Vikram,

  There is no formula on SGA and PGA, but best practices for environments OLTP is amounting to give memory (which can be up to 80% of total RAM of the server) you can do 80% gas and 20% of the PGA. Envs Data Warehouse, values are like PGA SGA and 40% to 60%, or it may be up to 50% - 50%. In addition, some disencourage docs you keep the auto memory when management database you use a big SGA (> 10).

  You use a CCR environment, you need to configure huge Pages. And if the systems are not allowing you to increase the memory, just take a glance on the semaphore settings, probably, they establish lower values. And for the poor performance queries, we need to explain the structure of the table plans, and you also analyserions if smart scan is the game.

  Kind regards.

• need help with a micro kingmax sd card work on W510

  So my friend gave me a card of 128 MB kingmax micro sd for my W510 when I put it in the backlight lights up but its does nothing not chime no small note saying its nothing works. My homies phone is a scoop LG and that could be the problem why its not working?

  Beto-M

  You may need to reformat the card from your phone.

  But first save the files/images that can be on it from the other phone (if they are important) by using a PC card reader, if you are using the format option, it will give the memory card clean format with appropriate for your phone directories.

  • The W510 user guide page 81 show a few basic methods to access your memory.
  You can use upward on a 8 GB card in the W510.

  Poko

• HP Pavilion 500-274ea: Hello, I need help please I installed the graphics card and nothing comes only a black screen

  Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?

  http://support.HP.com/us-en/document/c04177680

  It comes to my pc

  I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job

• Need help, PNY optima 2 GB SD card

  I have a PNY Optima 2 GB SD card, but every time I plug my SD card out of my camera in one of my computers it happens the same thing that my other SD cards but when I try to open a message box comes up and tells me to insert a disk? And when I put a camra it tells me to format the card, but when I try to format my computer says it can't (Windows could not format the card)?... Can I get help

  Hello

  You may have to use third party formatter.

  You can check this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/uanble-to-format-my-SDHC-card/88dd1f38-0a55-4C9F-be1e-7b2e6eee61db

  It will be useful.

• Need help with the set of breaking records showing

  Hi all
  
  I have a situation, as display a set of data with limits (as the end number of the cheque check number) at once, if the records in the table are in order. If there is break in the sequence, just above the check at the end number check number gets split upward according to the number of break.
  
  Example:
  
  /**********************************************************************/
  case 1:
  
  Cheque_Number Cheque_Date Cheque_Amount
  
  1 5000 15 - Sep - 2011
  2 5000 16 - Sep - 2011
  3 5000 17 - Sep - 2011
  4 5000 18 - Sep - 2011
  5 5000 19 - Sep - 2011
  6 5000 20 - Sep - 2011
  7 5000 21 - Sep - 2011
  8 5000 22 - Sep - 2011
  9 5000 23 - Sep - 2011
  10 5000 24 - Sep - 2011
  
  Result of the query should be like,
  
  Total amount recompemnse using check number from 1 to 10 is of RS. 50 000 / -.
  
  /**********************************************************************/
  
  2nd case:
  
  Cheque_Number Cheque_Date Cheque_Amount
  
  1 5000 15 - Sep - 2011
  2 5000 16 - Sep - 2011
  3 5000 17 - Sep - 2011
  4 5000 18 - Sep - 2011
  10-19 - Sep - 2011 5000
  11 5000 20 - Sep - 2011
  12 5000 21 - Sep - 2011
  52 5000 22 - Sep - 2011
  53 23 - Sep - 2011 5000
  54-24 - Sep - 2011 5000
  
  Result of the query should be like,
  
  Total amount recompemnse using check number from 1 to 4 East of 20,000 rupees.
  
  Total amount recompemnse using check number from 10 to 12 is 15 000 rupees.
  
  Total amount recompemnse using cheque number 52 to 54 East of RS. 15 000 / -.
  
  /**********************************************************************/
  
  case 1, I am able to achieve, but the second I couldn't.
  
  Please help me in this.
  
  Kind regards
  Arumugam

  SELECT bank_code, (chq_no), MAX (chq_no), MIN MIN (chq_dt), MAX (chq_dt),
  SUM (sum)
  FROM (SELECT bank_code, chq_no, chq_dt, amount,
  MAX (marker) OVER (PARTITION BY bank_code ORDER BY chq_no)
  marker
  FROM (SELECT bank_code, chq_no, chq_dt, amount,
  CASE
  WHEN ROW_NUMBER () OVER (PARTITION BY bank_code ORDER BY chq_no) =
  1
  THEN 1
  WHEN chq_no
  -LAG (chq_no) OVER (PARTITION BY bank_code ORDER BY chq_no) >
  1
  OR MONTHS_BETWEEN
  (chq_dt,
  LAG (chq_dt) OVER (PARTITION BY bank_code ORDER BY chq_no)
  ) > 1
  THEN ROW_NUMBER () OVER (PARTITION BY bank_code ORDER BY chq_no)
  END marker
  OF knm_test))
  GROUP BY bank_code, marker
  ORDER BY 1, 2

• I need to download CS5 on my new laptop computer.  I have my serial number recorded, but I don't know which version I have on my desk.  Standard version?  Beyond that, I need help download and set up my licenses CS5 on my new laptop.

  Help please

  Hi janeth3327022,

  I see that you have Photoshop CS5 for windows, you already have the serial number, you can download it from here https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  However, on your new computer laptop, you should make sure that CS5 is compatible, you can see here https://helpx.adobe.com/photoshop/system-requirements.html#main_Older_Versions

  Let us know if this helped!

  Kind regards

  Aurélie hamadi

• Need help to set a DELETE statement.

  I have a table that contains the records of files. Files come in a bouquet each week. So, we need to delete records from a table to the corresponding fields and load the table with up-to-date data.
  
  In doing so, the DELETE statement takes a long time. Need help with this setting.
  
  Here are the details.
  
  (1) total number of records in the table: 23 million records.
  (2) approximate records deleted each time: 500 K to 1.5 million.
  (3) table is partitioned on a PERIOD key. That is, each partition will have the data for a given period.
  (4) table is not indexed
  (5) removal occurs on a combination of 2 fields (PERIOD + BATCH).
  
  Here is the query and the plan:
  
  ===========================================================
  
  SQL > EXPLAIN PLAN SET STATEMENT_ID = 'TSH' FOR
  2 REMOVE / * + PARALLEL(DETAIL_UNKNOWN,10) * / u DETAIL_UNKNOWN
  3 WHERE u.FLBATCHID = 'PCAFRINTERMAR1105' AND u.N_PER6 = 201214
  4;
  
  He explained.
  
  SQL > SET LINESIZE 130
  SQL > SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY ('PLAN_TABLE', 'TSH', 'ALL'));
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Hash value of plan: 2400300449
  
  ----------------------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |
  ----------------------------------------------------------------------------------------------------
  | 0 | DELETE STATEMENT. 596K | 12 M | 838 (9) | 00:00:12 |
  | 1. REMOVE | DETAIL_UNKNOWN |
  | 2. SIMPLE HASH PARTITION | 596K | 12 M | 838 (9) | 00:00:12 | 6. 6.
  |* 3 | TABLE ACCESS FULL | DETAIL_UNKNOWN | 596K | 12 M | 838 (9) | 00:00:12 |
  ----------------------------------------------------------------------------------------------------
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Name of the query block / Alias object (identified by the operation identity card):
  -------------------------------------------------------------
  
  1 LED$ 1
  3 LED$ 1 / U@DEL$1
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - filter("U".") FLBATCHID '= 'PCAFRINTERMAR1105' AND 'U'." N_PER6 "= 201214)
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Projection of the column information (identified by the operation identity card):
  -----------------------------------------------------------
  
  2 - (cmp = 2, 3) "U". ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  3 - « U ». ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  
  27 selected lines.
  
  ===========================================================
  
  Need your suggestions on how the query / table can be tuned.

  Hi Anand,

  I wanted to check why your tkprof Watch report two executions of the statement:

  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Execute      2   2315.71    2480.17          0       3351     624489      611765
  

  In fact, it there was only a single execution of the DELETE statement. The trace file begins with a call EXEC of any statement without call analysis

  *** TRACE DUMP CONTINUED FROM FILE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_ora_241708.trc ***
  
  EXEC #1:c=20000,e=13996,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=32472879711702
  =====================
  PARSING IN CURSOR #2 len=68 dep=0 uid=72 oct=42 lid=72 tim=32472883567994 hv=740818757 ad='0'
  ...
  

  TKProf aggregates this EXEC call with call EXEC of the DELETE statement because they have the same location of cursor (#1), he thinks it was the same cursor.

  PARSING IN CURSOR #1 len=93 dep=0 uid=72 oct=7 lid=72 tim=32472889974030 hv=1242910589 ad='e5979d80'
  DELETE from detail_unknown where n_per6 = 201214 and FLBATCHID = 'PCAFRINTERMAR1105'
  END OF STMT
  PARSE #1:c=0,e=11462,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=32472889974024
  ...
  EXEC #1:c=2315710000,e=2480213492,p=0,cr=3691,cu=624489,mis=0,r=611765,dep=0,og=1,tim=32475370187626
  

  So, the question about two executions is closed - there was only a single run.

  The performance - 2315,71 seconds of time processor is absolutely huge for such amount of work. It looks like a bug.

  First, I propose to check the time without compression. If your environment allows this kind of testing try to decompress the partition and re - run on unpacking data DELETION.
  10.2 find the name of the partition

  select partition_name
    from dba_tab_partitions
   where table_name = 'DETAIL_UNKNOWN'
     and partition_position = 6
  

  After that

  alter table DETAIL_UNKNOWN modify partition  nocompress;
  alter table DETAIL_UNKNOWN move partition ;
  

  and run again the button DELETE.

  What is the operating system on the server?

• Need help setting bios to boot from the cd. I did already but the laptop does not start again for cd player.

  Hello

  I forgot that my administration windows log password after the holidays.  I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd.  He just continued boot from the internal hard disk.

  The cd is an image and it is bootable on my desk.

  The model of laptop: laptop HP ENVY m6

  Product number: C2N77UA #ABL

  BIOS version: F.25

  Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz

  OS: Windows 8.1

  I only did a password reset disk (I'm learning the hard way now!).

  I don't want to do a "System Recovery" because I have some data on it.

  I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.

  I just need help / instructions to set the bios for laptop can be started from a cd.  I also tried to boot from a key USB but the laptop kept begin its internal drive.

  Help, please.  Thanks a ton!

  Ted

  Hi Ted,

  You are welcome

  Boot into the bios menu and go to the very section where you have disabled the Secure Boot.

  Find an entry called materials and this value to Activate.

  Save the changes and exit the bios.

  Follow the previous procedure below:

  Insert the bootable disc of Ophcrack and laptop stop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• I need help with a question command line syntax

  I got 3 issues that need to be entered in command line / syntax.
  I had no training in command line and need help for that setting in the command line syntax.
  (The IP address is a fact).
  This will be done also on a PC that requires elevated permissions. So if a programmer can zip through it in no time it would be much appreciated. Perhaps one without high and an example with.

  1 setting up daily ping test to a server with the IP 10.254.254.1 which will be composed of 1 000 ICMP echoes.
  2. establish daily ping tests to a server with the same IP address which will consist of one hundred 1 500 bytes ICMP packets.
  3 configure these run every day and are output to a text file.

  Hi Matt,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• I create my web and download it to Dreamweaver, but it came as I wanted. Now, I need to change the page, but it does not allow me to do so because that is block need help

  Hello

  I create my web and download it to Dreamweaver, but it came as I wanted. Now, I need to change the page, but it does not allow me to do so because that is block need help

  First, set the folder of your site.  Go to Site > new Site > tell DW where to save files to the local site.

  

  http://layersmagazine.com/defining-site-Dreamweaver.html

  Nancy O.

• Need help with identification card WiFi Acer Aspire V Nitro VN7 - 792G - 79 LX

  I just got an Acer Aspire V Nitro VN7 - 792 G - 79 LX that I bought recently a few days ago. I'm not thrilled with Windows 10, so I installed Windows 7 x 64 on it, instead. I only had a chance, until I had to go to work (I drive a semitrailer tractor for a living, and I am currently on the road), to find Windows 7 drivers for the network Realtek card in it, and I now need to find Windows 7 x 64 drivers for the WiFi card. I need help to identify the make and model of the wireless card that my laptop has, because when I go to the Acer website and enter my serial number, then search for drivers, it lists drivers for WiFi cards of 4 or 5 and 2 different Bluetooth drivers.

  I'm sure that my Nitro V17 has an Atheros WiFi Qualcomm card, and I found the information on another site (no Acer) that my card Atheros WiFi Qualcomm model number is NFA344.

  Anyone can check that it is correct?

  Thank you!

  Yes, sometimes setting Legacy can pose problem hardware/drivers.

  on ACPI\MSFT0101, try this:

  https://Downloadcenter.Intel.com/it/download/23091/Intel-me-9-driver-management-engine-1-5-MB-di-int...

  topic of IUSB3\ROOT_HUB30 & VID_8086 & PID_A12F & REV_0031 & SID_103B1025, try this:

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-control...

  on PCI VEN_8086 & DEV_A170 & SUBSYS_103B1025 & REV_31

  It's the technology Intel (r) Smart Sound but I can't find a driver for windows 7

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.