Need help to extract a CAB Secure Digital file in the Windows XP computer.

Similar Questions

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• I need help to cancel my account creative cloud I wrote the wrong email address when I created it

  I need help to cancel my account creative cloud I wrote the wrong email address when I created it. Is there a way I can do?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I need help to reinstall photoshop. I don't have the original disc. How can I reinstall the PS?

  I need help to reinstall photoshop. I don't have the original disc. How can I reinstall the PS?

  What version of the full scale of the PS do you need?

  Nancy O.

• Need help to write a script that opens files, removes layers and sous-calques

  Hey all,.

  I'm a noob to the community of script, and what I try to do is file edit commands that share the same names of layers and sublayers. I have a few questions that would be incredibly useful if I could have answered.

  I'm not sure how to define a script too call out of the layers that have been created without script. I need to create a variable for the existing layers and leave the script to know what their names are in the files?

  For example, I have three files which have each layer named 'cutlayer', 'trimlayer', 'fold' and 'work '. I need to write a script that opens three files, deletes the layer 'fold' of each file, and then move the layer "trimlayer" in his own sublayer in 'work' (the base layer can be on the top so reorganization sublayers is not necessary to worry about something). I do not understand how to write the script because I couldn't find examples in the documentation for the script provided on the adobe website which has worked with existing files.

  It's my shot at what I'm trying to do, with English fill in the blanks of what I do not know how to script. If anyone can help me understand this point, I would really appreciate it!

  app.documents.openDlg (prompt, filter, MultiSelect);  the user opens the associated files

  If (documents.length > 0) //run the script through each document individually

  {

  sourceDoc = activeDocument;

  delete the "fold" sourceDoc layer

  move the "trimlayer" in the layer "work."

  remove the underlayment 'path' of layer "work."

  Run the script through each document

  Save the new file name folder in the new parallel to the current folder on the hard disk

  Go out and spend in each document until there is no more

  }

  create new document

  Place documents published in different layers in the new document, with a distance between them, optimize the space on a 51 "x 51" work plan, using as little of the artboard as possible. "

  All comments are things basically, I do not know how and am trying to figure out how to do, so if anyone has a second to explain some of these things, I would really appreciate it!

  Thanks again!

  I know it of very frustrating when his apprenticeship and things don't go as planned, but understand that it is quite confusing as it is and do not add more confusion to the mix by using other tools than those provided. I mean JSLint, it might be useful with GENERAL javascript syntax, but Adobe's Javascript implementation is another animal, or another language, always JavaScript, but intended to be run by its own engine. JSLint has no idea what "layers", or "pathItems" are, it will trigger errors when he sees the objects, it does not recognize.

  .. .in learning... not to take baby, write a single line of code and run... If it works, write another line of code

  Try this version (always in the ESTK),'re missing you a few "++", and you do not change "documents" with "docs" in a certain place

  var docs = File.openDialog("Select Files to Open", "*.ai", true);
  
  var idx = 0;
  
  for (idx = 0; idx < docs.length; ++idx) {
  
      var doc = app.open(docs[idx]);
  
      var myCounter = 0;
  
      for (myCounter = 0; myCounter < doc.layers.length; myCounter++) {
  
          doc.layers[myCounter].locked = false;
  
      }
  
      doc.layers.getByName('Crease').remove();
  
      doc.layers.getByName('Regmark').remove();
  
      doc.layers.getByName('Artwork').pathItems[0].remove();
  
      doc.layers.getByName('Through Cut').hasSelectedArtwork = true;   
  
      doc.layers.getByName('Through Cut').pathItems[0].strokeColor = doc.swatches.getByName("Black").color;   
  
      doc.layers.getByName('Through Cut').move(doc.layers.getByName('Artwork'), ElementPlacement.INSIDE);
  
  }
  

• How to extract files from the Windows 7 installation CD?

  I remember that on Win98, I can use SFC. EXE to extract all those files. CAB files on the installation of Win98 CD and place the files extracted into a folder I want. In addition, I don't need to know where. CAB of the target file should be some.

  The SFC. EXE in Win7 replces only system files. It does not extract and put all the files as the SFC in Win98.

  So, how to extract files from Windows 7 installation CD?

  Hello

  ·         Why you want to extract the file from the Windows 7 DVD?

  ·         What file you want to extract?

  Some of the files will be locked or currently in use by the system so that you will not be able to replace their while that started in Windows 7. Therefore, SFC scan tool is used to repair any file corruption in windows 7.

  Design by default, you can extract the files. You can copy and paste the file into your Windows 7 DVD drive, refer to the article below:

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  Hope this helps,

• Help to install Encarta 2000 on the Windows 7 computer.

  I bought a whole new, retractable Encarta 2000, assuming it works on Windows 7. After being told several times that it was installed when it wasn't, that I came across a "compatibility" option Now it is installed and it works - except for the help file, which is "incompatible".

  My real concern is that I have to run from CD. I was not offered the ability to copy all the files from the Windows Explorer. Is there a way to get there now?

  I vaguely remember doing this many years ago.

  Thanks for any help.

  Jim,

  Chk this link:

  How to copy the Encarta CD-ROM to the hard disk (applies to windows 7)

  http://support.Microsoft.com/kb/325932/en-us

  FYI

  Encarta World Atlas 2000: How to install the program to run from your hard drive

  http://support.Microsoft.com/kb/239635/en-us

• Need help to extract the Exif data

  I can't wrap my brain on how to get an individual item in a generated table. Here's what I'm trying to do: I have a script that will read all the information of an image file's exif header. It traverses the list and display each element exif very well. If I keep stuck trying to extract specific items such as copyright, artist, and description. I took the script out of the php.net site and I understand well enough how it works completely.
  
  Can someone break it down by the measures taken by the script? I think that if I understood it better that I could figure out how to get what I need. For example, should I loop through the $exif table before I can point to the specific exif info I want? I also don't understand the exif_read_data() function parameters (I read what php.net, but it is clear to me).
  
  Thanks in advance for any help.
  Mike D
  
  

  I finally got. The code in the previous post works as what. I had the wrong variable in the "alt" tags It should have been $image_description. Problem solved.

• Need help to reset/compensation port security on a PowerConnect 35XX

  I implement port security on our network, and I've never worked with these before switches. I'm used to the Cisco CLI, who was the command exec "int sticky clear dry port", but it doesn't seem to be anything of the sort on the CLI of Dell.

  Here is the config, I have in place on the switchport in question.

  dot1x multiple-host

  safe standing of port security mode

  port security throw

  For the moment, that the port has done what is supposed to to, but remove the configuration of the interface completely that I am unable to find how the CLI reference or online at how 'quickly' to reset the port.

  Any help would be appreciated.

  Do not take into account. I found buried in the CLI reference command.

  There are actually two commands necessary to reactivate the interface

  "dot1x to re-authenticate ethernet [port]".

  'set interface active ethernet [port] ".

  Thank you

• Need help newbie extract

  Hi all

  
  

  I have a file of Web layout in Photoshop complete with several layers - and I need to extract parts of it for use on the site.

  I know a little bit of slices - but I prefer not to use that now. I thought rather to save a master tiff file with no layers - and simply copying pieces of this as needed.

  I have a background layer that is wider than the rest - and I'd rather delete this layer background everything and then save the tiff without it.

  Q: can you tell me the best way to achieve this?

  Revdave,

  You can easily follow the video below to extract the context of Photoshop.

  Remove the background of the Photo - Photoshop CS6 - YouTube

  Let me know if you need more information on this!

  See you soon

  -Florian

• Need help with problems after you download Service Pack 2 for Windows XP Home Edition

  I downloaded the havce to uninstall Service Pack 2 only because when I rebooted the computer system has 4-bit color without the possibility to change and everything was HUGE. I need to have installed so I can play Sims and get the rest of the windows downloads. I can't do anything until this issue is resolved. Has anyone else has this problem? I'm working on a new hard drive (180 MB) and I don't know if I need to update the drivers that came with my gateway first, before I can install SP2 correctly. Please someone can help me I got appriciate it! Thanks in advance! If you have any other questions I can answer.

  ~ * Heather * ~.

  aka

  ~ * Slicky * ~.

  If you get just to install WinXP SP2 for the first time ever, keep reading. If not, tell us why you need to reinstall SP2.

  ==================================

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help with drivers on HP Pavilion dv6000 series (8.1 Windows 32 bit)

  Hello! Dear Experts, first I want to apologize for my English...

  ... We're going to start, I have HP Pavilion dv6750ee whith AMD Turion (TM) 64 X 2 Mobile Technology TL-68, 2 GB of SDRAM DDR2, disk FUJITSU HARD MHY2250BH 250 GB, nVIDIA GeForce 8400 M GS 256 MB and Windows 8.1 on board...

  Problems:

  1. the coprocessor (if I translate it is correct) driver not found

  ID

  PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C & REV_A1
  PCI\VEN_10DE & DEV_0447 & SUBSYS_30CF103C
  PCI\VEN_10DE & DEV_0447 & CC_0B4000
  PCI\VEN_10DE & DEV_0447 & CC_0B40

  2. system base of the unit (if I correctly translate) driver not found

  ID

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CF103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  3 not found base system device driver

  ID

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CF103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  4 update BIOS (I have the BIOS Phoenix F.34), but BIOSAgentPlus on PhoenixBIOS.com told me that I can update my BIOS where I can take and what version (I can't buy BIOSAgentPlus account)? Help, please!

  Ideally, I want my BIOS to support the start-up of the USB Flash drive, now I don't have this feature.

  5. I have a HDMI port with the strange situation... when I have Windows 7 on board and connect the TV via HDMI, sound goes to the TV speakers...

  But on Windows 8.1 sound Laptop speakers, connected TV, what is the problem?

  5. a question about hardware update...

  My nVIDIA GeForce 8400 M GS 256 MB video card really have PCI Express and I can turn it off and put in more powerful video card, or there is no PCI Express and if I need to update the video - is a chance REBALL the chip?

  Sorry for a lot of questions!

  Thank you)

  Hello:

  You can get the BIOS to support driver page was last updated and your laptop on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3664998

  I will repeat what I mentioned earlier.

  1. There is only a Windows-based flash file.  Only company in the HP PC have BACK base of flash files and there is no way to update the BIOS from a drive, flash or BACK etc.

  2. you only need to run the Windows based flash using the operating system support (Windows Vista only).

  Any attempt to Flash the BIOS using any other operating system laptop = dead.

  The graphics card is soldered to the motherboard and cannot be removed or replaced.  It doesn't matter what said you that any software.  There is no graphics removable 'card' in your laptop.

• need help to program deleted / 32/rundll.exe file system

  need help with deteleted system32/rundll.exe.files

  Hello

  ·         What is the full error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps:

   

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Startand then click run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer.

  You can also try System File Checker analysis to repair missing files or damaged in Windows XP.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• need help to get rid of xp so I can install windows 7

  I have download kill disk and he burned on a cd and started on the cd, but he has done notheing. I'm trying to reformat the hard drive, so I can install windows 7 is there a tool for command line, I can use instead

  You can do so during the installation of Windows 7.  Moving from XP to Windows 7, you can only do a "custom" installation

  Note

  Formatting your hard drive during the installation of Windows 7 is not necessary. If you wish to format your hard drive, and you use a Windows 7 upgrade version, do not use a program from another software manufacturer to reformat your hard drive before installing Windows 7. Instead, start your PC using the Windows 7 upgrade installation disc or a USB flash drive, click Custom (Advanced) and then click drive options (Advanced).

  Make sure that your hardware can support Windows7 by running the Windows 7 Upgrade Advisor.

  Make sure that you have downloaded Windows 7 need drivers for your hardware.

  Make sure that you have backed up your files and other data that you can restore everything after installing Windows 7.  You can use Windows Easy Transfer.  If so, make sure that get you from the link below.

  Make sure you have all the installation media (CD/DVD or Installer files) for all applications that you want to reinstall once Windows 7 has been installed downloaded.

  See http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7